CLD-AP42 REV 4
BINNING & LABELING
Cree® XLamp® ML Family LEDs
WWW. CREE.COM/XLAMP
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
TABLE OF CONTENTS
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is
not a warranty or a specication. For product specications, please see the data sheets available at www.cree.com. For warranty
information, please contact Cree Sales at sales@cree.com.
Bin and Order-Code Format ............................... 2
Performance Groups – Brightness ....................... 2
Performance Groups – Chromaticity .................... 3
Cree’s Standard Chromaticity Regions Plotted
on the 1931 CIE Curve ...................................... 6
Cree’s Standard Cool White Kits Plotted on ANSI
Standard Chromaticity Regions ........................... 7
Cree’s Standard Warm and Neutral White Kits Plotted
on ANSI Standard Chromaticity Regions .............. 9
Cree’s Standard Chromaticity Kits ......................11
Standard Order Codes and Bins
ML-B Cool White ..........................................12
ML-B Warm White ........................................12
ML-C Parallel, Cool White ..............................14
ML-C Parallel, Warm White ............................15
ML-E Parallel, Cool White ..............................17
ML-E Parallel, Warm White ............................18
ML-C Series, Cool White................................20
ML-C Series, Warm White .............................22
ML-E Series, Cool White ................................24
ML-E Series, Warm White .............................. 25
ML-E Color ..................................................27
INTRODUCTION
This document describes the product nomenclature
required to select and order Cree’s XLamp ML family
of LEDs. XLamp ML family LEDs are tested and sorted
into bins which are then combined into orderable kits
identied by an order code.
All XLamp LEDs are tested and sorted by color and
brightness into a unique bin. Each bin contains LEDs
from only one color and brightness group and is
uniquely identied by a bin code. White XLamp LEDs
are sorted by chromaticity (color) and luminous ux
(brightness). Color XLamp LEDs are sorted by domi-
nant wavelength (color) and luminous ux (bright-
ness). LEDs are shipped on reels containing LEDs from
one bin and are always labeled with the appropriate
bin code.
Kits contain LEDs from a number of similar bins and
are fully dened by their order codes. A full explana-
tion of the order codes for XLamp ML family LEDs, as
well as a list of standard order codes, is provided in
this document.
2
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
BIN AND ORDER-CODE FORMAT
Bin codes and order codes are congured in the following manner:
PERFORMANCE GROUPS – BRIGHTNESS
White XLamp ML family LEDs are tested for luminous ux and placed into one of the following luminous-ux groups:
Group Code Min. Luminous Flux Max. Luminous Flux
F0*
F2
F3
10.7
10.7
12.3
13.9
12.3
13.9
G0
G2
G3
13.9 13.9
15.8
18.1 15.8
18.1
H0*
H2
H3
18.1
18.1
20.6
23.5
20.6
23.5
J0*23.5 30.6
J2 23.5 26.8
J3 26.8 30.6
K2 30.6 35.2
K3 35.2 39.8
M2 39.8 45.7
M3 45.7 51.7
N2 51.7 56.8
N3 56.8 62
SSSCCC-BB-WWW-FF-A-AAAAA
Chromaticity code
Luminous flux group
Internal code
Color/Configuration
AWT = White - Parallel
SWT = White - Series
BLU = Blue
GRN = Green
RED = Red
Series
MLE = ML-E
MLC = ML-C
MLB = ML-B
Optical Configuration
A1 = Typical CRI
H1 = 80 CRI Minimum
P1 = 85 CRI Minimum
U1 = 90 CRI Minimum
SSSCCC-BB-HHHH-NNNFGG
Series
MLE = ML-E
MLC = ML-C
MLB = ML-B
Optical Configuration
A1 = Typical CRI
H1 = 80 CRI Minimum
P1 = 85 CRI Minimum
U1 = 90 CRI Minimum
Internal code
Color/Configuration
AWT = White - Parallel
SWT = White - Series
BLU = Blue
GRN = Green
RED = Red
Flux
Chromaticity
Bin Code
Order Code
Notes:
• Flux codes F0, G0 and H0 are further subdivided into F2, F3, G2, G3 and H2, H3, respectively. Orders for the F0 ux code may be lled with either F2 or F3 sub-codes,
orders for the G0 ux code may be lled with either G2 or G3 sub-codes, orders for the H0 ux code may be lled with H2 or H3 sub-codes, and orders for the J0 ux code
may be lled with J2 or J3 sub-codes.
3
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
PERFORMANCE GROUPS – CHROMATICITY
Region xy Region xy Region xy Region xy
0A
0.2950 0.2970
0B
0.2920 0.3060
0C
0.2984 0.3133
0D
0.2984 0.3133
0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.3048 0.3207
0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3068 0.3113
0.3009 0.3042 0.2984 0.3133 0.3048 0.3207 0.3009 0.3042
0R
0.2980 0.2880
0S
0.2895 0.3135
0T
0.2962 0.3220
0U
0.3037 0.2937
0.2950 0.2970 0.2870 0.3210 0.2937 0.3312 0.3009 0.3042
0.3009 0.3042 0.2937 0.3312 0.3005 0.3415 0.3068 0.3113
0.3037 0.2937 0.2962 0.3220 0.3028 0.3304 0.3093 0.2993
1A
0.3048 0.3207
1B
0.3028 0.3304
1C
0.3115 0.3391
1D
0.3130 0.3290
0.3130 0.3290 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373
0.3144 0.3186 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261
0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186
1R
0.3068 0.3113
1S
0.3005 0.3415
1T
0.3099 0.3509
1U
0.3144 0.3186
0.3144 0.3186 0.3099 0.3509 0.3196 0.3602 0.3221 0.3261
0.3161 0.3059 0.3115 0.3391 0.3205 0.3481 0.3231 0.3120
0.3093 0.2993 0.3028 0.3304 0.3115 0.3391 0.3161 0.3059
2A
0.3215 0.3350
2B
0.3207 0.3462
2C
0.3290 0.3538
2D
0.3290 0.3417
0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490
0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369
0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300
2R
0.3222 0.3243
2S
0.3196 0.3602
2T
0.3290 0.3690
2U
0.3290 0.3300
0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369
0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245
0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180
3A
0.3371 0.3490
3B
0.3376 0.3616
3C
0.3463 0.3687
3D
0.3451 0.3554
0.3451 0.3554 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620
0.3440 0.3427 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487
0.3366 0.3369 0.3371 0.3490 0.3451 0.3554 0.3440 0.3427
3R
0.3366 0.3369
3S
0.3381 0.3762
3T
0.3480 0.3840
3U
0.3440 0.3428
0.3440 0.3428 0.3480 0.3840 0.3571 0.3907 0.3515 0.3487
0.3429 0.3307 0.3463 0.3687 0.3551 0.3760 0.3495 0.3339
0.3361 0.3245 0.3376 0.3616 0.3463 0.3687 0.3429 0.3307
4A
0.3530 0.3597
4B
0.3548 0.3736
4C
0.3641 0.3804
4D
0.3615 0.3659
0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722
0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578
