Home About Vector Distributors Sales Contact Us Catalog Request CG2 Series Card Guides for EIA Subracks and VectorPak System Length Centers Part No. Type Card Length A B CG2-45P Plastic, Screw-in 2.89" 2.25" 4.50" CG2-45S Nylon, Snap-in 3.17" 2.25" 4.50" CG2-50P Plastic, Screw-in 4.39" 3.75" 5.00" CG2-65M Metal, Screw-in 5.42" 4.50" 6.50" CG2-65P Plastic, Screw-in 5.42" 4.50" 6.50" CG2-65S Nylon, Snap-in 5.42" 4.50" 6.50" CG2-80P Plastic, Screw-in 6.64" 6.00" 8.00" CG2-80S Nylon, Snap-in 6.93" 7.50" 8.00" CG2-95M Metal, Screw-in 8.14" 7.50" 9.50" CG2-95P Plastic, Screw-in 8.14" 7.50" 9.50" CG2-95S Nylon, Snap-in 8.43" 7.50" 9.50" Application Card Guides Detail Description High quality Snap-in card guides feature tapered slots for easy insertion and removal without tools. Snap-in card guide can be positioned at 0.25" increments when used with Vector-Pak T-struts (TS169-6/90). Holes for mounting guides to struts are based on center-to-center multiples of 0.75". Screw mounted models are available in metal or plastic { installation hardware included } Screw mounted metal or plastic card guides provide variable positioning along entire length of strut. Metal or plastic screw down card guides attach with SC4-27/25 flat head screw and NT4-7PA square nut as shown in drawing. All materials are flame retardant.. email us your Requirements : inquire@vectorelect.com 11115 Vanowen St., North Hollywood, CA - 91605, USA , Tel: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax: ( 818 ) 985 7708 Circbord(R), Vectorbord(R) and VectorPak(R) are registered trademarks of Vector Electronics & Technology, Inc. CompactPCI(R) is a registered trademark of PCIMG. (c) 2001 Vector Electronics & Technology, Inc. - All Rights Reserv ed webmaster@vectorelect.com