Features
n Compensated output
n Direct-media monitoring
n Gauge and absolute types
n Isolated onboard electronics
n Gold-plated Kovar™ port option
n RoHS compliant*
Applications
Industrial:
n Refrigerant systems
n Water level & pressure monitoring
**Medical Devices (low/medium risk):
n Diagnostic/analysis equipment
***Heavy Equipment:
n Oil & fuel systems
n Exhaust gas pressure sensing
BPS130 Series - 10 mm Analog High Pressure Sensor
* RoHS3 Directive 2015/863 Amendments of Annex II on March 31, 2015
** Bourns® products have not been designed for and are not intended for use in
“lifesaving,” “life-critical” or “life-sustaining” applications nor any other applications
where failure or malfunction of the Bourns® product may result in personal injury or
death. See Legal Disclaimer Notice on the last page of this document, and at
www.bourns.com/docs/legal/disclaimer.pdf.
*** Custom engineered solutions. Check with factory for availability.
**** 5 V input voltage.
“Kovar” is a trademark of CRS Holdings, Inc., Delaware.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as
set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Electrical Characteristics
Supply Voltage (Vs) ............................................................................................................................ 4.5 V minimum, 5 V typical, 5.5 V maximum
Supply Current................................................................................................................................................................................................10 mA
Output Current ...............................................................................................................................................................................................2.5 mA
Short Circuit Current .....................................................................................................................................................................................±25 mA
Reverse Polarity Protection ............................................................................................................................................................................. -33 V
Overvoltage Protection ..................................................................................................................................................................................... 33 V
Performance Characteristics
Operating Temperature ................................................................................................................................. -40 °C to +150 °C (-40 °F to +302 °F)
Storage Temperature .................................................................................................................................... -55 °C to +150 °C (-67 °C to +302 °F)
Output Range Vout**** ................................................................................................................................................................... 10 % to 90 % Vs
Output Clamping Limit Vout**** .......................................................................................................................................................... 5% to 95% Vs
Resolution (>12 bit DAC) .........................................................................................................................................................................0.02 % FS
Accuracy @ 25 °C ................................................................................................................................................................................. ±0.25 % FS
Total Error Band @ -40 °C to +150 °C (-40 °F to +302 °F)......................................................................................................................±2.5 % FS
Static Proof Pressure................................................................................................................................................................... 2X full scale PSIA
Burst Pressure ............................................................................................................................................................................. 3X full scale PSIA
Lifetime Drift ............................................................................................................................................................................................±0.5 % FS
Product Characteristics
Media Compatibility ..............................................................................................................................................Harsh media (air, liquid and gas)
Moisture Sensitivity Level .......................................................................................................................................................................................1
ESD Classication (HBM)................................................................................................................................................................................>4 kV
Marking .................................................................................. Partial model number, media compatibility, pressure type, pressure rating, lot code
Standard Packaging ......................................................................................................................................250 pcs./13-inch reel or 200 pcs./tray
Weight .................................................................................................................................................................................1.080 grams (0.038 oz)
Consult factory for custom options such as supply voltage,
temperature calibration range, output range accuracy
specication, and update rate.
Basic Circuit Schematic
Vs
GND
Vout
ANALOG
OUT
SSC
Note: Power supply decoupling and output ltering included.
Cross Section
MEMS Sensing Element
Capacitor
Solder Pad
ASIC
Pressure
Asia-Pacic: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
“Wetted” Materials: Silicon, glass, Au/Sn, ceramic
(Ported version also contains Au and solder)
Any material in contact with the media is
considered a “wetted” material.
BPS130 Series - 10 mm Analog High Pressure Sensor
BPS130 Series - 10 mm Analog High Pressure Sensor
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Product Dimensions
8.9
(0.350)
10.3
(0.406)
12.8
(0.504)
9.0
(0.354) 7.6
(0.299)
1.4
(0.055)
Vs GND Vout
1.0
(0.039)
4.2
(0.165)
6.35
(0.250) 1.0
(0.039)
DIA.
