NTC Disc Thermistors ND 03/06/09 * NE 03/06/09 * NV 06/09 APPLICATIONS * Commodity Product: 2 families ND or NE : general purpose NV : professional * Alarm and temperature measurement application * Temperature regulation application * Level detection application * Compensation application TECHNOLOGY * ND: epoxy-phenolic resin coating NE: epoxy resin coating (recommended for severe mounting conditions) NV: epoxy varnish coating * Leads: Radial copper wire tinned * Marking: on package only for ND03 & NE03 ND/NE 06/09:Nominal resistance and tolerance for 5%, 10% NV06/09: Nominal resistance and tolerance * Delivery Mode: Bulk, reeled or ammopacked Leaded Discs N.03 N.06 N.09 PERFORMANCE CHARACTERISTICS General purpose Types ND03 or NE03 Climatic category Operating Temperature Tolerance on Rn (25C) ND06 or NE06 Professional ND09 or NE09 NV06 NV09 55/125/56-434 -55 to +150C 2%, 5%, 10% -55 to +150C 330 to 1M : 5, 10, 20% 1500 to 150 k : 3% -55 to +150C 5%, 10%, 20% -55 to +150C 5%, 10%, 20% 55/125/56-434 -55 to +150C 2%, 5%, 10% 0.25 W 0.71 W 0.9 W 0.69 W 0.85 W 5 mW/C 10 s < 3s 7.1 mW/C 22 s 9 mW/C 30 s 6.9 mW/C 18 s 8.5 mW/C 30 s Maximum dissipation at 25C Thermal dissipation factor Thermal time constant Response time STANDARDIZATION OPTIONS NV range : approved by NFC 93271 Type: TN115 A for NV06 TN116 for NV09 List: GAM-T1 List: LNZ Consult factory for availability of options: * other nominal resistance values * other tolerances * alternative lead materials or lengths * controlled dimensions 21 NTC Disc Thermistors ND/NE 03 TABLE OF VALUES ND03/NE03 TYPE ND03/NE03 3.5 (.138) max 35 (1.38) min 3 (.118) max 3 (.118) max +10% o 0.5 (.020)-0.05 2.54 (0.1) Part Number Rn at 25C () Material Code B (K) (B/B (1) 5% (2) 3% ) at 25C (%/C) N_03I00331 N_03I00471 330 470 I 3250 (1) - 3.7 N_03J00681 N_03J00102 680 1,000 J 3480 (2) - 3.9 N_03K00152 N_03K00222 1,500 2,200 K 3630 (2) - 4.0 N_03L00272 N_03L00332 2,700 3,300 L 3790 (2) - 4.2 N_03M00472 N_03M00682 4,700 6,800 M 3950 (2) - 4.4 N_03N00103 N_03N00153 10,000 15,000 N 4080 (2) - 4.6 N_03P00223 N_03P00333 22,000 33,000 P 4220 (2) - 4.7 N_03Q00473 N_03Q00683 47,000 68,000 Q 4300 (2) - 4.7 N_03R00104 N_03R00154 100,000 150,000 R 4400 (2) - 4.8 N_03S00224 220,000 S 4520 (2) - 5.0 N_03T00334 N_03T00474 330,000 470,000 T 4630 (2) - 5.1 N_03U00105 1,000,000 U 4840 (2) - 5.3 22 NTC Disc Thermistors ND/NE/NV 06 ND06/NE06 4 (.157) max 6.3 (.248) max 35 (1.38) min 3 (.118) max 6.3 (.248) max 35 (1.38) min NV06 +10% o 0.6 (.024)-0.05 5.08 (0.2) Part Number Rn at 25C () Material Code 3.5 (.138) max 3 (.118) max TABLE OF VALUES ND06/NE06/NV06 +10% o 0.6 (.024)-0.05 5.08 (0.2) B (K) (B/B (1) 5% (2) 3% ) at 25C (%/C) N_06J00151 N_06J00221 150 220 J 3480 (2) - 3.9 N_06K00331 N_06K00471 330 470 K 3630 (2) - 4.0 N_06L00681 N_06L00102 680 1,000 L 3790 (2) - 4.2 N_06M00152 1,500 M 3950 (2) - 4.4 N_06N00222 N_06N00332 2,200 3,300 N 4080 (2) - 4.6 N_06P00472 N_06P00682 N_06P00103 4,700 6,800 10,000 P 4220 (2) - 4.7 N_06Q00153 N_06Q00223 15,000 22,000 Q 4300 (2) - 4.7 N_06R00333 33,000 R 4400 (2) - 4.8 N_06S00473 N_06S00683 47,000 68,000 S 4520 (2) - 5.0 N_06T00104 100,000 T 4630 (2) - 5.1 N_06U00154 N_06U00224 N_06U00334 150,000 220,000 330,000 U 4840 (2) - 5.3 For other resistance values, please consult us. 23 NTC Disc Thermistors ND/NE/NV 09 TABLE OF VALUES ND09/NE09/NV09 ND09/NE09 9.5 (.374) max 35 (.138) min +10% o 0.6 (.024) -0.05 +10% o 0.6 (.024) -0.05 5.08 (.02) Part Number Rn at 25C () Material Code 3.5 (.138) max 3 (.118) max 5 (.197) max 3 (.118) max 35 (.138) min 9.5 (.375) max NV09 5.08 (.02) B (K) (B/B (1) 5% (2) 3% ) at 25C (%/C) N_09J00680 N_09J00101 68 100 J 3480 (2) - 3.9 N_09K00151 