Microwave MLC's AQ Series These porcelain and ceramic dielectric multilayer capacitor (MLC) chips are best suited for RF/ Microwave applications typically ranging from 10 MHz to 4.2 GHz. Characteristic is a fine grained, high density, high purity dielectric material impervious to moisture with heavy internal palladium electrodes. These characteristics lend well to applications requiring: 1) high current carrying capabilities; 2) high quality factors; 3) very low equivalent series resistance; 4) very high series resonance; 5) excellent stability under stresses of changing voltage, frequency, time and temperature. MECHANICAL DIMENSIONS: L W A 1J 10 T Case Length (L) Width (W) Thickness (T) Band Width (bw) AQ11 .055.015 (1.40.381) .055 + .015 - .010 (1.40+ .381 - .254) .110.020 (2.79.508) .110 + .020 - .010 (2.79 +.889 -.254) .055.015 (1.40.381) .055.015 (1.40.381) .110.020 (2.79.508) .110.010 (2.79.508) .020/.057 (.508/1.45) .020/.057 (.508/1.45) .030/.102 (.762/2.59) .030/.102 (.762/2.59) .010 + .010 -.005 (.254 +.254 -.127) .010 + .010 -.005 (.254 +.254 -.127) .015.010 (.381.254) .015.010 (.381.254) AQ12 AQ13 bw inches (millimeters) AQ14 HOW TO ORDER AQ 11 E M 100 J Case Size Capacitance (See Chart) EIA Capacitance Code in pF. First two digits = significant figures or "R" for decimal place. Third digit = number of zeros or after "R" significant figures. AVX Style AQ11, AQ12, AQ13, AQ14 6 Voltage Code 5 = 50V 1 = 100V E = 150V 2 = 200V 9 = 300V 7 = 500V Temperature Coefficient Code M = +9020ppm/C (AQ11/12/13/14) A = 030ppm/C (AQ11/12/13/14) C = 15% ("J" Termination only) (AQ12/14) A ME Failure Rate Code Packaging* Code A = Not Applicable 3A = 13" Reel ME = 7" Reel RE = 13" Reel WE = Waffle Pack Capacitance Tolerance Code B = .1 pF C = .25 pF D = .5 pF F = 1% G = 2% J = 5% K = 10% M = 20% N = 30% 1 Termination Style Code 1 = Pd/Ag (AQ11/13 only) 7 = Ag/Ni/Au (AQ11/13 only) J = Nickel Barrier Sn/Pb (60/40) (AQ12/14 only) T = 100% Tin (AQ12/14 only) PACKAGING Standard Packaging = Waffle Pack (maximum quantity is 80) TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481 (equivalent to IEC 286 part 3). Sizes SQCA through SQCB, CDR11/12 through 13/14. --8mm carrier --7" reel: 0.040" thickness = 2000 pcs 0.075" thickness = 2000 pcs --13" reel: 0.075" thickness = 10,000 pcs 106 Microwave MLC's AQ Series ELECTRICAL SPECIFICATIONS AQ11, AQ12, AQ13, AQ14 M&A Temperature Coefficient (TCC) Capacitance Range Operating Temperature Quality Factor (Q) M Dielectric A & B Case A Dielectric B Case A Dielectric A Case Insulation Resistance (IR) Working Voltage (WVDC) Dielectric Withstanding Voltage (DWV) Aging Effects Piezoelectric Effects Capacitance Drift (M) +90 20 PPM/C ( -55C to +125C) (M) +90 30 PPM/C ( +125C to +175C) (A) 0 30 PPM/C (M) 0.1 pF to 1000 pF (A) 0.1 pF to 5100 pF 0.1 pF to 330 pF: from -55C to +175C 360 pF to 5100 pF: from -55C to +125C Greater than 10,000 at 1 MHz Greater than 10,000 at 1 MHz Greater than 2,000 at 1 MHz Greater than 2,000 at 1 KHz Greater than 10,000 at 1 MHz Greater than 2,000 at 1 MHz 0.1 pF to 470 pF 106 Megohms min. @ 25C at rated WVDC 105 Megohms min. @ 125C at rated WVDC 510 pF to 5100 pF 105 Megohms min. @ 25C at rated WVDC 104 Megohms min. @ 125C at rated WVDC See Capacitance Values table 250% of rated WVDC for 5 secs (for 500V rated 150% of rated voltage) None None (0.02% or 0.02 pF), whichever is greater C 15% (-55C to 125C) 0.001F to 0.1F -55C to +125C 2.5% @ 1kHz 0.1 - 200 pF 220 - 1000 pF 1100 - 5100 pF 0.1 - 100 pF 110 - 1000 pF 104 Megohms min. @ 25C at rated WVDC 