R08DS0128EJ0100 Rev. 1.00 Page 1 of 15
Aug 24, 2015
Data Sheet
PS8902
1 Mbps HIGH CMR ANALOG OUTPUT TYPE, 8-PIN LSDIP PHOTOCOUPLER
FOR CREEPAGE DISTANCE OF 14.5 mm
DESCRIPTION
The PS8902 is an optically coupled isolator containing a GaAlAs LED on the light emitting diode (input side) and a
PIN photodiode and a high-speed amplifier transistor on the output side on one chip.
FEATURES
Long creepage distance (14.5 mm MIN.)
8-pin LSDIP (Long Creepage SDIP) type
High-speed response (tPHL = 0.8 s MAX., tPLH = 1.2 s MAX.)
High common mode transient immunity (CMH, CML = 15 kV/
s MIN.)
Embossed tape product: PS8902-Y-F3: 1 000 pcs/reel
Pb-Free Product
Safety standards
• UL approved: No. E72 422
• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950 )
• DIN EN 60747-5-5 (VDE 0884-5) approved (Option)
APPLICATIONS
Power supply
Computer and peripheral manufactures
General purpose inverter
Substitutions for relays and pulse transformers
R08DS0128EJ0100
Rev. 1.00
A
ug 24, 2015
Start of mass production
Sep.2015
PIN CONNECTION
(Top View)
1. NC
2. Anode
3. Kathode
4. NC
5. GND
6. Vo
7. NC
8. Vcc
8567
1432
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 2 of 15
Aug 24, 2015
PACKAGE DIMENSIONS (UNIT: mm)
16.7±0.4
0.8±0.25
0.2±0.15
0.25±0.15
3.5±0.2
3.7±0.25
1.27
0.5±0.1
0.25
M
8
1
5
4
6.7±0.3
13.8±0.3
0.1 S
S
Weight: 0.642g (typ.)
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 3 of 15
Aug 24, 2015
PHOTOCOUPLER CONSTRUCTION
Parameter Unit (MIN.)
Air Distance 14.5 mm
Outer Creepage Distance 14.5 mm
Isolation Distance 0.4 mm
MARKING EXAMPLE
9905
R
N231
2N 31
No. 1 pin
Mark
Year Assembled
(Last 1 Digit)
Rank Code
Week Assembled
Assembly Lot
Type Number
Company Initial
R
8902
N425
N425
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 4 of 15
Aug 24, 2015
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification Packing Style Safety Standard
Approval Application
Part Number*1
PS8902 PS8902-Y-AX Pb-Free
(Ni/Pd/Au)
10 pcs (Tape 10 pcs cut) Standard products
(UL,CSA approved)
PS8902
PS8902-F3 PS8902-Y-F3-AX Embossed Tape 1 000
pcs/reel
PS8902-V PS8902-Y-V-AX 10 pcs (Tape 10 pcs cut) UL,CSA approved
DIN EN60747-5-5
(VDE0884-5): 2011-11
approved (Option)
PS8902-V-F3 PS8902-Y-V-F3-AX Embossed Tape 1 000
pcs/reel
Note: *1. For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
Parameter Symbol Ratings Unit
Diode Forward Current IF 25 mA
Reverse Voltage VR 5.0 V
Power Dissipation*1 PD 45 mW
Detector Supply Voltage VCC 35 V
Output Voltage VO 35 V
Output Current IO 8.0 mA
Power Dissipation*2 PC 250 mW
Isolation Voltage*3 BV 7500 Vr.m.s.
Operating Ambient Temperature TA –40 to +110 °C
Storage Temperature Tstg –55 to +125 °C
Notes *1 Reduced to 0.8 mW/C at TA = 85C or more.
*2 Reduced to5.2 mW/C at TA = 85C or more.
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-4 shorted together, 5-8 shorted together.