N_09K00221 150 220 K 3630 (2) - 4.0 N_09L00331 330 L 3790 (2) - 4.2 N_09M00471 N_09M00681 470 680 M 3950 (2) - 4.4 N_09N00102 N_09N00152 1,000 1,500 N 4080 (2) - 4.6 N_09P00222 N_09P00332 2,200 3,300 P 4220 (2) - 4.7 N_09Q00472 N_09Q00682 4,700 6,800 Q 4300 (2) - 4.7 N_09R00103 N_09R00153 10,000 15,000 R 4400 (2) - 4.8 N_09S00223 22,000 S 4520 (2) - 5.0 N_09T00333 N_09T00473 33,000 47,000 T 4630 (2) - 5.1 N_09U00683 N_09U00104 N_09U00154 68,000 100,000 150,000 U 4840 (2) - 5.3 24 NTC Disc Thermistors Packaging for Automatic Insertion PACKAGING AND KINK SUFFIXES Tables below indicate the suffixes to specify when ordering to get the required kink and packaging. For devices on tape, it is necessary to specify the height (H or Ho) which is the distance between the tape axis (sprocket holes axis) and the seating plane on the printed circuit board. The following types can be ordered on tape either in AMMOPACK (fan folder) or on REEL in accordance with IEC 286-2. - Straight leads: H represents the distance between the sprocket holes axis and the bottom plane of component body (base of resin or base of stand off). - Kinked leads and flat leads: Ho represents the distance between the sprocket holes axis and the base on the knee (kinked leads) or the bottom of the flat part (flat leads). * Reel & Ammopack millimeters (inches) Types Suffix ND/NE 03 & NJ28 16 (0.630 16 (0.630 19.5 (0.768 19.5 (0.768 16 (0.630 16 (0.630 19.5 (0.768 19.5 (0.768 16 (0.630 16 (0.630 19.5 (0.768 19.5 (0.768 CA CB CC CD ND/NE/NV 06/09 H or Ho DA DB DC DD DL DM DN DP 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5) 0.020) 0.5 0.020) 0.5 0.020) Leads Quantity/Size Packaging Straight 3000 AMMOPACK Straight 3000 REEL Straight 3000 AMMOPACK Straight 3000 REEL Straight 1500 AMMOPACK Straight 1500 REEL Straight 1500 AMMOPACK Straight 1500 REEL Kinked 1500 AMMOPACK Kinked 1500 REEL Kinked 1500 AMMOPACK Kinked 1500 REEL NTC H Type ND03 NE03 NJ28 2.54 (0.10) NTC Types ND/NE/NV 06/09 H Ho 5.08 (0.20) * Bulk Type Quantity/box ND/NE03 ND/NE06 ND/NE09 NV06 NV09 NI24 NJ28 NK20 3000 1500 1500 100 100 1000 HOW TO ORDER ND06 P0 0103 K -- Type Material Code P Resistance 10 k Tolerance K (10%) Packaging Bulk 25 Automatic Insertion NTC Disc Thermistors TAPING CHARACTERISTICS Missing components A maximum of 3 consecutive components may be missing from the bandolier, surrounded by at least 6 filled positions. The number of missing components may not exceed 0.5% of the total per packing module. DIMENSIONS: The beginning and the end of tape exhibit 8 or 9 blank positions. millimeters (inches) REEL AMMOPACK 30 (1.18) Interlayer Paper H 8 (.315) L 42 (1.66) Inside I L 330 (13.0) h 31 (1.22) I 46 (1.81) H 290 (11.4) 48(1.99) Outside 360 (14.2) P h p p Marking on this side Reference plane H1 P1 W2 H1 E A B H W0 H0 W1 W Adhesive tape I2 d D0 P0 Direction of unreeling Cross section t A-B E Value 18 6 9 3 max. Tolerance +1 / -0.5 0.3 +0.75 / -0.5 4 16/19.5 0.2 0.5 W W0 W1 W2 D0 H0 H1 26 Dimensions Characteristics Leading tape width Adhesive tape width Sprocket hole position Distance between the top of the tape and the adhesive Diameter of sprocket hole Distance between the tape axis and the seating plane of the component Distance between the tape axis and the top of component body Value 12.7 254 Tolerance 0.2 1 0.7 0.2 +0.6 -0.1 2.54 5.08 5.08 P0 - t E 3.85 0.7 P1 12.7 0.5 0.6 0 0 1.0 5% 1.3 2 P d 3P 3h Dimensions Characteristics Sprocket holes pitch Distance between 21 consecutive holes 20 pitches Total thickness of tape Lead spacing Distance between the sprocket hole axis and the lead axis Spacing of components Lead diameter Verticality of components Alignment of components