103 Megohms min. @ 125C at rated WVDC See Capacitance Values table 250% of rated WVDC for 5 secs <3% per decade hour None Not Applicable ENVIRONMENTAL CHARACTERISTICS AVX SQLB will meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123 Themal Shock Moisture Resistance Low Voltage Humidity Life Test Shock Vibration Immersion Salt Spray Solderability Terminal Strength Temperature Cycling Barometric Pressure Resistance to Solder Heat Mil-STD-202, Method 107, Condition A Mil-STD-202, Method 106 Mil-STD-202, Method 103, condition A, with 1.5 VDC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours Mil-STD-202, Method 108, for 2000 hours at 125C Mil-STD-202, Method 213, Condition J Mil-STD-202, Method 204, Condition B Mil-STD-202, Method 104, Condition B Mil-STD-202, Method 101, Condition B Mil-STD-202, Method 208 Mil-STD-202, Method 211 Mil-STD-202, Method 102, Condition C Mil-STD-202, Method 105, Condition B Mil-STD-202, Method 210, Condition C 6 107 Microwave MLC's AQ Series Available Capacitance/Size/WVDC/T.C. TABLE I: TC: M (+9020PPM/C) CASE SIZE 11, 12, 13 & 14 Case Length Width Thickness Band Width Avail. Term. 11 12 13 14 .055.015 (1.40.381) .055.025 (1.40.635) .110.020 (2.79.508) .110 +0.035 -0.020 (2.79 +.889 -.508) .055.015 (1.40.381) .055.015 (1.40.381) .110.020 (2.79.508) .110.020 (2.79.508) .020/.057 (.508/1.45) .020/.057 (.508/1.45) .030/.102 (.762/2.59) .030/.102 (.762/2.59) .010 +.010 -.005 (.254 +.254 -.127) .010 +.010 -.005 (.254 +.254 -.127) .015.010 (.381.254) .015.010 (.381.254) 1& 7 J 1& 7 J Case: AQ11, AQ12 6 DIMENSIONS: inches (millimeters) Cap. pF 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 108 Cap. Tol. B B B,C B,C B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, J, K, M B, C, J, K, M B, C, J, K, M B, C, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M WVDC 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 Case: AQ13, AQ14 Cap. pF 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 Cap. Tol. B B B,C B,C B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, J, K, M B, C, J, K, M B, C, J, K, M B, C, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M WVDC 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Cap. pF 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 Cap. Tol. F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M WVDC 500 300 300 300 300 300 300 300 200 200 200 200 200 200 200 200 200 150 150 150 150 150 150 150 150 Microwave MLC's AQ Series Available Capacitance/Size/WVDC/T.C. TABLE II: TC: A (030PPM/C) CASE SIZE 11, 12, 13 & 14 DIMENSIONS: inches (millimeters) Case Length Width Thickness Band Width Avail. Term. 11 12 13 14 .055.015 (1.40.381) .055.025 (1.40.635) .110.020 (2.79.508) .110 +0.035 -0.020 (2.79 +.889 -.508) .055.015 (1.40.381) .055.015 (1.40.381) .110.020 (2.79.508) .110.020 (2.79.508) .020/.057 (.508/1.45) .020/.057 (.508/1.45) .030/.102 (.762/2.59) .030/.102 (.762/2.59) .010 +.010 -.005 (.254 +.254 -.127) .010 +.010 -.005 (.254 +.254 -.127) .015.010 (.381.254) .015.010 (.381.254) 1& 7 J 1& 7 J Case: AQ13, AQ14 Case: AQ11, AQ12 Cap. pF Cap. Tol. WVDC 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 B B B,C B,C B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, J, K, M B, C, J, K, M B, C, J, K, M B, C, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 Cap. pF 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 Cap. Tol. WVDC Cap. pF Cap. Tol. WVDC Cap. pF Cap. Tol. WVDC F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 B B B,C B,C B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, J, K, M