S/MOD/SLD03205/B/10/04/2002 page 1 / 3 F/GB Relais Statique miniature sortie DC DC SLIM Solid State Relay SLD0x205 DC input 24VDC 4A output * Compatibilite du brochage avec les Relais Electro-mecaniques . * Commande 5 , 12, 24 et 48 VDC selon modeles * Sortie 24VDC - 4A ( voir derating en temperature) * Ecreteur de surtension integre. * Pin to pin compatible with Electromechanic Relays. * 5 ; 12; 24 and 48VDC control * 24VDC - 4A output ( see derating curve) * Integrated clamping voltage. grid 0,1"/ grille 2,54mm top view/vue de dessus 5 (0.20) 15 (0.59) 28 (1.10) 3,5 (0.14) A2 - 3,8 (0.15) 0,5 x 0,4mm (0.02 x 0.015) (-) 16,5 (0.65) 5,1 (0.20) Vue de dessous Bottom View 4 3 (+) INPUT - + A1 + 2 - o 0,8 mm 1,4 (0.06) 2 (0.08) 0.15 1 x 0,4mm (0.04 x 0.015) 2 - o 1,1mm 0.20 0.65 PCB Layout (+) 2 1 (-) OUTPUT Caracteristiques de commande (a 20C) / Control characteristics (at 20C) Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc nom ) Tension de relachement/Release voltage Resistance interne / Input internal resistor SLD01205 SLD02205 SLD03205 SLD04205 DC DC DC DC Symbol Min Nom Max Min Nom Max Min Nom Max Min Nom Max Unit Uc 3 5 10 7 12 20 18 24 32 38 48 58 V Ic 5,5 Uc off Rc 12 27 5,5 10 18 1,8 5,5 7,7 10,2 3,6 320 3,5 4,4 8,3 1070 3000 5,3 mA 8,3 V 10800 Caracteristiques generales / General characteristics Parameter Plage de temperature de fonctionnement /Operating temperature range Plage de temperature de stockage /Storage temperature range Isolement entree-sortie / Input-output isolation Conditions Boitier / Case Boitier / Case Poids/Weight Temperature de soudage max / Maximum soldering heat(1 mm boitier/case) Conformite / Conformity Homologation / Approved Proud to serve you All technical characteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. Symbol Tc max Tc max Typ. -20 / +80 C -25 / +80 C 2500 VRMS 8 g Ts max 220 C IEC60947-5-1 & IEC60947-1 UL pending 10 s celduc r e l a i s S/MOD/SLD03205/B/10/04/2002 page 2 / 3 F/GB Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Courant nominal DC12/ DC-12 nominal current (Resistive loads...) Courant nominal DC13/ DC13 nominal current (Electromagnets) Courant nominal DC6/ DC-6 nominal current (Lamps) Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Resistance de sortie a l'etat on / Static output on-resistance Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Conditions Symbol Typ. Unit Ul 24 V Ulmin-max 0-32 V ( see Fig. 2 ) Il DC-12 4 A ( see Fig. 2 ) Il DC-13 4 A ( see Fig. 2 &3) Il DC-6 4 A tp=1s (Fig. 3) Il pulse 9A A @ Il nom, Vd 0,24V @ 2A V Uc nom , Il=2A R on max 120 m @Ul=24V Ilk max <1 mA Ilmin 1 mA Uc nom DC ton max 50 s Uc nom DC, f=50Hz toff max 600 s Uc nom DC fs 10 Hz oui/ yes @1mA Ubr min 36 V Pulse 10/1000s Pr 600 W Up max 60 V IEC 1000-4-4 (bursts) 1kV criterion A /4kV criterion B IEC 1000-4-5 (shocks) Control :0,5kV crit. A Output 1kV crit. A Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Frequence max de commutation / Operating switching frequency Transil de protection contre les surtension/Transient voltage suppressor -Tension d'ecretage/ Breakdown voltage -Puissance maximum / Peak power dissipation -Tension crete (ecreteur de tension) / Peak voltage (clamping voltage) EMC Test d'immunite conduite/Conducted immunity level EMC Test d'immunite conduite/Conducted immunity level Fig. 3 : Courant de surcharge non repetitif / Non repetitive surge current Fig. 2 : Courant en fonction de la temperature ambiante / Load current vs. ambient temperature characteristics Surge current Itsm (Apeak) = f(t) 5 4,5 50 4 3,5 40 Itsm (Apeak) I (A) 5,5 3 2,5 2 1,5 1 0,5 10 20 30 40 50 60 70 20 10 0 0,001 0 0 30 80 0,01 0,1 1 10 t(s) Tambient(C) Precautions : * Dans le cas de plusieurs modules cote a cote, prevoir un derating en courant. * Sur charges inductives prevoir une diode de roue libre (ou ecreteur de surtension ). Voir page 3. Cautions : * In case of many SSRs side by side , take a derating current in to account . * On inductive loads put a free-wheeling diode (or clamp ). See page 3. celduc r e l a i www.celduc.com s Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 S/MOD/SLD03205/B/10/04/2002 page 3 / 3 F/GB Fonctionnement sur charge Inductive Application on Inductive load Application type : Typical application : a) Utilisation d'une diode de roue libre (DRL) Using Free wheel diode (DRL). Electovanne / Valve +24VDC Une diode de roue libre sur la charge protege correctement le relais mais augmente le temps d'ouverture de la charge. SLD DRL A free wheel diode protect the relay, but the turn OFF time increases. 0VDC b) Utilisation de la protection interne au relais (Dz) Using internal voltage protection of the relay ( Dz) +24VDC SLD Dz La diode de protection interne au relais (Dz) peut etre utilisee dans la limite de sa puissance dissipee, ce qui limite la frequence de commutation : F max = 0,6/LI2 ( L= inductance de la charge ; I = courant de charge) The internal voltage protection (Dz)of the relay can be used but the switching frequency must be adapted to the max power dissipation of the internal protection : F max = 0,6/LI2 ( L= inductance of the load ; I = load current) 0VDC c) Utilisation de protection transils ou VDR sur la charge : utiliser relais de tension superieure : voir fiche technique SLD0x210 Using transils or VDR protection on the load : use a higher voltage relay : see SLD0x210 data-sheet +24VDC SLD 0VDC celduc r e l a i www.celduc.com s Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19