0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521
4R
0.3512 0.3465
4S
0.3571 0.3907
4T
0.3668 0.3957
4U
0.3590 0.3521
0.3590 0.3521 0.3668 0.3957 0.3771 0.4034 0.3670 0.3578
0.3567 0.3389 0.3641 0.3804 0.3736 0.3874 0.3640 0.3440
0.3495 0.3339 0.3548 0.3736 0.3641 0.3804 0.3567 0.3389
4
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
Region xy Region xy Region xy Region xy
5A1
0.3670 0.3578
5A2
0.3686 0.3649
5A3
0.3744 0.3685
5A4
0.3726 0.3612
0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3744 0.3685
0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3804 0.3721
0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646
5B1
0.3702 0.3722
5B2
0.3719 0.3797
5B3
0.3782 0.3837
5B4
0.3763 0.3760
0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837
0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877
0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798
5C1
0.3825 0.3798
5C2
0.3847 0.3877
5C3
0.3912 0.3917
5C4
0.3887 0.3836
0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917
0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958
0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875
5D1
0.3783 0.3646
5D2
0.3804 0.3721
5D3
0.3863 0.3758
5D4
0.3840 0.3681
0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758
0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794
0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716
6A1
0.3889 0.3690
6A2
0.3915 0.3768
6A3
0.3981 0.3800
6A4
0.3953 0.3720
0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800
0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832
0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751
6B1
0.3941 0.3848
6B2
0.3968 0.3930
6B3
0.4040 0.3966
6B4
0.4010 0.3882
0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966
0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001
0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916
6C1
0.4080 0.3916
6C2
0.4113 0.4001
6C3
0.4186 0.4037
6C4
0.4150 0.3950
0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037
0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073
0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984
6D1
0.4017 0.3751
6D2
0.4048 0.3832
6D3
0.4116 0.3865
6D4
0.4082 0.3782
0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865
0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898
0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814
7A1
0.4147 0.3814
7A2
0.4183 0.3898
7A3
0.4242 0.3919
7A4
0.4203 0.3833
0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919
0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939
0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853
7B1
0.4221 0.3984
7B2
0.4259 0.4073
7B3
0.4322 0.4096
7B4
0.4281 0.4006
0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096
0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119
0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028
5
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
Region xy Region xy Region xy Region xy
7C1
0.4342 0.4028
7C2
0.4385 0.4119
7C3
0.4449 0.4141
7C4
0.4403 0.4049
0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141
0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164
0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071
7D1
0.4259 0.3853
7D2
0.4300 0.3939
7D3
0.4359 0.3960
7D4
0.4316 0.3873
0.4300 0.3939 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960
0.4359 0.3960 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981
0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893
8A1
0.4373 0.3893
8A2
0.4418 0.3981
8A3
0.4475 0.3994
8A4
0.4428 0.3906
0.4418 0.3981 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994
0.4475 0.3994 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008
0.4428 0.3906 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919
8B1
0.4465 0.4071
8B2
0.4513 0.4164
8B3
0.4573 0.4178
8B4
0.4523 0.4085
0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178
0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193
0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099
8C1
0.4582 0.4099
8C2
0.4634 0.4193
8C3
0.4695 0.4207
8C4
0.4641 0.4112
0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207
0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221
0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126
8D1
0.4483 0.3919
8D2
0.4532 0.4008
8D3
0.4589 0.4021
8D4
0.4538 0.3931
0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021
0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034
0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944
AB2
0.5008 0.4256
AB3
0.5069 0.4254
AC2
0.5131 0.4252
AC3
0.5192 0.4250
0.5070 0.4350 0.5133 0.4348 0.5196 0.4346 0.5258 0.4343
0.5133 0.4348 0.5196 0.4346 0.5258 0.4343 0.5321 0.4341
0.5069 0.4254 0.5131 0.4252 0.5192 0.4250 0.5253 0.4248
AB1
0.4946 0.4162
AB4
0.5006 0.4160
AC1
0.5066 0.4158
AC4
0.5126 0.4156
0.5008 0.4256 0.5069 0.4254 0.5131 0.4252 0.5192 0.4250
0.5069 0.4254 0.5131 0.4252 0.5192 0.4250 0.5253 0.4248
0.5006 0.4160 0.5066 0.4158 0.5126 0.4156 0.5186 0.4154
AA2
0.4884 0.4067
AA3
0.4942 0.4066
AD2
0.5001 0.4064
AD3
0.5059 0.4062
0.4946 0.4162 0.5006 0.4160 0.5066 0.4158 0.5126 0.4156
0.5006 0.4160 0.5066 0.4158 0.5126 0.4156 0.5186 0.4154
0.4942 0.4066 0.5001 0.4064 0.5059 0.4062 0.5118 0.4061
AA1
0.4822 0.3973
AA4
0.4879 0.3972
AD1
0.4936 0.3970
AD4
0.4993 0.3969
0.4884 0.4067 0.4942 0.4066 0.5001 0.4064 0.5059 0.4062
0.4942 0.4066 0.5001 0.4064 0.5059 0.4062 0.5118 0.4061
0.4879 0.3972 0.4936 0.3970 0.4993 0.3969 0.5050 0.3967
6
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE
4500K
5000K
5700K
6500K
8000K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
3C
3D
4A
4B
4C
4D
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
3T
3U
4R
4S
4T
4U
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
CCy
CCx
ANSI
C78.377A
2700K
3000K
3500K
4000K
4500K
5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4
7A1
7A2
7A3
7A4
7B1
7B2
7B3
7B4
7C1
7C2
7C3
7C4
7D1
7D2
7D3
7D4
8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
7
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
2700K
3000K
2450K 2200K
7C2
7C3
7C4
7D3
8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
AB2
AB1
AA2
AA1
AB3
AB4
AA3
AA4
AC2
AC1
AD2
AD1
AC3
AC4
AD3
AD4
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.55
CCy
CCx
CREE’S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
5000K
5700K
6500K
8000K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