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 5 of 15
Aug 24, 2015
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = 16 mA 1.35 1.65 1.85 V
Reverse Current IR VR = 3 V - - 10
A
Forward Voltage
Temperature Coefficient
VF/
TA IF = 16 mA - -2.2 - mV/C
Terminal Capacitance Ct V = 0 V, f = 1 MHz - 30 - pF
Detector High Level Output Current IOH (1) IF = 0 mA, VCC = VO = 5.5 V - 0.5 500 nA
High Level Output Current IOH (2) IF = 0 mA, VCC = VO = 30 V - - 100
A
Low Level Output Voltage VOL IF = 16 mA, VCC = 4.5 V, IOL = 1.2 mA - 0.1 0.4 V
High Level Supply Current ICCH IF = 0 mA, VO = open, VCC = 30 V - 0.01 2
A
Low Level Supply Current ICCL IF = 16 mA, VO = open, VCC = 30 V - 50 -
A
Coupled Current Transfer Ratio CTR IF = 16 mA, VCC = 4.5 V, VO = 0.4 V 15 - 35 %
Input-Output
Isolation Resistance
RI-O VI-O = 1 kVDC, RH = 40 to 60% 1011 - -
Input-Output
Isolation Capacitance
CI-O V = 0 V, f = 1 MHz - 1.0 - pF
Propagation Delay Time
(H L)*1 tPHL IF = 16 mA, VCC = 5 V, RL = 2.2 k,
CL = 15 pF - 0.3 0.8
s
Propagation Delay Time
(L H)*1 tPLH - 0.5 1.2
Common Mode
Transient Immunity at
High Level Output*2
CMH IF = 0 mA, VCC = 5 V, RL = 4.1 k,
VCM = 1.5 kV,Vo>2V 15 - - kV/
s
Common Mode
Transient Immunity at
Low Level Output*2
CML IF = 16 mA, VCC = 5 V, RL = 4.1 k,
VCM = 1.5 kV, Vo<0.8V 15 - -
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 6 of 15
Aug 24, 2015
Notes *1 Test circuit for propagation delay time
Pulse input (I
F
)
V
O
(Monitor)
Input
(Monitor)
Input
Output
1.5 V
VOH
VOL
tPHL tPLH
(IF= 7.5 mA
)
50%
0 V
5 V
47 Ω
(PW = 1 µs,
Duty cycle = 1/10) RL = 20 kΩ
VCC = 5 V
0.1 µF
CL = 100 pF
PS8902
Remark C
L
includes probe and stray wiring capacitance.
*2 Test circuit for common mode transient immunity
VO (Monitor)
0.1
µF
V
CM
V
CM
=1.5K
V
10 %90 %
10 % 90 %
0 V
5 V
2 V
t
r
t
f
V
O
V
O
(I
F
= 0 mA)
(I
F
= 16 mA)
0.8 V
V
OL
V
CM
18
27
36
45
I
F
V
CC
= 5 V
R
L
C
L
= 15 pF
SHIELD
PS8902
Remark C
L
includes probe and stray wiring capacitance.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity
when handling.
2. By-pass capacitor of 0.1
F is used between VCC and GND near device. Also, ensure that the distance between the leads of the
photocoupler and capacitor is no more than 10 mm.
3. Avoid storage at a high temperature and high humidity.
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 7 of 15
Aug 24, 2015
TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
0
5
10
15
20
25
30
35
40
45
50
0 20 40 60 80 100 120 0 20 40 60 80 100 120
0
50
100
150
200
250
300
0.1
1
10
100
1000
-25 0 25 50 75 100 125
0
10
20
30
40
50
60
70
80
90
100
0.5 5 50
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
-50 -25 0 25 50 75 100 125
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
Forward Voltage (V)
Forward Current IF (mA)
Ambient Temperature Ta (°C)
Diode Power Dissipation vs. Ambient Temperature
Forward Current vs. Forward Voltage
Current Transfer Ratio vs. Forward Current
High Level Output Current vs. Ambient Temperature
Current Transfer Ratio
Diode Power Dissipation PD (mW)
Detector Power DissipationC PD (mW)
Forward Current IF (mA)
Current Transfer Ratio CTR (%)
Current Transfer Ratio CTR High Level Output Current IOH (nA)
Detector Power Dissipation vs. Ambient Temperature
IF = 0mA
Vcc=Vo=5.5V
Vcc=Vo=30V
Vcc = 4.5V
Vo = 0.4V
Normalized to 1.0 at Ta=25ºC
IF = 16mA
Vcc = 4.5V
Vo = 0.4V
11.5 2.42
0.01
0.1
1
10
100
T
A
= +110°C
+100°C
+85°C
+50°C
+25°C
−20°C
−40°C
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 8 of 15
Aug 24, 2015
TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
0
2
4
6
8
10
0 2 4 6 8 10 12 14 16 18 20 0 2 4 6 8 10 12 14 16 18 20
0
1
2
3
4
5
6
0
1
2
3
0 5 10 15 20 25
0.1
1
10
110100
0
0.5
1
1.5
2
2.5
3
-50 -25 0 25 50 75 100 125
Output Current vs. Output Voltage Output Voltage vs. Forward Current
Propagation Delay Time vs. Forward Current Propagation Delay Time vs. Load Resistance
Propagation Delay Time vs. Ambient Temperature
Output Current (mA)
Output Voltage Vo (V)Propagation Delay Time TPHL, TPLH (µs)
Propagation Delay Time TPHL, TPLH (µs)Propagation Delay Time TPHL, TPLH (µs)
Forward Current IF (mA)Output Voltage Vo (V)
Forward Current IF (mA) Load Resistance RL (KΩ)
Ambient Temperature Ta (°C)
IF = 15mA
IF = 10mA
IF = 5mA
IF = 25mA
IF = 20mA
RL = 2.2KΩ
5.6KΩ
Vcc = 5V
RL = 2.2KΩ
Vcc = 5V
IF = 16mA
T
PLH
T
PLH
T
PLH
T
PHL
T
PHL
T
PHL
IF = 16mA
Vcc = 5V
RL = 2.2KΩ
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 9 of 15
Aug 24, 2015
TAPING SPECIFICATIONS (UNIT: mm)