B, C, J, K, M B, C, J, K, M B, C, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4300 4700 5000 5100 F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M 500 500 500 500 500 500 500 500 300 300 300 300 300 300 300 200 200 200 200 200 200 200 200 200 150 150 150 150 150 150 150 150 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 TABLE III: TC: C (15%) CASE SIZE 12 & 14 Case: AQ12 Cap. pF Cap. Tol. 1000 1200 1500 1800 2000 K, M, N K, M, N K, M, N K, M, N K, M, N WVDC 50 50 50 50 50 Cap. pF Cap. Tol. 2200 2700 3300 3900 4700 K, M, N K, M, N K, M, N K, M, N K, M, N 6 WVDC 50 50 50 50 50 Case: AQ14 Cap. pF Cap. Tol. 5100 5600 6800 8200 10000 K, M, N K, M, N K, M, N K, M, N K, M, N WVDC 50 50 50 50 50 Cap. pF Cap. Tol. 5000 6800 8200 10000 12000 K, M, N K, M, N K, M, N K, M, N K, M, N WVDC 50 50 50 50 50 Cap. pF Cap. Tol. 15000 18000 27000 33000 39000 K, M, N K, M, N K, M, N K, M, N K, M, N WVDC 50 50 50 50 50 Cap. pF Cap. Tol. 47000 68000 82000 100000 K, M, N K, M, N K, M, N K, M, N WVDC 50 50 50 50 109 Microwave MLC's Performance Curves TYPICAL Q vs. FREQUENCY AQ11/12 MIL-PRF-55681E - BG STANDARD - M TYPICAL ESR vs. FREQUENCY AQ11/12 MIL-PRF-55681E - BG STANDARD - M 10000 1 1000 ESR (ohms) 0.1 Q 100 10 0.01 100 1000 100 Frequency (MHz) 1 Picofarad AVX CORPORATION 10 Picofarad 1000 Frequency (MHz) 100 Picofarad 3.3 Picofarad AVX CORPORATION 10 Picofarad 100 Picofarad TYPICAL ESR vs. CAPACITANCE AQ11/12 MIL-PRF-55681E - BG STANDARD - M TYPICAL Q vs. CAPACITANCE AQ11/12 MIL-PRF-55681E - BG STANDARD - M 1 10000 6 1000 ESR (ohms) 0.1 Q 100 10 1 10 100 0.01 1 250 MHz AVX CORPORATION 500 MHz 10 100 Capacitance (pF) Capacitance (pF) 1000 MHz 250 MHz AVX CORPORATION 500 MHz 1000 MHz 113 Microwave MLC's Performance Curves TYPICAL ESR vs. FREQUENCY AQ13/14 MIL-PRF-55681E - BG STANDARD - M TYPICAL Q vs. FREQUENCY AQ13/14 MIL-PRF-55681E - BG STANDARD - M 10000 1 1000 Q ESR (ohms) 0.1 100 10 100 1000 0.01 100 Frequency (MHz) AVX CORPORATION 10 Picofarad 47 Picofarad 1 Picofarad 1000 Frequency (MHz) 330 Picofarad TYPICAL Q vs. CAPACITANCE AQ13/14 MIL-PRF-55681E - BG STANDARD - M 10000 1 Picofarad AVX CORPORATION 15 Picofarad 100 Picofarad TYPICAL ESR vs. CAPACITANCE AQ13/14 MIL-PRF-55681E - BG STANDARD - M 1 6 1000 ESR (ohms) 0.1 Q 100 10 1 10 100 0.01 1 Capacitance (pF) 250 MHz 114 AVX CORPORATION 500 MHz 10 100 Capacitance (pF) 1000 MHz 250 MHz AVX CORPORATION 500 MHz 1000 MHz Microwave MLC's Performance Curves TYPICAL ESR vs. FREQUENCY AQ11/12 MIL-PRF-55681E - BP STANDARD - A TYPICAL Q vs. FREQUENCY AQ11/12 MIL-PRF-55681E - BP STANDARD - A 1 10000 1000 ESR (ohms) 0.1 Q 100 10 0.01 100 1000 100 Frequency (MHz) 1 Picofarad AVX CORPORATION 15 Picofarad 1000 Frequency (MHz) 100 Picofarad TYPICAL Q vs. CAPACITANCE AQ11/12 MIL-PRF-55681E - BP STANDARD - A 10000 1 Picofarad AVX CORPORATION 15 Picofarad 100 Picofarad TYPICAL ESR vs. CAPACITANCE AQ11/12 MIL-PRF-55681E - BP STANDARD - A 1 6 1000 ESR (ohms) 0.1 Q 100 10 1 10 100 0.01 1 Capacitance (pF) 250 MHz AVX CORPORATION 500 MHz 10 100 Capacitance (pF) 1000 MHz 250 MHz AVX CORPORATION 500 MHz 1000 MHz 115 Microwave MLC's Performance Curves TYPICAL ESR vs. FREQUENCY AQ13/14 MIL-PRF-55681E - BP STANDARD - A TYPICAL Q vs. FREQUENCY AQ13/14 MIL-PRF-55681E - BP STANDARD - A 1 10000 1000 ESR (ohms) 0.1 Q 100 10 0.01 100 1000 100 2 Picofarad AVX CORPORATION 15 Picofarad 1000 Frequency (MHz) Frequency (MHz) 100 Picofarad 15 Picofarad TYPICAL Q vs. CAPACITANCE AQ13/14 MIL-PRF-55681E - BP STANDARD - A 10000 AVX CORPORATION 47 Picofarad 100 Picofarad TYPICAL ESR