DT
5000K
5700K
6500K
8000K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
51
8
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
5000K
5700K
6500K
8000K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
50
5000K
5700K
6500K
8000K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
DV
4500K
5000K
5700K
6500K
8000K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
3C
3D
4A
4B
4C
4D
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
3T
3U
4R
4S
4T
4U
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
CCy
CCx
ANSI
C78.377A
DY
DZ
4500K
5000K
5700K
6500K
8000K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
3C
3D
4A
4B
4C
4D
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
3T
3U
4R
4S
4T
4U
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
CCy
CCx
ANSI
C78.377A
5000K
5700K
6500K
8000K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E0
E1
E2
3C
3D
E3
9
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD
CHROMATICITY REGIONS
2700K
3000K
3500K
4000K
4500K
5000K
3A
3B
3C
3D
4A
4B
4C
4D
5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4
7A1
7A2
7A3
7A4
7B1
7B2
7B3
7B4
7C1
7C2
7C3
7C4
7D1
7D2
7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
F4
F6
F7
F5
F8
2700K
3000K
3500K
4000K
4500K
5000K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4
7A1
7A2
7A3
7A4
7B1
7B2
7B3
7B4
7C1
7C2
7C3
7C4
7D1
7D2
7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
3B3B
E4
E5
E6
E8
E7
10
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
2700K
3000K
3500K
4000K
4500K
5000K
3A
3B
3C
3D
4A
4B
4C
4D
5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4
7A1
7A2
7A3
7A4
7B1
7B2
7B3
7B4
7C1
7C2
7C3
7C4
7D1
7D2
7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
Z6
Z7
Z5
Z8
2700K
3000K
2450K
2200K
7C2
7C3
7C4
7D3
8A1
8A2 8A3
8A4
8B1
8B2
8B3
8B4
8C1
8C2
8C3
8C4
8D1
8D2 8D3
8D4
AB2
AB1
AA2
AA1
AB3
AB4
AA3
AA4
AC2
AC1
AD2
AD1
AC3
AC4
AD3
AD4
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.55
CCy
CCx
EA
11
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
CREE’S STANDARD CHROMATICITY KITS
The following table provides the chromaticity bins associated with chromaticity kits for the ML family of LEDs.
Color CCT Kit Chromaticity Bins
Cool
White
7000 K DT 0A, 0B, 0C,0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U
7000 K E0 0A, 0B, 0C, 0D
6500 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6500 K E1 1A, 1B, 1C, 1D
6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6000 K DV 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U
5700 K E2 2A, 2B, 2C, 2D
5500 K DY 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U
5000 K DZ 2C, 2D, 2T, 2U, 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4R, 4S
5000 K A1 3A, 3B, 3C, 3D, 4A, 4B
5000 K E3 3A, 3B, 3C, 3D
4750 K F4 3C, 3D, 4A, 4B
4750 K A2 3C, 3D, 4A. 4B, 4C, 4D
4500 K E4 4A, 4B, 4C, 4D
Warm
White
4300 K A3 4A, 4B, 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
4000 K Z5 5A3, 5B4, 5C1, 5D2
4000 K A4 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
3750 K A5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3500 K Z6 6A3, 6B4, 6C1, 6D2
3500 K A6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3250 K A7 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
3000 K Z7 7A3, 7B4, 7C1, 7D2
3000 K A8 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
2850 K A9 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2700 K Z8 8A3, 8B4, 8C1, 8D2
2700 K AA 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2200 K EA AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4
The following tables of order codes list ux minimums and chromaticity regions for the various categories of XLamp
ML LEDs. Kit numbers completely describe an order code’s chromaticity regions and luminous ux range. For other
ux and chromaticity combinations, contact Cree or an authorized distributor.
12
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
STANDARD ORDER CODES AND BINS (ML-B COOL WHITE, TJ = 25 °C)
XLamp ML-B Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm) @
80 mA*
Order Codes
Kit CCT Code Flux (lm) Typical CRI (75) 80 CRI Minimum
ANSI Cool White (4500 K – 8300 K)
DT
7000 K
J0 23.5
MLBAWT-A1-0000-000WDT
E0 MLBAWT-A1-0000-000WE0
51
6500 K
MLBAWT-A1-0000-000W51
E1 MLBAWT-A1-0000-000WE1
50 6200 K MLBAWT-A1-0000-000W50
DV 6000 K MLBAWT-A1-0000-000WDV
E2 5750 K MLBAWT-A1-0000-000WE2
DY 5500 K MLBAWT-A1-0000-000WDY
DZ
5000 K
MLBAWT-A1-0000-000WDZ
A1 MLBAWT-A1-0000-000WA1
E3 MLBAWT-A1-0000-000WE3
F4
4750K
MLBAWT-A1-0000-000WF4
A2 MLBAWT-A1-0000-000WA2
E4 4500K MLBAWT-A1-0000-000WE4
STANDARD ORDER CODES AND BINS (ML-B WARM WHITE, TJ = 25 °C)
XLamp ML-B Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm)
@ 80 mA*
Order Codes
Kit CCT Code Flux
(lm) Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
ANSI Warm White (2600 K – 4300 K)
A3 4300 K
J0 23.5 MLBAWT-A1-0000-000WA3
H0 18.1 MLBAWT-A1-0000-000VA3
F5 4250 K
J0 23.5 MLBAWT-A1-0000-000WF5
H0 18.1 MLBAWT-A1-0000-000VF5
E5
4000 K
J0 23.5 MLBAWT-A1-0000-000WE5 MLBAWT-H1-0000-000WE5
H0 18.1 MLBAWT-A1-0000-000VE5 MLBAWT-H1-0000-000VE5 MLBAWT-P1-0000-000VE5 MLBAWT-U1-0000-000VE5
Z5
J0 23.5 MLBAWT-A1-0000-000WZ5 MLBAWT-H1-0000-000WZ5
H0 18.1 MLBAWT-A1-0000-000VZ5 MLBAWT-H1-0000-000VZ5 MLBAWT-P1-0000-000VZ5 MLBAWT-U1-0000-000VZ5
A4
J0 23.5 MLBAWT-A1-0000-000WA4
H0 18.1 MLBAWT-A1-0000-000VA4
A5
3750 K
J0 23.5 MLBAWT-A1-0000-000WA5
H0 18.1 MLBAWT-A1-0000-000VA5 MLBAWT-H1-0000-000VA5 MLBAWT-P1-0000-000VA5 MLBAWT-U1-0000-000VA5
G0 13.9 MLBAWT-U1-0000-000UA5
F6
J0 23.5 MLBAWT-A1-0000-000WF6
H0 18.1 MLBAWT-A1-0000-000VF6 MLBAWT-H1-0000-000VF6 MLBAWT-P1-0000-000VF6 MLBAWT-U1-0000-000VF6
G0 13.9 MLBAWT-U1-0000-000UF6
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
13
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
XLamp ML-B Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm)
@ 80 mA*
Order Codes
Kit CCT Code Flux
(lm) Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
E6
3500 K
J0 23.5 MLBAWT-A1-0000-000WE6
H0 18.1 MLBAWT-A1-0000-000VE6 MLBAWT-H1-0000-000VE6 MLBAWT-P1-0000-000VE6 MLBAWT-U1-0000-000VE6
G0 13.9 MLBAWT-U1-0000-000UE6
Z6
J0 23.5 MLBAWT-A1-0000-000WZ6
H0 18.1 MLBAWT-A1-0000-000VZ6 MLBAWT-H1-0000-000VZ6 MLBAWT-P1-0000-000VZ6 MLBAWT-U1-0000-000VZ6
G0 13.9 MLBAWT-U1-0000-000UZ6
A6
J0 23.5 MLBAWT-A1-0000-000WA6
H0 18.1 MLBAWT-A1-0000-000VA6 MLBAWT-H1-0000-000VA6 MLBAWT-P1-0000-000VA6 MLBAWT-U1-0000-000VA6
G0 13.9 MLBAWT-U1-0000-000UA6