3.1
(0.122)
0.8
(0.031) DIA.
1.3
(0.051) DIA.
.025
(0.001)
DIA.
6.35
(0.250)
5.1
(0.201)
8.6
(0.339)
7.9
(0.331)
3.1
(0.122)
.025
(0.001)
DIA.
TOLERANCES: 0.3
(0.012)
DIMENSIONS: MM
(INCHES)
Manifold Mount
Single Port
(Electrical pin-out for all congurations)
9.7
(0.382)
0.51
(0.020) TYP.
2.54
(0.100)
TYP.
2.54
(0.100)
TYP.
0.25
(0.010) TYP.
3312 - 2 mm SMD Trimming Potentiometer
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
BPS130 Series - 10 mm Analog High Pressure Sensor
Product Dimensions (Continued)
DIMENSIONS: MM
(INCHES) TOLERANCES: 0.3
(0.012)
How To Order
BPS130 - H G 015P - 3 M G
Model Series
Analog
Media Compatibility
H = Harsh Media
Pressure Type
A = Absolute
G = Gauge
Pressure (psi)
015P = 15 300P = 300
030P = 30 500P = 500
100P = 100
Terminal Pins
1 = No Terminal Pins
3 = Vertical Terminal Pins (Tray Packaging only)
Port Style
M = Manifold Mount
S = Single Port
Packaging Designator
G = 250 pcs. per 13-inch Reel
Blank = 200 pcs. per Tray
Single Port and Pins
REV. 01/19
3312 - 2 mm SMD Trimming Potentiometer
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
BPS130 Series - 10 mm Analog High Pressure Sensor
Solder Prole
300
250 °C Max.
(5 Seconds Max.)
150 ±5 °C
Time
200
100
80-100 Seconds
Processing Method: Reflow soldering with infrared heat or forced air convection (only once).
60 Seconds Max.
TEMPERATURE (°C)
Notes:
1. No clean solder paste is recommended.
2. Aqueous wash is not recommended.
3. Use of water soluble soldering ux
should be avoided due to possible
corrosion.
4. Multiple passes through the soldering
process is not recommended.
5. Other SMD processes and proles
should be veried by the customer.
250 pieces per 13-inch reel.
Meets specications of EIA-481-1 or EIA-481-2.
Packaging Specication
DIMENSIONS: MM
(INCHES) TOLERANCES: 0.25
(0.010)
25.4
(1.0)
29.21
(1.15)
330.2
(13.0) DIA.
20.32
(0.8) DIA.
12.7
(0.5) DIA.
101.6
(4.0) 24.0
(0.945)
11.5
(0.453)
3.81
(0.15)
EQUAL SPACED
3 PLCS. 2.0
(0.079)
4.0
(0.157)
16.0
(0.630)
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
(32 ?+( 3$2".++$"3(5$+8:.41-2;
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
6(3'.43-.3("$2$122'.4+#"'$"*%.1 -#.!3 (-3'$+ 3$231$+$5 -3(-%.1, 3(.- -#5$1(%83' 324"'(-%.1, 3(.-(2"411$-3
and complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns®/1.#4"3(- 42$1 //+(" 3(.-, 85 18