330±2.0
100±1.0
2.0±0.5
13.0±0.2
R 1.0 21.0±0.8
2.0±0.5
25.5±1.0
29.5±1.0
PS8902-F3
2.0±0.1
4.0±0.1
1.75±0.1
24.0±0.3
1.5
+0.1
–0
4.5 MAX.
(17.2)
(0.3)
11.5±0.1
(7.2)
(4.05)
12.0±0.1 2.0±0.2
Tape Direction
Outline and Dimensions (Tape)
Outline and Dimensions (Reel)
Packing: 1 000 pcs/reel
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 10 of 15
Aug 24, 2015
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
2
0.91.27
16.6
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 11 of 15
Aug 24, 2015
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature 260C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220C 60 seconds or less
• Time to preheat temperature from 120 to 180C 12030 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlori ne content of 0.2 Wt% is recommended.)
120±30 s
(preheating)
220°C
180°C
Package Surface Temperature T (°C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260°C MAX.
120°C
(2) Wave soldering
• Temperature 260C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2
Wt% is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature) 350C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum
chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 12 of 15
Aug 24, 2015
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output transistor
may enter the on state, even if the voltage is within the absolute maximum ratings.
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 13 of 15
Aug 24, 2015
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter Symbol Spec. Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1) 40/110/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.6 UIORM., Pd 5 pC
UIORM
Upr
1 600
2 560
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 UIORM., Pd 5 pC
Upr 3 000 Vpeak
Highest permissible overvoltage UTR 12 000 Vpeak
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) CTI 175
Material group (DIN EN 60664-1 VDE0110 Part 1) III a
Storage temperature range Tstg –55 to +125 °C
Operating temperature range TA –40 to +110 °C
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
VIO = 500 V dc at TA MAX. at least 100°C
Ris MIN.
Ris MIN.
1012
1011
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Tsi
Isi
Psi
Ris MIN.
175
400
700
109
°C
mA
mW
Dependence of maximum safety ratings with package temperature
0
100
200
300
400
500
600
700
800
900
1000
0 25 50 75 100 125 150 175 200
Package temp Tsi (°C)
Total Power Dissipation Psi (mW)
Input Current Isi (mA)
Psi: Total Power Dissipation
Isi: Input Current
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 14 of 15
Aug 24, 2015
Method a Destructive Test, Type and Sample Test
t
1
t
ini
t
2
t
3
t
m
t
4
V
INITIAL
=12000V
V
pr
=2560V
V
IORM
=1600V
V
t
t
1
,t
2
= 1 to 10 sec
t
3
,t
4
= 1 sec
t
m(PARTIAL DISCHARGE)
= 10 sec
t
test
= 12 sec
t
ini
= 60 sec
t
test
Method b Non-destructive Test, 100% Production Test
Vpr =3000V
VIORM =1600V
t3tpt4
V
t3,t4 = 0.1 sec
tm(PARTIAL DISCHARGE)= 1.0 sec
ttest = 1.2 sec
ttest t
PS8902
R08DS0128EJ0100 Rev. 1.00 Page 15 of 15
Aug 24, 2015
Caution GaAs Products This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
All trademarks and registered trademarks are the property of their respective owners.
C - 1
Revision History PS8902 Data Sheet
Rev. Date Description
Page Summary
1.00 Aug 24, 2015 First edition issued
Notice
1. Descriptions of circuits, s o ftwar e and ot h er related inf o r m a tion in this document a re p ro v id ed only to illustrate the operation of semic ondu ctor produc t s an d appl ic ation ex am pl es . Y ou ar e fully r es pon si bl e f or
the incorp orat i on of thes e cir c ui ts, software, and i nfor mation in the des i gn of your eq ui pment. Renesas Elec tronics a ssum es no r es po nsibility f o r any los s e s incu r red by you or third parties aris in g from the
use of these circuits, soft ware, or inf ormat ion.
2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
assumes no liability what soever for any damages incurred by you resulting fr o m errors in o r omissions from the information incl uded herein.
3. Renesas El ectronics d oes no t assum e any liability for infrin gement of patents , copyr ights, or o ther int e llectual property rights of third part ies by or arising fr om the use of Renesas Electronics products or
technical information described in this document. No license, express, implied or otherwise, is grant ed hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics ass um e s no responsibility f or a ny losses inc u r red by you or
third parties aris i n g from s uch alteration, mod i fica tion, co py or o ther w ise mi s appropriation of Renesas E l ectronic s prod uct.