A7
3250 K
J0 23.5 MLBAWT-A1-0000-000WA7
H0 18.1 MLBAWT-A1-0000-000VA7 MLBAWT-H1-0000-000VA7 MLBAWT-P1-0000-000VA7 MLBAWT-U1-0000-000VA7
G0 13.9 MLBAWT-P1-0000-000UA7 MLBAWT-U1-0000-000UA7
F7
J0 23.5 MLBAWT-A1-0000-000WF7
H0 18.1 MLBAWT-A1-0000-000VF7 MLBAWT-H1-0000-000VF7 MLBAWT-P1-0000-000VF7 MLBAWT-U1-0000-000VF7
G0 13.9 MLBAWT-P1-0000-000UF7 MLBAWT-U1-0000-000UF7
E7
3000 K
J0 23.5 MLBAWT-A1-0000-000WE7
H0 18.1 MLBAWT-A1-0000-000VE7 MLBAWT-H1-0000-000VE7 MLBAWT-P1-0000-000VE7 MLBAWT-U1-0000-000VE7
G0 13.9 MLBAWT-P1-0000-000UE7 MLBAWT-U1-0000-000UE7
Z7
J0 23.5 MLBAWT-A1-0000-000WZ7
H0 18.1 MLBAWT-A1-0000-000VZ7 MLBAWT-H1-0000-000VZ7 MLBAWT-P1-0000-000VZ7 MLBAWT-U1-0000-000VZ7
G0 13.9 MLBAWT-P1-0000-000UZ7 MLBAWT-U1-0000-000UZ7
A8
J0 23.5 MLBAWT-A1-0000-000WA8
H0 18.1 MLBAWT-A1-0000-000VA8 MLBAWT-H1-0000-000VA8 MLBAWT-P1-0000-000VA8 MLBAWT-U1-0000-000VA8
G0 13.9 MLBAWT-P1-0000-000UA8 MLBAWT-U1-0000-000UA8
A9
2850 K
H0 18.1 MLBAWT-A1-0000-000VA9 MLBAWT-H1-0000-000VA9 MLBAWT-P1-0000-000VA9 MLBAWT-U1-0000-000VA9
G0 13.9 MLBAWT-P1-0000-000UA9 MLBAWT-U1-0000-000UA9
F8
H0 18.1 MLBAWT-A1-0000-000VF8 MLBAWT-H1-0000-000VF8 MLBAWT-P1-0000-000VF8 MLBAWT-U1-0000-000VF8
G0 13.9 MLBAWT-P1-0000-000UF8 MLBAWT-U1-0000-000UF8
E8
2700 K
H0 18.1 MLBAWT-A1-0000-000VE8 MLBAWT-H1-0000-000VE8 MLBAWT-P1-0000-000VE8 MLBAWT-U1-0000-000VE8
G0 13.9 MLBAWT-P1-0000-000UE8 MLBAWT-U1-0000-000UE8
Z8
H0 18.1 MLBAWT-A1-0000-000VZ8 MLBAWT-H1-0000-000VZ8 MLBAWT-P1-0000-000VZ8 MLBAWT-U1-0000-000VZ8
G0 13.9 MLBAWT-P1-0000-000UZ8 MLBAWT-U1-0000-000UZ8
AA
H0 18.1 MLBAWT-A1-0000-000VAA MLBAWT-H1-0000-000VAA MLBAWT-P1-0000-000VAA MLBAWT-U1-0000-000VAA
G0 13.9 MLBAWT-P1-0000-000UAA MLBAWT-U1-0000-000UAA
EA 2200 K
G0 13.9 MLBAWT-A1-0000-000UEA
F0 10.7 MLBAWT-A1-0000-000TEA
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
14
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
STANDARD ORDER CODES AND BINS (ML-C PARALLEL, COOL WHITE, TJ = 25 °C)
XLamp ML-C Parallel, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm) @
100 mA*
Order Codes
Kit CCT Code Flux (lm) Typical CRI (75) 80 CRI Minimum
ANSI Cool White (4500 K – 8300 K)
DT
7000 K
K3 35.2 MLCAWT-A1-0000-0001DT
K2 30.6 MLCAWT-A1-0000-0000DT
J3 26.8 MLCAWT-A1-0000-000XDT
E0
K3 35.2 MLCAWT-A1-0000-0001E0
K2 30.6 MLCAWT-A1-0000-0000E0
J3 26.8 MLCAWT-A1-0000-000XE0
51
6500 K
K3 35.2 MLCAWT-A1-0000-000151
K2 30.6 MLCAWT-A1-0000-000051
J3 26.8 MLCAWT-A1-0000-000X51
E1
K3 35.2 MLCAWT-A1-0000-0001E1
K2 30.6 MLCAWT-A1-0000-0000E1 MLCAWT-H1-0000-0000E1
J3 26.8 MLCAWT-A1-0000-000XE1 MLCAWT-H1-0000-000XE1
50 6200 K
K3 35.2 MLCAWT-A1-0000-000150
K2 30.6 MLCAWT-A1-0000-000050
J3 26.8 MLCAWT-A1-0000-000X50
DV 6000 K
K3 35.2 MLCAWT-A1-0000-0001DV
K2 30.6 MLCAWT-A1-0000-0000DV
J3 26.8 MLCAWT-A1-0000-000XDV
E2 5750 K
K3 35.2 MLCAWT-A1-0000-0001E2
K2 30.6 MLCAWT-A1-0000-0000E2
J3 26.8 MLCAWT-A1-0000-000XE2
DY 5500 K
K3 35.2 MLCAWT-A1-0000-0001DY
K2 30.6 MLCAWT-A1-0000-0000DY
J3 26.8 MLCAWT-A1-0000-000XDY
DZ
5000 K
K3 35.2 MLCAWT-A1-0000-0001DZ
K2 30.6 MLCAWT-A1-0000-0000DZ
J3 26.8 MLCAWT-A1-0000-000XDZ
A1
K3 35.2 MLCAWT-A1-0000-0001A1
K2 30.6 MLCAWT-A1-0000-0000A1
J3 26.8 MLCAWT-A1-0000-000XA1
E3
K3 35.2 MLCAWT-A1-0000-0001E3
K2 30.6 MLCAWT-A1-0000-0000E3 MLCAWT-H1-0000-0000E3
J3 26.8 MLCAWT-A1-0000-000XE3 MLCAWT-H1-0000-000XE3
F4
4750 K
K3 35.2 MLCAWT-A1-0000-0001F4
K2 30.6 MLCAWT-A1-0000-0000F4
J3 26.8 MLCAWT-A1-0000-000XF4
A2
K3 35.2 MLCAWT-A1-0000-0001A2
K2 30.6 MLCAWT-A1-0000-0000A2
J3 26.8 MLCAWT-A1-0000-000XA2
E4 4500 K
K3 35.2 MLCAWT-A1-0000-0001E4
K2 30.6 MLCAWT-A1-0000-0000E4
J3 26.8 MLCAWT-A1-0000-000XE4
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
15
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
STANDARD ORDER CODES AND BINS (ML-C PARALLEL, WARM WHITE, TJ = 25 °C)
XLamp ML-C Parallel, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm)
@ 100 mA*
Order Codes
Kit CCT Code Flux
(lm) Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
ANSI Warm White (2600 K – 4300 K)
A3 4300 K
K2 30.6 MLCAWT-A1-0000-0000A3
J3 26.8 MLCAWT-A1-0000-000XA3
F5 4250 K
K2 30.6 MLCAWT-A1-0000-0000F5
J3 26.8 MLCAWT-A1-0000-000XF5
E5
4000 K
K2 30.6 MLCAWT-A1-0000-0000E5 MLCAWT-H1-0000-0000E5
J3 26.8 MLCAWT-A1-0000-000XE5 MLCAWT-H1-0000-000XE5 MLCAWT-P1-0000-000XE5
J2 23.5 MLCAWT-H1-0000-000WE5 MLCAWT-P1-0000-000WE5 MLCAWT-U1-0000-000WE5
H0 18.1 MLCAWT-U1-0000-000VE5
Z5
K2 30.6 MLCAWT-A1-0000-0000Z5 MLCAWT-H1-0000-0000Z5
J3 26.8 MLCAWT-A1-0000-000XZ5 MLCAWT-H1-0000-000XZ5 MLCAWT-P1-0000-000XZ5
J2 23.5 MLCAWT-H1-0000-000WZ5 MLCAWT-P1-0000-000WZ5 MLCAWT-U1-0000-000WZ5
H0 18.1 MLCAWT-U1-0000-000VZ5
A4
K2 30.6 MLCAWT-A1-0000-0000A4
J3 26.8 MLCAWT-A1-0000-000XA4
A5
3750 K
K2 30.6 MLCAWT-A1-0000-0000A5 MLCAWT-H1-0000-0000A5
J3 26.8 MLCAWT-A1-0000-000XA5 MLCAWT-H1-0000-000XA5 MLCAWT-P1-0000-000XA5
J2 23.5 MLCAWT-H1-0000-000WA5 MLCAWT-P1-0000-000WA5 MLCAWT-U1-0000-000WA5
H0 18.1 MLCAWT-P1-0000-000VA5 MLCAWT-U1-0000-000VA5
F6
K2 30.6 MLCAWT-A1-0000-0000F6 MLCAWT-H1-0000-0000F6
J3 26.8 MLCAWT-A1-0000-000XF6 MLCAWT-H1-0000-000XF6 MLCAWT-P1-0000-000XF6
J2 23.5 MLCAWT-H1-0000-000WF6 MLCAWT-P1-0000-000WF6 MLCAWT-U1-0000-000WF6
H0 18.1 MLCAWT-P1-0000-000VF6 MLCAWT-U1-0000-000VF6
E6
3500 K
K2 30.6 MLCAWT-A1-0000-0000E6 MLCAWT-H1-0000-0000E6
J3 26.8 MLCAWT-A1-0000-000XE6 MLCAWT-H1-0000-000XE6 MLCAWT-P1-0000-000XE6
J2 23.5 MLCAWT-H1-0000-000WE6 MLCAWT-P1-0000-000WE6 MLCAWT-U1-0000-000WE6
H0 18.1 MLCAWT-P1-0000-000VE6 MLCAWT-U1-0000-000VE6
Z6
K2 30.6 MLCAWT-A1-0000-0000Z6 MLCAWT-H1-0000-0000Z6
J3 26.8 MLCAWT-A1-0000-000XZ6 MLCAWT-H1-0000-000XZ6 MLCAWT-P1-0000-000XZ6
J2 23.5 MLCAWT-H1-0000-000WZ6 MLCAWT-P1-0000-000WZ6 MLCAWT-U1-0000-000WZ6
H0 18.1 MLCAWT-P1-0000-000VZ6 MLCAWT-U1-0000-000VZ6
A6
K2 30.6 MLCAWT-A1-0000-0000A6 MLCAWT-H1-0000-0000A6
J3 26.8 MLCAWT-A1-0000-000XA6 MLCAWT-H1-0000-000XA6 MLCAWT-P1-0000-000XA6
J2 23.5 MLCAWT-H1-0000-000WA6 MLCAWT-P1-0000-000WA6 MLCAWT-U1-0000-000WA6
H0 18.1 MLCAWT-P1-0000-000VA6 MLCAWT-U1-0000-000VA6
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
16
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
XLamp ML-C Parallel, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm)
@ 100 mA*
Order Codes
Kit CCT Code Flux
(lm) Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
A7
3250 K
K2 30.6 MLCAWT-A1-0000-0000A7 MLCAWT-H1-0000-0000A7
J3 26.8 MLCAWT-A1-0000-000XA7 MLCAWT-H1-0000-000XA7
J2 23.5 MLCAWT-A1-0000-000WA7 MLCAWT-H1-0000-000WA7 MLCAWT-P1-0000-000WA7 MLCAWT-U1-0000-000WA7