vs. CAPACITANCE AQ13/14 MIL-PRF-55681E - BP STANDARD - A 1 6 1000 ESR (ohms) 0.1 Q 100 10 1 10 100 0.01 1 Capacitance (pF) 250 MHz 116 AVX CORPORATION 500 MHz 10 100 Capacitance (pF) 1000 MHz 250 MHz AVX CORPORATION 500 MHz 1000 MHz Microwave MLC's Performance Curves TYPICAL RESONANT FREQUENCY vs. CAPACITANCE AVX AQ11-14 (CDR11-14) 10 AQ11/12 AQ13/14 Parallel Resonant Frequency Frequency (GHz) AQ11/12 AQ13/14 1.0 Series Resonant Frequency 0.1 1.0 100 10 1000 Capacitance (pF) TYPICAL RESONANT FREQUENCY vs. CAPACITANCE AVX 0603 Frequency (GHz) 10 Parallel Resonant Frequency 6 1.0 Series Resonant Frequency 0.1 1 100 10 1000 Capacitance (pF) 117 Microwave MLC's Automatic Insertion Packaging TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481 (equivalent to IEC 286 part 3). Sizes SQCA through SQCB, CDR11/12 through 13/14. "U" Series - 402/0603/0805/1210 Size Chips --8mm carrier --7" reel: 0.040" thickness = 2000 pcs 0.075" thickness = 2000 pcs --13" reel: 0.075" thickness = 10,000 pcs --8mm carrier --7" reel: 0402 = 10,000 pcs 0603 & 0805 0.40" thickness = 4000 pcs 0805 . 0.040" thickness & 1210 = 2000 pcs --13" reel: 0.075" thickness = 10,000 pcs REEL DIMENSIONS: millimeters (inches) Tape A B* Size(1) Max. Min. C D* N Min. Min. 8mm 330 1.5 13.00.20 20.2 50 (12.992) (.059) (.512.008) (.795) (1.969) W1 W2 Max. W3 7.9 Min. 1.0 8.4 +-0.0 14.4 (.311) +.060 (.331 -0.0 ) (.567) 10.9 Max. (.429) 11.9 Min. 12.4 +2.0 -0.0 18.4 (.469) (.488 +.076 -0.0 ) (.724) 15.4 Max. (.607) 12mm Metric dimensions will govern. English measurements rounded and for reference only. (1) For tape sizes 16mm and 24mm (used with chip size 3640) consult EIA RS-481 latest revision. EMBOSSED CARRIER CONFIGURATION 8 & 12 MM TAPE ONLY CONSTANT DIMENSIONS Tape Size D0 E 8mm and 12mm +0.10 8.4 -0.0 (.059 +.004 -0.0 ) 1.75 0.10 (.069 .004) P0 P2 T Max. T1 G1 G2 4.0 0.10 2.0 0.05 0.600 0.10 0.75 0.75 (.157 .004) (.079 .002) (.024) (.004) (.030) (.030) Max. Min. Min. See Note 3 See Note 4 VARIABLE DIMENSIONS Tape Size 6 8mm 12mm B1 Max. D1 Min. See Note 6 See Note 5 4.55 (.179) 8.2 (.323) 1.0 (.039) 1.5 (.059) F P1 R Min. 3.5 0.05 (.138 .002) 5.5 0.05 (.217 .002) 4.0 0.10 (.157 .004) 4.0 0.10 (.157 .004) T2 W A0B0K0 2.5 Max (.098) 6.5 Max (.256) 8.0 +0.3 -0.1 (.315 +.012 -.004 ) 12.0 .30 (.472 .012) See Note 1 See Note 2 25 (.984) 30 (1.181) See Note 1 NOTES: 1. A0, B0, and K0 are determined by the max. dimensions to the ends of the terminals extending from the component body and/or the body dimensions of the component. The clearance between the end of the terminals or body of the component to the sides and depth of the cavity (A0, B0, and K0) must be within 0.05 mm (.002) min. and 0.50 mm (.020) max. The clearance allowed must also prevent rotation of the component within the cavity of not more than 20 degrees (see sketches C & D). 2. Tape with components shall pass around radius "R" without damage. The minimum trailer length (Note 2 Fig. 3) may require additional length to provide R min. for 12mm embossed tape for reels with hub diameters approaching N min. (Table 4). 118 3. G1 dimension is the flat area from the edge of the sprocket hole to either the outward deformation of the carrier tape between the embossed cavities or to the edge of the cavity whichever is less. 4. G2 dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier tape between the embossed cavity or to the edge of the cavity whichever is less. 5. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 6. B1 dimension is a reference dimension for tape feeder clearance only.