%1.,3'$# 3 2'$$3"' 1 "3$1(23("2 -#/ 1 ,$3$12#4$3.(3'$".,!(- 3(.-.%3'$.41-2® product with other components
(-3'$42$1<2 //+(" 3(.-.1((3'$$-5(1.-,$-3.%3'$42$1 //+(" 3(.-(32$+%'$"' 1 "3$1(23("2 -#/ 1 ,$3$12.% .41-2®
/1.#4"3 +2." - -##.5 18(-#(>$1$-3 //+(" 3(.-2 -# "34 +/$1%.1, -"$, 85 18.5$13(,$2$122'.4+# +6 825$1(%8
the actual performance of the Bourns®/1.#4"3(-3'$(12/$"(="#$5("$2 -# //+(" 3(.-2 -#, *$3'$(1.6-(-#$/$-#$-3
)4#&,$-321$& 1#(-&3'$ ,.4-3.% ##(3(.- +3$23, 1&(-3.#$2(&-(-3.3'$(1#$5("$.1 //+(" 3(.-3.".,/$-2 3$%.1
#(>$1$-"$2!$36$$-+ !.1 3.18 -#1$ +6.1+#".-#(3(.-2
-+$22.41-2' 2$7/+("(3+8#$2(&- 3$# -(-#(5(#4 +.41-2® product as meeting the requirements of a particular industry
23 -# 1#$&.1 / 13("4+ 104 +(=" 3(.-$&+(23$#.11$".&-(9$#.41-2(2-.31$2/.-2(!+$%.1 -8
% (+41$.% -(-#(5(#4 +.41-2®/1.#4"33.,$$33'$1$04(1$,$-32.%24"'(-#4231823 -# 1#.1/ 13("4+ 104 +(=" 3(.-2$12
of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to
3'$(1#$5("$2.1 //+(" 3(.-2
Bourns®/1.#4"32 1$-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$#%.142$(--4"+$ 1+(%$2 5(-&+(%$"1(3(" +.1+(%$2423 (-(-&
//+(" 3(.-2-.1(- -8.3'$1 //+(" 3(.-26'$1$% (+41$.1, +%4-"3(.-, 81$24+3(-/$12.- +(-)418#$ 3'.12$5$1$/1./$138
.1$-5(1.-,$-3 +# , &$-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2
on a case-by-case basis, use of any Bourns®/1.#4"32(-24"'4- 43'.1(9$# //+(" 3(.-2,(&'3-.3!$2 %$ -#3'42(2 3
3'$42$1<22.+$1(2*(%$"1(3(" + //+(" 3(.-2(-"+4#$#$5("$2(#$-3(=$#!83'$..# -#14&#,(-(231 3(.- 2+ 22
#$5("$2 -#&$-$1 ++8$04(5 +$-3"+ 22(=" 3(.-2.432(#$.%3'$-(3$#3 3$2
.41-2$7/1$22+8(#$-3(=$23'.2$.41-2®23 -# 1#/1.#4"323' 3 1$24(3 !+$%.142$(- 43.,.3(5$ //+(" 3(.-2.-24"'
/1.#4"32<# 3 2'$$32(-3'$2$"3(.-$-3(3+$#://+(" 3(.-2;-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836.
43'.1(9$#.41-21$/1$2$-3 3(5$2.- " 2$!8" 2$! 2(242$.% -8.3'$1.41-2®23 -# 1#/1.#4"32(- - 43.,.3(5$
//+(" 3(.-,(&'3-.3!$2 %$ -#3'42(2-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$# -#(2 33'$42$1<22.+$1(2*%.41-2
$7/1$22+8(#$-3(=$2 24!" 3$&.18.% 43.,.3(5$ //+(" 3(.-(-3'$# 3 2'$$3%.1(3223 -# 1#/1.#4"3224"' 2(-%.3 (-,$-3
.1+(&'3(-&24"'(#$-3(=" 3(.-,$ -23' 3.41-2' 21$5($6$#(3223 -# 1#/1.#4"3 -#' 2#$3$1,(-$#3' 3(%24"'.41-2®
23 -# 1#/1.#4"3(2".-2(#$1$#%.1/.3$-3( +42$(- 43.,.3(5$ //+(" 3(.-2(32'.4+#.-+8!$42$#(-24"'24!" 3$&.18.%