H0 18.1 MLCAWT-H1-0000-000VA7 MLCAWT-P1-0000-000VA7 MLCAWT-U1-0000-000VA7
F7
K2 30.6 MLCAWT-A1-0000-0000F7 MLCAWT-H1-0000-0000F7
J3 26.8 MLCAWT-A1-0000-000XF7 MLCAWT-H1-0000-000XF7
J2 23.5 MLCAWT-A1-0000-000WF7 MLCAWT-H1-0000-000WF7 MLCAWT-P1-0000-000WF7 MLCAWT-U1-0000-000WF7
H0 18.1 MLCAWT-H1-0000-000VF7 MLCAWT-P1-0000-000VF7 MLCAWT-U1-0000-000VF7
E7
3000 K
K2 30.6 MLCAWT-A1-0000-0000E7 MLCAWT-H1-0000-0000E7
J3 26.8 MLCAWT-A1-0000-000XE7 MLCAWT-H1-0000-000XE7
J2 23.5 MLCAWT-A1-0000-000WE7 MLCAWT-H1-0000-000WE7 MLCAWT-P1-0000-000WE7 MLCAWT-U1-0000-000WE7
H0 18.1 MLCAWT-H1-0000-000VE7 MLCAWT-P1-0000-000VE7 MLCAWT-U1-0000-000VE7
Z7
K2 30.6 MLCAWT-A1-0000-0000Z7 MLCAWT-H1-0000-0000Z7
J3 26.8 MLCAWT-A1-0000-000XZ7 MLCAWT-H1-0000-000XZ7
J2 23.5 MLCAWT-A1-0000-000WZ7 MLCAWT-H1-0000-000WZ7 MLCAWT-P1-0000-000WZ7 MLCAWT-U1-0000-000WZ7
H0 18.1 MLCAWT-H1-0000-000VZ7 MLCAWT-P1-0000-000VZ7 MLCAWT-U1-0000-000VZ7
A8
K2 30.6 MLCAWT-A1-0000-0000A8 MLCAWT-H1-0000-0000A8
J3 26.8 MLCAWT-A1-0000-000XA8 MLCAWT-H1-0000-000XA8
J2 23.5 MLCAWT-A1-0000-000WA8 MLCAWT-H1-0000-000WA8 MLCAWT-P1-0000-000WA8 MLCAWT-U1-0000-000WA8
H0 18.1 MLCAWT-H1-0000-000VA8 MLCAWT-P1-0000-000VA8 MLCAWT-U1-0000-000VA8
A9
2850 K
J3 26.8 MLCAWT-A1-0000-000XA9 MLCAWT-H1-0000-000XA9
J2 23.5 MLCAWT-A1-0000-000WA9 MLCAWT-H1-0000-000WA9 MLCAWT-P1-0000-000WA9 MLCAWT-U1-0000-000WA9
H0 18.1 MLCAWT-H1-0000-000VA9 MLCAWT-P1-0000-000VA9 MLCAWT-U1-0000-000VA9
F8
J3 26.8 MLCAWT-A1-0000-000XF8 MLCAWT-H1-0000-000XF8
J2 23.5 MLCAWT-A1-0000-000WF8 MLCAWT-H1-0000-000WF8 MLCAWT-P1-0000-000WF8 MLCAWT-U1-0000-000WF8
H0 18.1 MLCAWT-H1-0000-000VF8 MLCAWT-P1-0000-000VF8 MLCAWT-U1-0000-000VF8
E8
2700 K
J3 26.8 MLCAWT-A1-0000-000XE8 MLCAWT-H1-0000-000XE8
J2 23.5 MLCAWT-A1-0000-000WE8 MLCAWT-H1-0000-000WE8 MLCAWT-P1-0000-000WE8 MLCAWT-U1-0000-000WE8
H0 18.1 MLCAWT-H1-0000-000VE8 MLCAWT-P1-0000-000VE8 MLCAWT-U1-0000-000VE8
Z8
J3 26.8 MLCAWT-A1-0000-000XZ8 MLCAWT-H1-0000-000XZ8
J2 23.5 MLCAWT-A1-0000-000WZ8 MLCAWT-H1-0000-000WZ8 MLCAWT-P1-0000-000WZ8 MLCAWT-U1-0000-000WZ8
H0 18.1 MLCAWT-H1-0000-000VZ8 MLCAWT-P1-0000-000VZ8 MLCAWT-U1-0000-000VZ8
AA
J3 26.8 MLCAWT-A1-0000-000XAA MLCAWT-H1-0000-000XAA
J2 23.5 MLCAWT-A1-0000-000WAA MLCAWT-H1-0000-000WAA MLCAWT-P1-0000-000WAA MLCAWT-U1-0000-000WAA
H0 18.1 MLCAWT-H1-0000-000VAA MLCAWT-P1-0000-000VAA MLCAWT-U1-0000-000VAA
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
17
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
STANDARD ORDER CODES AND BINS (ML-E PARALLEL, COOL WHITE, TJ = 25 °C)
XLamp ML-E Parallel, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm) @
150 mA*
Order Codes
Kit CCT Code Flux (lm) Typical CRI (75) 80 CRI Minimum
ANSI Cool White (4500 K – 8300 K)
DT
7000 K
N3 56.8 MLEAWT-A1-0000-0005DT
N2 51.7 MLEAWT-A1-0000-0004DT
M3 45.7 MLEAWT-A1-0000-0003DT
E0
N3 56.8 MLEAWT-A1-0000-0005E0
N2 51.7 MLEAWT-A1-0000-0004E0
M3 45.7 MLEAWT-A1-0000-0003E0
51
6500 K
N3 56.8 MLEAWT-A1-0000-000551
N2 51.7 MLEAWT-A1-0000-000451
M3 45.7 MLEAWT-A1-0000-000351
E1
N3 56.8 MLEAWT-A1-0000-0005E1
N2 51.7 MLEAWT-A1-0000-0004E1
M3 45.7 MLEAWT-A1-0000-0003E1
50 6200 K
N3 56.8 MLEAWT-A1-0000-000550
N2 51.7 MLEAWT-A1-0000-000450
M3 45.7 MLEAWT-A1-0000-000350
DV 6000 K
N3 56.8 MLEAWT-A1-0000-0005DV
N2 51.7 MLEAWT-A1-0000-0004DV
M3 45.7 MLEAWT-A1-0000-0003DV
E2 5750 K
N3 56.8 MLEAWT-A1-0000-0005E2
N2 51.7 MLEAWT-A1-0000-0004E2
M3 45.7 MLEAWT-A1-0000-0003E2
DY 5500 K
N3 56.8 MLEAWT-A1-0000-0005DY
N2 51.7 MLEAWT-A1-0000-0004DY
M3 45.7 MLEAWT-A1-0000-0003DY
DZ
5000 K
N3 56.8 MLEAWT-A1-0000-0005DZ
N2 51.7 MLEAWT-A1-0000-0004DZ
M3 45.7 MLEAWT-A1-0000-0003DZ
A1
N2 51.7 MLEAWT-A1-0000-0004A1
M3 45.7 MLEAWT-A1-0000-0003A1
M2 39.8 MLEAWT-A1-0000-0002A1
E3
N3 56.8 MLEAWT-A1-0000-0005E3
N2 51.7 MLEAWT-A1-0000-0004E3 MLEAWT-H1-0000-0004E3
M3 45.7 MLEAWT-A1-0000-0003E3 MLEAWT-H1-0000-0003E3
M2 39.8 MLEAWT-A1-0000-0002E3 MLEAWT-H1-0000-0002E3
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
18
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
XLamp ML-E Parallel, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm) @
150 mA*
Order Codes
Kit CCT Code Flux (lm) Typical CRI (75) 80 CRI Minimum
F4
4750 K
N2 51.7 MLEAWT-A1-0000-0004F4
M3 45.7 MLEAWT-A1-0000-0003F4
M2 39.8 MLEAWT-A1-0000-0002F4
A2
N2 51.7 MLEAWT-A1-0000-0004A2
M3 45.7 MLEAWT-A1-0000-0003A2
M2 39.8 MLEAWT-A1-0000-0002A2
E4 4500 K
N2 51.7 MLEAWT-A1-0000-0004E4
M3 45.7 MLEAWT-A1-0000-0003E4
M2 39.8 MLEAWT-A1-0000-0002E4
STANDARD ORDER CODES AND BINS (ML-E PARALLEL, WARM WHITE, TJ = 25 °C)
XLamp ML-E Parallel, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm)
@ 150 mA*
Order Codes
Kit CCT Code Flux
(lm) Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
ANSI Warm White (2600 K – 4300 K)
A3 4300 K
N2 51.7 MLEAWT-A1-0000-0004A3
M3 45.7 MLEAWT-A1-0000-0003A3
M2 39.8 MLEAWT-A1-0000-0002A3
F5 4250 K
N2 51.7 MLEAWT-A1-0000-0004F5
M3 45.7 MLEAWT-A1-0000-0003F5
M2 39.8 MLEAWT-A1-0000-0002F5
E5
4000 K
N2 51.7 MLEAWT-A1-0000-0004E5
M3 45.7 MLEAWT-A1-0000-0003E5 MLEAWT-H1-0000-0003E5 MLEAWT-P1-0000-0003E5
M2 39.8 MLEAWT-A1-0000-0002E5 MLEAWT-H1-0000-0002E5 MLEAWT-P1-0000-0002E5 MLEAWT-U1-0000-0002E5
K3 35.2 MLEAWT-H1-0000-0001E5 MLEAWT-P1-0000-0001E5 MLEAWT-U1-0000-0001E5
Z5
N2 51.7 MLEAWT-A1-0000-0004Z5
M3 45.7 MLEAWT-A1-0000-0003Z5 MLEAWT-H1-0000-0003Z5 MLEAWT-P1-0000-0003Z5
M2 39.8 MLEAWT-A1-0000-0002Z5 MLEAWT-H1-0000-0002Z5 MLEAWT-P1-0000-0002Z5 MLEAWT-U1-0000-0002Z5
K3 35.2 MLEAWT-H1-0000-0001Z5 MLEAWT-P1-0000-0001Z5 MLEAWT-U1-0000-0001Z5
A4
N2 51.7 MLEAWT-A1-0000-0004A4
M3 45.7 MLEAWT-A1-0000-0003A4
M2 39.8 MLEAWT-A1-0000-0002A4
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
19
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
XLamp ML-E Parallel, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm)
@ 150 mA*
Order Codes
Kit CCT Code Flux
(lm) Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
A5
3750 K
M3 45.7 MLEAWT-A1-0000-0003A5
M2 39.8 MLEAWT-A1-0000-0002A5 MLEAWT-H1-0000-0002A5 MLEAWT-P1-0000-0002A5 MLEAWT-U1-0000-0002A5
K3 35.2 MLEAWT-H1-0000-0001A5 MLEAWT-P1-0000-0001A5 MLEAWT-U1-0000-0001A5
F6
M3 45.7 MLEAWT-A1-0000-0003F6
M2 39.8 MLEAWT-A1-0000-0002F6 MLEAWT-H1-0000-0002F6 MLEAWT-P1-0000-0002F6 MLEAWT-U1-0000-0002F6
K3 35.2 MLEAWT-H1-0000-0001F6 MLEAWT-P1-0000-0001F6 MLEAWT-U1-0000-0001F6
E6
3500 K
M3 45.7 MLEAWT-A1-0000-0003E6
M2 39.8 MLEAWT-A1-0000-0002E6 MLEAWT-H1-0000-0002E6 MLEAWT-P1-0000-0002E6 MLEAWT-U1-0000-0002E6