5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". T he recomm ended applications for each Renesas Electronics product depends on
the p r oduct' s quality grade, as indicated bel ow.
"Standard" : Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electroni c appliances; m a chine tools; persona l el e ctronic
equipment; and industrial robots etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.
Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artific ial life support devices o r systems, surgical
implantatio ns etc.), or may cause s e rio us property damages (nuc lear reacto r control s y stems, military equipme nt etc. ). Y o u mu st check the qualit y grade of ea ch Renesas El ectronic s prod uct b efor e using it
in a particular application. You may not use any Renesas Electronics product for any application for which it is not int ended. Renesas Electronics shall not be in any way liable for any damages or losses
incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electroni cs.
6. You should use th e Renesas Electron i c s prod ucts described in t h i s document wi thin the r an ge spec i fied by Renes a s Elec tro ni cs, especially with respect to t he maximum rating, operating supply voltage
range, movement powe r voltage range, heat radi ation c haracter i sti cs, installation an d other product chara cter i sti cs. Renes as Elec t r onics shall have no liability f o r malf unc t ions or damages aris ing out of t he
use of Renesas E l ectronics prod ucts beyond such specif ied range s.
7. Although Renes as E lectronic s endeavors t o im pr o v e the quality a nd reliability of its p ro duc ts, s em iconductor products hav e s p ecif ic characteristics such as the occurrence of failure at a certain rate and
malf uncti ons un der c er t a in use condition s. Fur ther , Ren es as E le ctron ic s pr od uc t s ar e no t s ub jec t to r ad iation r es is tanc e des ig n. Please be sure to implement safety measures to guard them against the
possibility of physical injury , and injury or dam age caused by f ir e in the event of t he failur e of a Renesas Elec t r onics pr oduct , such as safety design for hardware and software including but not limited to
redundancy, f ire contr ol and malf un ctio n prevention , appropria te t reatment f o r aging degrada tion o r any other a ppropr i ate m e asur es. Because the evaluatio n of m i c rocomput e r softwa re alone i s very diff icult ,
please evaluate the safety of the final products or systems manufactured by you.
8. Ple as e c ontact a Renes as El ec t ronic s s ale s offi ce f or de t a ils as t o en vi r on me nt al m at ter s s uch as t h e env ir onm e ntal com p at i bi li ty of eac h Renesas Electr onics p roduct. Pleas e use Re ne sas E l e ctronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for dam ages or los ses occ urr ing as a result of y our noncom pliance wit h applicable laws and regulat ions.
9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use , or sale is pro hibit ed under any applicable domes t ic or fo r eign laws or
regulations. You s ho ul d not use Renesas Electroni cs products or te chnolog y described in this docu ment for any pu rpose relat i n g to military applic ations or use b y the milita r y, including but not lim ited to the
development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply wit h the ap pl i cable export con trol laws and
regulations and f ollow the pr ocedur es req ui red by such l a ws and r egulat i o ns.
10. It is the r es pon s ibility of the buyer or dist r ibutor of Renesas Ele c tronics p r oduc ts, who distr i butes, disposes of , or otherwise places the product with a third party , to notify such third party in advance of the
content s a nd conditions set for th in t his doc u ment, Renes as Electronics ass um e s no re s pons ibility f or any losses in c ur red by you or third parties as a result of unauthorized use of Renesas Electronics
products.
11. T his document m ay not be reproduced or duplicated in any form, in whole or in part, without prior writ ten consent of Renesas Electronics.
12. Ple ase contact a Renesas Elec tronics sales off i ce if you have any q uestions regardi ng th e i n format i o n contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) "Renesas Electronics" as used in this document m eans Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s) " means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
Refer to "http://www.renesas.com/" for the latest and detailed information.
California Eastern Laboratories, Inc.
4590 Patrick Henry Drive, Santa Clara, California 95054-1817, U.S.A.
Tel: +1-408-919-2500, Fax: +1-408-988-0279
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628-585-900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-6503-0, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333
Tel: +86-21-2226-0888, Fax: +86-21-2226-0999
Renesas Electronics Hong Kong Limited
Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2265-6688, Fax: +852 2886-9022
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949
Tel: +65-6213-0200, Fax: +65-6213-0300
Renesas Electronics Malaysia Sdn.Bhd.
Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics India Pvt. Ltd.
No.777C, 100 Feet Road, HALII Stage, Indiranagar, Bangalore, India
Tel: +91-80-67208700, Fax: +91-80-67208777
Renesas Electronics Korea Co., Ltd.
12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
SALES OFFI CES
© 2015 Renesas Electronics Corporation. All rights reserved.
Colophon 5.0
