PK605
Low Oil-Bleeding Thermal Conductive Gel
Features-
•Thermal conductivity:6.0W/m*K
•Low thermal impedance
•Naturally tacky for ease of manufacture
•High breakdown voltage
•UL 94V-0 qualified
Typical Applications-
•Notebook computers
•Heat pipe assemblies
•Memory modules
•TV hardware
•Automotive electronics
•Mobile devices
•High speed mass storage drives
•Set top box
•IP CAM
Specifications-
•Sheet form
•Die-cut parts
LiPOLY PK605 is a 6.0 W/m*K gap filler
designed to offer the combination of high
thermal conductivity, ease of manufac-
ture and economic pricing needed for
today's most demanding of applications.
This product can be supplied as standard
sheets, custom die-cuts or custom
molded parts making it suitable for a wide
range of applications. PK605 is also UL
94V-0 approved and REACH and RoHS
compliant.
-
SHIU LI TECHNOGY CO.,LTD
Oil Bleeding-
Oil absorbing sheets Oil bleeding width is 7 mm
PK605
Oil
Compression
50%
TEST METHOD
Visual
-
-
ASTM D374
ASTM D792
ASTM D2240
ASTM D149
ASTM D257
ASTM D257
ASTM D5470
ASTM D5470
ASTM D5470
ASTM D5470
UL94
PROPERTY
Color
Surface tack 2-side/1-side
Thickness
Density
Hardness
Application temperature
ELECTRICAL
Dielectric breakdown
Surface resistivity
Volume resistivity
THERMAL
Thermal Conductivity
Thermal impedance@10psi
Thermal impedance@30psi
Thermal impedance@50psi
FLAME RATING
UL Flammability class V-0
UNIT
-
-
-
mm
Shore OO
KV/mm
Ohm
Ohm-m
W/m*K
Typical Properties-
0
PK605
Red
2
Customized
3.2
60
-60~180
8
6.0
0.37
0.32
0.26
%
%
%
%
%
ASTM D5470 modify
ASTM D5470 modify
ASTM D5470 modify
ASTM D5470 modify
ASTM D5470 modify
COMPRESSION@1.0mm
Deflection @10 psi
Deflection @20 psi
Deflection @30 psi
Deflection @40 psi
Deflection @50 psi
8
12
14
17
19
All specifications provided by LiPOLY are subject to change without notice. The test methods used by LiPOLY are based on the TIM Tester method and ASTM D5470 test method. These test methods are used as the definition standards for LiPOLY. Property values provided in this
document are not for product specifications or guaranteed. This document does not guarantee the performance and quality required for the purchaser’s specific purpose. The purchaser needs to evaluate and verify the safety before using the material. We strongly recommend
the purchaser pre-test the product and verify the performance of the product under the purchaser’s specific conditions. Liability and use of the product are the responsibility of the end user. LiPOLY makes no warranty as to the suitability, merchantability, or non-infringement of
any LiPOLY material or product for any specific or general uses. LiPOLY shall not be liable for incidental or consequential damages of any kind. All LiPOLY products are sold in accordance with the LiPOLY Terms and Conditions in eect at the time of purchase and a copy of which
will be furnished upon request. All rights reserved, including LiPOLY trademarks or registered trademarks of LiPOLY or its ailiates. Statements concerning possible or suggested uses made herein shall not be relied upon or be constructed as a guaranty of patent infringement.
Copyright 2019 LiPOLY.