K3 35.2 MLEAWT-H1-0000-0001E6 MLEAWT-P1-0000-0001E6 MLEAWT-U1-0000-0001E6
Z6
M3 45.7 MLEAWT-A1-0000-0003Z6
M2 39.8 MLEAWT-A1-0000-0002Z6 MLEAWT-H1-0000-0002Z6 MLEAWT-P1-0000-0002Z6 MLEAWT-U1-0000-0002Z6
K3 35.2 MLEAWT-H1-0000-0001Z6 MLEAWT-P1-0000-0001Z6 MLEAWT-U1-0000-0001Z6
A6
M3 45.7 MLEAWT-A1-0000-0003A6
M2 39.8 MLEAWT-A1-0000-0002A6 MLEAWT-H1-0000-0002A6 MLEAWT-P1-0000-0002A6 MLEAWT-U1-0000-0002A6
K3 35.2 MLEAWT-H1-0000-0001A6 MLEAWT-P1-0000-0001A6 MLEAWT-U1-0000-0001A6
A7
3250 K
M3 45.7 MLEAWT-A1-0000-0003A7
M2 39.8 MLEAWT-A1-0000-0002A7 MLEAWT-H1-0000-0002A7 MLEAWT-P1-0000-0002A7 MLEAWT-U1-0000-0002A7
K3 35.2 MLEAWT-A1-0000-0001A7 MLEAWT-H1-0000-0001A7 MLEAWT-P1-0000-0001A7 MLEAWT-U1-0000-0001A7
K2 30.6 MLEAWT-H1-0000-0000A7 MLEAWT-P1-0000-0000A7 MLEAWT-U1-0000-0000A7
F7
M3 45.7 MLEAWT-A1-0000-0003F7
M2 39.8 MLEAWT-A1-0000-0002F7 MLEAWT-H1-0000-0002F7 MLEAWT-P1-0000-0002F7 MLEAWT-U1-0000-0002F7
K3 35.2 MLEAWT-A1-0000-0001F7 MLEAWT-H1-0000-0001F7 MLEAWT-P1-0000-0001F7 MLEAWT-U1-0000-0001F7
K2 30.6 MLEAWT-H1-0000-0000F7 MLEAWT-P1-0000-0000F7 MLEAWT-U1-0000-0000F7
E7
3000 K
M3 45.7 MLEAWT-A1-0000-0003E7
M2 39.8 MLEAWT-A1-0000-0002E7 MLEAWT-H1-0000-0002E7 MLEAWT-P1-0000-0002E7 MLEAWT-U1-0000-0002E7
K3 35.2 MLEAWT-A1-0000-0001E7 MLEAWT-H1-0000-0001E7 MLEAWT-P1-0000-0001E7 MLEAWT-U1-0000-0001E7
K2 30.6 MLEAWT-H1-0000-0000E7 MLEAWT-P1-0000-0000E7 MLEAWT-U1-0000-0000E7
Z7
M3 45.7 MLEAWT-A1-0000-0003Z7
M2 39.8 MLEAWT-A1-0000-0002Z7 MLEAWT-H1-0000-0002Z7 MLEAWT-P1-0000-0002Z7 MLEAWT-U1-0000-0002Z7
K3 35.2 MLEAWT-A1-0000-0001Z7 MLEAWT-H1-0000-0001Z7 MLEAWT-P1-0000-0001Z7 MLEAWT-U1-0000-0001Z7
K2 30.6 MLEAWT-H1-0000-0000Z7 MLEAWT-P1-0000-0000Z7 MLEAWT-U1-0000-0000Z7
A8
M3 45.7 MLEAWT-A1-0000-0003A8
M2 39.8 MLEAWT-A1-0000-0002A8 MLEAWT-H1-0000-0002A8 MLEAWT-P1-0000-0002A8 MLEAWT-U1-0000-0002A8
K3 35.2 MLEAWT-A1-0000-0001A8 MLEAWT-H1-0000-0001A8 MLEAWT-P1-0000-0001A8 MLEAWT-U1-0000-0001A8
K2 30.6 MLEAWT-H1-0000-0000A8 MLEAWT-P1-0000-0000A8 MLEAWT-U1-0000-0000A8
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
20
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
XLamp ML-E Parallel, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm)
@ 150 mA*
Order Codes
Kit CCT Code Flux
(lm) Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
A9
2850 K
M2 39.8 MLEAWT-A1-0000-0002A9
K3 35.2 MLEAWT-A1-0000-0001A9 MLEAWT-H1-0000-0001A9 MLEAWT-P1-0000-0001A9 MLEAWT-U1-0000-0001A9
K2 30.6 MLEAWT-H1-0000-0000A9 MLEAWT-P1-0000-0000A9 MLEAWT-U1-0000-0000A9
F8
M2 39.8 MLEAWT-A1-0000-0002F8
K3 35.2 MLEAWT-A1-0000-0001F8 MLEAWT-H1-0000-0001F8 MLEAWT-P1-0000-0001F8 MLEAWT-U1-0000-0001F8
K2 30.6 MLEAWT-H1-0000-0000F8 MLEAWT-P1-0000-0000F8 MLEAWT-U1-0000-0000F8
E8
2700 K
M2 39.8 MLEAWT-A1-0000-0002E8
K3 35.2 MLEAWT-A1-0000-0001E8 MLEAWT-H1-0000-0001E8 MLEAWT-P1-0000-0001E8 MLEAWT-U1-0000-0001E8
K2 30.6 MLEAWT-H1-0000-0000E8 MLEAWT-P1-0000-0000E8 MLEAWT-U1-0000-0000E8
Z8
M2 39.8 MLEAWT-A1-0000-0002Z8
K3 35.2 MLEAWT-A1-0000-0001Z8 MLEAWT-H1-0000-0001Z8 MLEAWT-P1-0000-0001Z8 MLEAWT-U1-0000-0001Z8
K2 30.6 MLEAWT-H1-0000-0000Z8 MLEAWT-P1-0000-0000Z8 MLEAWT-U1-0000-0000Z8
AA
M2 39.8 MLEAWT-A1-0000-0002AA
K3 35.2 MLEAWT-A1-0000-0001AA MLEAWT-H1-0000-0001AA MLEAWT-P1-0000-0001AA MLEAWT-U1-0000-0001AA
K2 30.6 MLEAWT-H1-0000-0000AA MLEAWT-P1-0000-0000AA MLEAWT-U1-0000-0000AA
STANDARD ORDER CODES AND BINS (ML-C SERIES, COOL WHITE, TJ = 25 °C)
XLamp ML-C Series, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm) @
50 mA*
Order Codes
Kit CCT Code Flux (lm) Typical CRI (75) 80 CRI Minimum
ANSI Cool White (4500 K – 8300 K)
DT
7000 K
K3 35.2 MLCSWT-A1-0000-0001DT
K2 30.6 MLCSWT-A1-0000-0000DT
J3 26.8 MLCSWT-A1-0000-000XDT
E0
K3 35.2 MLCSWT-A1-0000-0001E0
K2 30.6 MLCSWT-A1-0000-0000E0
J3 26.8 MLCSWT-A1-0000-000XE0
51
6500 K
K3 35.2 MLCSWT-A1-0000-000151
K2 30.6 MLCSWT-A1-0000-000051
J3 26.8 MLCSWT-A1-0000-000X51
E1
K3 35.2 MLCSWT-A1-0000-0001E1
K2 30.6 MLCSWT-A1-0000-0000E1 MLCSWT-H1-0000-0000E1
J3 26.8 MLCSWT-A1-0000-000XE1 MLCSWT-H1-0000-000XE1
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
21
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
XLamp ML-C Series, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm) @
50 mA*
Order Codes
Kit CCT Code Flux (lm) Typical CRI (75) 80 CRI Minimum
50 6200 K
K3 35.2 MLCSWT-A1-0000-000150
K2 30.6 MLCSWT-A1-0000-000050
J3 26.8 MLCSWT-A1-0000-000X50
DV 6000 K
K3 35.2 MLCSWT-A1-0000-0001DV
K2 30.6 MLCSWT-A1-0000-0000DV
J3 26.8 MLCSWT-A1-0000-000XDV
E2 5750 K
K3 35.2 MLCSWT-A1-0000-0001E2
K2 30.6 MLCSWT-A1-0000-0000E2
J3 26.8 MLCSWT-A1-0000-000XE2
DY 5500 K
K3 35.2 MLCSWT-A1-0000-0001DY
K2 30.6 MLCSWT-A1-0000-0000DY
J3 26.8 MLCSWT-A1-0000-000XDY
DZ
5000 K
K3 35.2 MLCSWT-A1-0000-0001DZ
K2 30.6 MLCSWT-A1-0000-0000DZ
J3 26.8 MLCSWT-A1-0000-000XDZ
A1
K3 35.2 MLCSWT-A1-0000-0001A1
K2 30.6 MLCSWT-A1-0000-0000A1
J3 26.8 MLCSWT-A1-0000-000XA1
E3
K3 35.2 MLCSWT-A1-0000-0001E3
K2 30.6 MLCSWT-A1-0000-0000E3 MLCSWT-H1-0000-0000E3
J3 26.8 MLCSWT-A1-0000-000XE3 MLCSWT-H1-0000-000XE3
F4
4750 K
K3 35.2 MLCSWT-A1-0000-0001F4
K2 30.6 MLCSWT-A1-0000-0000F4
J3 26.8 MLCSWT-A1-0000-000XF4
A2
K3 35.2 MLCSWT-A1-0000-0001A2
K2 30.6 MLCSWT-A1-0000-0000A2
J3 26.8 MLCSWT-A1-0000-000XA2
E4 4500 K
K3 35.2 MLCSWT-A1-0000-0001E4
K2 30.6 MLCSWT-A1-0000-0000E4
J3 26.8 MLCSWT-A1-0000-000XE4
22
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
STANDARD ORDER CODES AND BINS (ML-C SERIES, WARM WHITE, TJ = 25 °C)
XLamp ML-C Series, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm)
@ 50 mA*
Order Codes
Kit CCT Code Flux
(lm) Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
ANSI Warm White (2600 K – 4300 K)
A3 4300 K
K2 30.6 MLCSWT-A1-0000-0000A3
J3 26.8 MLCSWT-A1-0000-000XA3
F5 4250 K
K2 30.6 MLCSWT-A1-0000-0000F5
J3 26.8 MLCSWT-A1-0000-000XF5
E5
4000 K
K2 30.6 MLCSWT-A1-0000-0000E5 MLCSWT-H1-0000-0000E5
J3 26.8 MLCSWT-A1-0000-000XE5 MLCSWT-H1-0000-000XE5 MLCSWT-P1-0000-000XE5
J2 23.5 MLCSWT-H1-0000-000WE5 MLCSWT-P1-0000-000WE5 MLCSWT-U1-0000-000WE5
H0 18.1 MLCSWT-U1-0000-000VE5
Z5
K2 30.6 MLCSWT-A1-0000-0000Z5 MLCSWT-H1-0000-0000Z5
J3 26.8 MLCSWT-A1-0000-000XZ5 MLCSWT-H1-0000-000XZ5 MLCSWT-P1-0000-000XZ5
J2 23.5 MLCSWT-H1-0000-000WZ5 MLCSWT-P1-0000-000WZ5 MLCSWT-U1-0000-000WZ5
H0 18.1 MLCSWT-U1-0000-000VZ5
A4
K2 30.6 MLCSWT-A1-0000-0000A4
J3 26.8 MLCSWT-A1-0000-000XA4
A5
3750 K
K2 30.6 MLCSWT-A1-0000-0000A5 MLCSWT-H1-0000-0000A5
J3 26.8 MLCSWT-A1-0000-000XA5 MLCSWT-H1-0000-000XA5 MLCSWT-P1-0000-000XA5