43.,.3(5$ //+(" 3(.-2-81$%$1$-"$3..41-2®23 -# 1#/1.#4"3(-3'$# 3 2'$$3 2".,/+( -36(3'3'$23 -# 1#
.1: 43.,.3(5$&1 #$;#.$2-.3!8(32$+%,$ -3' 3.41-2' 2 //1.5$#24"'/1.#4"3%.142$(- - 43.,.3(5$ //+(" 3(.-
Bourns®23 -# 1#/1.#4"32 1$-.33$23$#3.".,/+86(3'-(3$#3 3$2$#$1 +5( 3(.-#,(-(231 3(.-23 -# 1#2&$-$1 ++8
.1 -8.3'$1&$-$1 ++8$04(5 +$-3&.5$1-,$-3 +.1& -(9 3(.-23 -# 1# //+(" !+$3./1.#4"32#$2(&-$#.1, -4% "341$#%.1
42$(- (1"1 %3.12/ "$ //+(" 3(.-2.41-2$7/1$22+8(#$-3(=$2.41-2® standard products that are suitable for use in aircraft
.12/ "$ //+(" 3(.-2.-24"'/1.#4"32<# 3 2'$$32(-3'$2$"3(.-$-3(3+$#://+(" 3(.-2;-+$22$7/1$22+8 -#2/$"(=" ++8
//1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2.- " 2$!8" 2$! 2(242$.% -8.3'$1.41-2® standard
/1.#4"3(- - (1"1 %3.12/ "$ //+(" 3(.-,(&'3-.3!$2 %$ -#3'42(2-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$# -#(2 3
the user’s sole risk.
'$42$ -#+$5$+.%3$23(-& //+(" !+$3..41-2® custom products shall be negotiated on a case-by-case basis by Bourns
and the user for which such Bourns®"423.,/1.#4"32 1$2/$"( ++8#$2(&-$#!2$-3 61(33$- &1$$,$-3!$36$$-.41-2
-#3'$42$11$& 1#(-&3'$42$ -#+$5$+.%24"'3$23(-&3'$ !.5$/1.5(2(.-2 //+(" !+$3..41-2® standard products shall
also apply to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns®/1.#4"32.13$"'-.+.&8%.142$(- "3(5(3($26'("'(-5.+5$3'$
#$2(&-#$5$+./,$-3/1.#4"3(.-42$.123."*/(+(-&.%-4"+$ 1"'$,(" +.1!(.+.&(" +6$ /.-2.1,(22(+$2-.12' ++3'$842$
Bourns®/1.#4"32.13$"'-.+.&8(- -8% "(+(386'("'$-& &$2(- "3(5(3($21$+ 3(-&3.24"'#$5("$2'$%.1$&.(-&1$231("3(.-2
//+83. ++42$2 -# //+(" 3(.-23' 35(.+ 3$- 3(.- +.1(-3$1- 3(.- +/1.'(!(3(.-2(-"+4#(-&$,! 1&.2.1(-3$1- 3(.- +
1$&4+ 3(.-2413'$1.41-2® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without
/1(.1 43'.1(9 3(.-%1.,.41-2 -#.13'$.5$1-,$-3!$1$2.+#31 -2%$11$#.11$$7/.13$#3. -8/ 138-.3$+(&(!+$
3.1$"$(5$".,,.#(3($22.%36 1$ -#3$"'-(" +# 3 
.3'$, 7(,4,$73$-3/$1,(33$#!8 //+(" !+$+ 6.41-2#(2"+ (,2( -8 -# +++( !(+(38%.12/$"( +/4-(3(5$".-2$04$-3( +
(-"(#$-3 +.1(-#(1$"3# , &$2.1+.231$5$-4$2.1+.23/1.=32 -#(( -8 -# ++(,/+($#6 11 -3($2(-"+4#(-&(,/+($#6 11 -3($2
.%=3-$22%.1/ 13("4+ 1/41/.2$-.-(-%1(-&$,$-3 -#,$1"' -3 !(+(38
 
bilingual versions are available at:
Web Page:
http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