J2 23.5 MLCSWT-H1-0000-000WA5 MLCSWT-P1-0000-000WA5 MLCSWT-U1-0000-000WA5
H0 18.1 MLCSWT-P1-0000-000VA5 MLCSWT-U1-0000-000VA5
F6
K2 30.6 MLCSWT-A1-0000-0000F6 MLCSWT-H1-0000-0000F6
J3 26.8 MLCSWT-A1-0000-000XF6 MLCSWT-H1-0000-000XF6 MLCSWT-P1-0000-000XF6
J2 23.5 MLCSWT-H1-0000-000WF6 MLCSWT-P1-0000-000WF6 MLCSWT-U1-0000-000WF6
H0 18.1 MLCSWT-P1-0000-000VF6 MLCSWT-U1-0000-000VF6
E6
3500 K
K2 30.6 MLCSWT-A1-0000-0000E6 MLCSWT-H1-0000-0000E6
J3 26.8 MLCSWT-A1-0000-000XE6 MLCSWT-H1-0000-000XE6 MLCSWT-P1-0000-000XE6
J2 23.5 MLCSWT-H1-0000-000WE6 MLCSWT-P1-0000-000WE6 MLCSWT-U1-0000-000WE6
H0 18.1 MLCSWT-P1-0000-000VE6 MLCSWT-U1-0000-000VE6
Z6
K2 30.6 MLCSWT-A1-0000-0000Z6 MLCSWT-H1-0000-0000Z6
J3 26.8 MLCSWT-A1-0000-000XZ6 MLCSWT-H1-0000-000XZ6 MLCSWT-P1-0000-000XZ6
J2 23.5 MLCSWT-H1-0000-000WZ6 MLCSWT-P1-0000-000WZ6 MLCSWT-U1-0000-000WZ6
H0 18.1 MLCSWT-P1-0000-000VZ6 MLCSWT-U1-0000-000VZ6
A6
K2 30.6 MLCSWT-A1-0000-0000A6 MLCSWT-H1-0000-0000A6
J3 26.8 MLCSWT-A1-0000-000XA6 MLCSWT-H1-0000-000XA6 MLCSWT-P1-0000-000XA6
J2 23.5 MLCSWT-H1-0000-000WA6 MLCSWT-P1-0000-000WA6 MLCSWT-U1-0000-000WA6
H0 18.1 MLCSWT-P1-0000-000VA6 MLCSWT-U1-0000-000VA6
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
23
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
XLamp ML-C Series, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm)
@ 50 mA*
Order Codes
Kit CCT Code Flux
(lm) Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
A7
3250 K
K2 30.6 MLCSWT-A1-0000-0000A7 MLCSWT-H1-0000-0000A7
J3 26.8 MLCSWT-A1-0000-000XA7 MLCSWT-H1-0000-000XA7
J2 23.5 MLCSWT-A1-0000-000WA7 MLCSWT-H1-0000-000WA7 MLCSWT-P1-0000-000WA7 MLCSWT-U1-0000-000WA7
H0 18.1 MLCSWT-H1-0000-000VA7 MLCSWT-P1-0000-000VA7 MLCSWT-U1-0000-000VA7
F7
K2 30.6 MLCSWT-A1-0000-0000F7 MLCSWT-H1-0000-0000F7
J3 26.8 MLCSWT-A1-0000-000XF7 MLCSWT-H1-0000-000XF7
J2 23.5 MLCSWT-A1-0000-000WF7 MLCSWT-H1-0000-000WF7 MLCSWT-P1-0000-000WF7 MLCSWT-U1-0000-000WF7
H0 18.1 MLCSWT-H1-0000-000VF7 MLCSWT-P1-0000-000VF7 MLCSWT-U1-0000-000VF7
E7
3000 K
K2 30.6 MLCSWT-A1-0000-0000E7 MLCSWT-H1-0000-0000E7
J3 26.8 MLCSWT-A1-0000-000XE7 MLCSWT-H1-0000-000XE7
J2 23.5 MLCSWT-A1-0000-000WE7 MLCSWT-H1-0000-000WE7 MLCSWT-P1-0000-000WE7 MLCSWT-U1-0000-000WE7
H0 18.1 MLCSWT-H1-0000-000VE7 MLCSWT-P1-0000-000VE7 MLCSWT-U1-0000-000VE7
Z7
K2 30.6 MLCSWT-A1-0000-0000Z7 MLCSWT-H1-0000-0000Z7
J3 26.8 MLCSWT-A1-0000-000XZ7 MLCSWT-H1-0000-000XZ7
J2 23.5 MLCSWT-A1-0000-000WZ7 MLCSWT-H1-0000-000WZ7 MLCSWT-P1-0000-000WZ7 MLCSWT-U1-0000-000WZ7
H0 18.1 MLCSWT-H1-0000-000VZ7 MLCSWT-P1-0000-000VZ7 MLCSWT-U1-0000-000VZ7
A8
K2 30.6 MLCSWT-A1-0000-0000A8 MLCSWT-H1-0000-0000A8
J3 26.8 MLCSWT-A1-0000-000XA8 MLCSWT-H1-0000-000XA8
J2 23.5 MLCSWT-A1-0000-000WA8 MLCSWT-H1-0000-000WA8 MLCSWT-P1-0000-000WA8 MLCSWT-U1-0000-000WA8
H0 18.1 MLCSWT-H1-0000-000VA8 MLCSWT-P1-0000-000VA8 MLCSWT-U1-0000-000VA8
A9
2850 K
J3 26.8 MLCSWT-A1-0000-000XA9 MLCSWT-H1-0000-000XA9
J2 23.5 MLCSWT-A1-0000-000WA9 MLCSWT-H1-0000-000WA9 MLCSWT-P1-0000-000WA9 MLCSWT-U1-0000-000WA9
H0 18.1 MLCSWT-H1-0000-000VA9 MLCSWT-P1-0000-000VA9 MLCSWT-U1-0000-000VA9
F8
J3 26.8 MLCSWT-A1-0000-000XF8 MLCSWT-H1-0000-000XF8
J2 23.5 MLCSWT-A1-0000-000WF8 MLCSWT-H1-0000-000WF8 MLCSWT-P1-0000-000WF8 MLCSWT-U1-0000-000WF8
H0 18.1 MLCSWT-H1-0000-000VF8 MLCSWT-P1-0000-000VF8 MLCSWT-U1-0000-000VF8
E8
2700 K
J3 26.8 MLCSWT-A1-0000-000XE8 MLCSWT-H1-0000-000XE8
J2 23.5 MLCSWT-A1-0000-000WE8 MLCSWT-H1-0000-000WE8 MLCSWT-P1-0000-000WE8 MLCSWT-U1-0000-000WE8
H0 18.1 MLCSWT-H1-0000-000VE8 MLCSWT-P1-0000-000VE8 MLCSWT-U1-0000-000VE8
Z8
J3 26.8 MLCSWT-A1-0000-000XZ8 MLCSWT-H1-0000-000XZ8
J2 23.5 MLCSWT-A1-0000-000WZ8 MLCSWT-H1-0000-000WZ8 MLCSWT-P1-0000-000WZ8 MLCSWT-U1-0000-000WZ8
H0 18.1 MLCSWT-H1-0000-000VZ8 MLCSWT-P1-0000-000VZ8 MLCSWT-U1-0000-000VZ8
AA
J3 26.8 MLCSWT-A1-0000-000XAA MLCSWT-H1-0000-000XAA
J2 23.5 MLCSWT-A1-0000-000WAA MLCSWT-H1-0000-000WAA MLCSWT-P1-0000-000WAA MLCSWT-U1-0000-000WAA
H0 18.1 MLCSWT-H1-0000-000VAA MLCSWT-P1-0000-000VAA MLCSWT-U1-0000-000VAA
24
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
STANDARD ORDER CODES AND BINS (ML-E SERIES, COOL WHITE, TJ = 25 °C)
XLamp ML-E Series, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm) @
50 mA*
Order Codes
Kit CCT Code Flux (lm) Typical CRI (75) 80 CRI Minimum
ANSI Cool White (4500 K – 8300 K)
DT
7000 K
N3 56.8 MLESWT-A1-0000-0005DT
N2 51.7 MLESWT-A1-0000-0004DT
M3 45.7 MLESWT-A1-0000-0003DT
E0
N3 56.8 MLESWT-A1-0000-0005E0
N2 51.7 MLESWT-A1-0000-0004E0
M3 45.7 MLESWT-A1-0000-0003E0
51
6500 K
N3 56.8 MLESWT-A1-0000-000551
N2 51.7 MLESWT-A1-0000-000451
M3 45.7 MLESWT-A1-0000-000351
E1
N3 56.8 MLESWT-A1-0000-0005E1
N2 51.7 MLESWT-A1-0000-0004E1
M3 45.7 MLESWT-A1-0000-0003E1
50 6200 K
N3 56.8 MLESWT-A1-0000-000550
N2 51.7 MLESWT-A1-0000-000450
M3 45.7 MLESWT-A1-0000-000350
DV 6000 K
N3 56.8 MLESWT-A1-0000-0005DV
N2 51.7 MLESWT-A1-0000-0004DV
M3 45.7 MLESWT-A1-0000-0003DV
E2 5750 K
N3 56.8 MLESWT-A1-0000-0005E2
N2 51.7 MLESWT-A1-0000-0004E2
M3 45.7 MLESWT-A1-0000-0003E2
DY 5500 K
N3 56.8 MLESWT-A1-0000-0005DY
N2 51.7 MLESWT-A1-0000-0004DY
M3 45.7 MLESWT-A1-0000-0003DY
DZ
5000 K
N3 56.8 MLESWT-A1-0000-0005DZ
N2 51.7 MLESWT-A1-0000-0004DZ
M3 45.7 MLESWT-A1-0000-0003DZ
A1
N2 51.7 MLESWT-A1-0000-0004A1
M3 45.7 MLESWT-A1-0000-0003A1
M2 39.8 MLESWT-A1-0000-0002A1
E3
N3 56.8 MLESWT-A1-0000-0005E3
N2 51.7 MLESWT-A1-0000-0004E3 MLESWT-H1-0000-0004E3
M3 45.7 MLESWT-A1-0000-0003E3 MLESWT-H1-0000-0003E3
M2 39.8 MLESWT-A1-0000-0002E3 MLESWT-H1-0000-0002E3
25
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
XLamp ML-E Series, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm) @
50 mA*
Order Codes
Kit CCT Code Flux (lm) Typical CRI (75) 80 CRI Minimum
F4
4750 K
N2 51.7 MLESWT-A1-0000-0004F4
M3 45.7 MLESWT-A1-0000-0003F4
M2 39.8 MLESWT-A1-0000-0002F4
A2
N2 51.7 MLESWT-A1-0000-0004A2
M3 45.7 MLESWT-A1-0000-0003A2
M2 39.8 MLESWT-A1-0000-0002A2
E4 4500 K
N2 51.7 MLESWT-A1-0000-0004E4
M3 45.7 MLESWT-A1-0000-0003E4
M2 39.8 MLESWT-A1-0000-0002E4
STANDARD ORDER CODES AND BINS (ML-E SERIES, WARM WHITE, TJ = 25 °C)
XLamp ML-E Series, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm)
@ 50 mA*
Order Codes
Kit CCT Code Flux
(lm) Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
ANSI Warm White (2600 K – 4300 K)
A3 4300 K
N2 51.7 MLESWT-A1-0000-0004A3
M3 45.7 MLESWT-A1-0000-0003A3
M2 39.8 MLESWT-A1-0000-0002A3
F5 4250 K
N2 51.7 MLESWT-A1-0000-0004F5
M3 45.7 MLESWT-A1-0000-0003F5
M2 39.8 MLESWT-A1-0000-0002F5
E5
4000 K
N2 51.7 MLESWT-A1-0000-0004E5
M3 45.7 MLESWT-A1-0000-0003E5 MLESWT-H1-0000-0003E5 MLESWT-P1-0000-0003E5
M2 39.8 MLESWT-A1-0000-0002E5 MLESWT-H1-0000-0002E5 MLESWT-P1-0000-0002E5 MLESWT-U1-0000-0002E5
K3 35.2 MLESWT-H1-0000-0001E5 MLESWT-P1-0000-0001E5 MLESWT-U1-0000-0001E5
Z5
N2 51.7 MLESWT-A1-0000-0004Z5
M3 45.7 MLESWT-A1-0000-0003Z5 MLESWT-H1-0000-0003Z5 MLESWT-P1-0000-0003Z5
M2 39.8 MLESWT-A1-0000-0002Z5 MLESWT-H1-0000-0002Z5 MLESWT-P1-0000-0002Z5 MLESWT-U1-0000-0002Z5
K3 35.2 MLESWT-H1-0000-0001Z5 MLESWT-P1-0000-0001Z5 MLESWT-U1-0000-0001Z5
A4
N2 51.7 MLESWT-A1-0000-0004A4
M3 45.7 MLESWT-A1-0000-0003A4
M2 39.8 MLESWT-A1-0000-0002A4
26
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
XLamp ML-E Series, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm)
@ 50 mA*
Order Codes
Kit CCT Code Flux
(lm) Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
A5
3750 K
M3 45.7 MLESWT-A1-0000-0003A5
M2 39.8 MLESWT-A1-0000-0002A5 MLESWT-H1-0000-0002A5 MLESWT-P1-0000-0002A5 MLESWT-U1-0000-0002A5
K3 35.2 MLESWT-H1-0000-0001A5 MLESWT-P1-0000-0001A5 MLESWT-U1-0000-0001A5
F6
M3 45.7 MLESWT-A1-0000-0003F6
M2 39.8 MLESWT-A1-0000-0002F6 MLESWT-H1-0000-0002F6 MLESWT-P1-0000-0002F6 MLESWT-U1-0000-0002F6
K3 35.2 MLESWT-H1-0000-0001F6 MLESWT-P1-0000-0001F6 MLESWT-U1-0000-0001F6
E6
3500 K
M3 45.7 MLESWT-A1-0000-0003E6
M2 39.8 MLESWT-A1-0000-0002E6 MLESWT-H1-0000-0002E6 MLESWT-P1-0000-0002E6 MLESWT-U1-0000-0002E6
K3 35.2 MLESWT-H1-0000-0001E6 MLESWT-P1-0000-0001E6 MLESWT-U1-0000-0001E6
Z6
M3 45.7 MLESWT-A1-0000-0003Z6
M2 39.8 MLESWT-A1-0000-0002Z6 MLESWT-H1-0000-0002Z6 MLESWT-P1-0000-0002Z6 MLESWT-U1-0000-0002Z6
K3 35.2 MLESWT-H1-0000-0001Z6 MLESWT-P1-0000-0001Z6 MLESWT-U1-0000-0001Z6
A6
M3 45.7 MLESWT-A1-0000-0003A6
M2 39.8 MLESWT-A1-0000-0002A6 MLESWT-H1-0000-0002A6 MLESWT-P1-0000-0002A6 MLESWT-U1-0000-0002A6
K3 35.2 MLESWT-H1-0000-0001A6 MLESWT-P1-0000-0001A6 MLESWT-U1-0000-0001A6
A7
3250 K
M3 45.7 MLESWT-A1-0000-0003A7
M2 39.8 MLESWT-A1-0000-0002A7 MLESWT-H1-0000-0002A7 MLESWT-P1-0000-0002A7 MLESWT-U1-0000-0002A7
K3 35.2 MLESWT-A1-0000-0001A7 MLESWT-H1-0000-0001A7 MLESWT-P1-0000-0001A7 MLESWT-U1-0000-0001A7
K2 30.6 MLESWT-H1-0000-0000A7 MLESWT-P1-0000-0000A7 MLESWT-U1-0000-0000A7
F7
M3 45.7 MLESWT-A1-0000-0003F7
M2 39.8 MLESWT-A1-0000-0002F7 MLESWT-H1-0000-0002F7 MLESWT-P1-0000-0002F7 MLESWT-U1-0000-0002F7
K3 35.2 MLESWT-A1-0000-0001F7 MLESWT-H1-0000-0001F7 MLESWT-P1-0000-0001F7 MLESWT-U1-0000-0001F7
K2 30.6 MLESWT-H1-0000-0000F7 MLESWT-P1-0000-0000F7 MLESWT-U1-0000-0000F7
E7
3000 K
M3 45.7 MLESWT-A1-0000-0003E7
M2 39.8 MLESWT-A1-0000-0002E7 MLESWT-H1-0000-0002E7 MLESWT-P1-0000-0002E7 MLESWT-U1-0000-0002E7
K3 35.2 MLESWT-A1-0000-0001E7 MLESWT-H1-0000-0001E7 MLESWT-P1-0000-0001E7 MLESWT-U1-0000-0001E7
K2 30.6 MLESWT-H1-0000-0000E7 MLESWT-P1-0000-0000E7 MLESWT-U1-0000-0000E7
Z7
M3 45.7 MLESWT-A1-0000-0003Z7
M2 39.8 MLESWT-A1-0000-0002Z7 MLESWT-H1-0000-0002Z7 MLESWT-P1-0000-0002Z7 MLESWT-U1-0000-0002Z7
K3 35.2 MLESWT-A1-0000-0001Z7 MLESWT-H1-0000-0001Z7 MLESWT-P1-0000-0001Z7 MLESWT-U1-0000-0001Z7
K2 30.6 MLESWT-H1-0000-0000Z7 MLESWT-P1-0000-0000Z7 MLESWT-U1-0000-0000Z7
A8
M3 45.7 MLESWT-A1-0000-0003A8
M2 39.8 MLESWT-A1-0000-0002A8 MLESWT-H1-0000-0002A8 MLESWT-P1-0000-0002A8 MLESWT-U1-0000-0002A8
K3 35.2 MLESWT-A1-0000-0001A8 MLESWT-H1-0000-0001A8 MLESWT-P1-0000-0001A8 MLESWT-U1-0000-0001A8
K2 30.6 MLESWT-H1-0000-0000A8 MLESWT-P1-0000-0000A8 MLESWT-U1-0000-0000A8
A9
2850 K
M2 39.8 MLESWT-A1-0000-0002A9
K3 35.2 MLESWT-A1-0000-0001A9 MLESWT-H1-0000-0001A9 MLESWT-P1-0000-0001A9 MLESWT-U1-0000-0001A9
K2 30.6 MLESWT-H1-0000-0000A9 MLESWT-P1-0000-0000A9 MLESWT-U1-0000-0000A9
F8
M2 39.8 MLESWT-A1-0000-0002F8
K3 35.2 MLESWT-A1-0000-0001F8 MLESWT-H1-0000-0001F8 MLESWT-P1-0000-0001F8 MLESWT-U1-0000-0001F8
K2 30.6 MLESWT-H1-0000-0000F8 MLESWT-P1-0000-0000F8 MLESWT-U1-0000-0000F8
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
27
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
XLamp ML-E Series, Standard Kit Codes - White
Chromaticity
Minimum Lumi-
nous Flux (lm)
@ 50 mA*
Order Codes
Kit CCT Code Flux
(lm) Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
E8
2700 K
M2 39.8 MLESWT-A1-0000-0002E8
K3 35.2 MLESWT-A1-0000-0001E8 MLESWT-H1-0000-0001E8 MLESWT-P1-0000-0001E8 MLESWT-U1-0000-0001E8
K2 30.6 MLESWT-H1-0000-0000E8 MLESWT-P1-0000-0000E8 MLESWT-U1-0000-0000E8
Z8
M2 39.8 MLESWT-A1-0000-0002Z8
K3 35.2 MLESWT-A1-0000-0001Z8 MLESWT-H1-0000-0001Z8 MLESWT-P1-0000-0001Z8 MLESWT-U1-0000-0001Z8
K2 30.6 MLESWT-H1-0000-0000Z8 MLESWT-P1-0000-0000Z8 MLESWT-U1-0000-0000Z8
AA
M2 39.8 MLESWT-A1-0000-0002AA
K3 35.2 MLESWT-A1-0000-0001AA MLESWT-H1-0000-0001AA MLESWT-P1-0000-0001AA MLESWT-U1-0000-0001AA
K2 30.6 MLESWT-H1-0000-0000AA MLESWT-P1-0000-0000AA MLESWT-U1-0000-0000AA
STANDARD ORDER CODES AND BINS (ML-E COLOR, TJ = 25 °C)
XLamp ML-E Standard Kit Codes - Red
Red
Minimum Lumi-
nous Flux (lm) @
150 mA*
Order Codes
Kit Dominant
Wavelengh (nm) Code Flux (lm)
01 620 - 630
J2 23.5 MLERED-A1-0000-000W01
H0 18.1 MLERED-A1-0000-000V01
02 620 - 625
J2 23.5 MLERED-A1-0000-000W02
H0 18.1 MLERED-A1-0000-000V02
03 625 - 630
J2 23.5 MLERED-A1-0000-000W03
H0 18.1 MLERED-A1-0000-000V03
XLamp ML-E Standard Kit Codes - Green
Green
Minimum Lumi-
nous Flux (lm) @
150 mA*
Order Codes
Kit Dominant
Wavelengh (nm) Code Flux (lm)
01 520 - 535
K3 35.2 MLEGRN-A1-0000-000101
K2 30.6 MLEGRN-A1-0000-000001
J3 26.8 MLEGRN-A1-0000-000X01
02 520 - 530
K3 35.2 MLEGRN-A1-0000-000102
K2 30.6 MLEGRN-A1-0000-000002
J3 26.8 MLEGRN-A1-0000-000X02
03 525 - 535
K3 35.2 MLEGRN-A1-0000-000103
K2 30.6 MLEGRN-A1-0000-000003
J3 26.8 MLEGRN-A1-0000-000X03
28
xlamp ml Family leds
binning & labeling
Copyright © 2009-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For product specications, please see the data sheets avail-
able at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
• Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80
• Cree XLamp order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum specied by the order code with-
out advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
XLamp ML-E Standard Kit Codes - Blue
Blue
Minimum Lumi-
nous Flux (lm) @
150 mA*
Order Codes
Kit Dominant
Wavelengh (nm) Code Flux (lm)
01 465 - 485
G0 13.9 MLEBLU-A1-0000-000U01
F0 10.7 MLEBLU-A1-0000-000T01
02 465 - 480
G0 13.9 MLEBLU-A1-0000-000U02
F0 10.7 MLEBLU-A1-0000-000T02
05 470 - 480
G0 13.9 MLEBLU-A1-0000-000U05
F0 10.7 MLEBLU-A1-0000-000T05
