Home About Vector Distributors Sales Contact Us Catalog Request
Description
High quality Snap-in card guides feature tapered slots for easy insertion and removal without tools.
Snap-in card guide can be positioned at 0.25” increments when used with Vector-Pak T-struts (TS169-6/90).
Holes for mounting guides to struts are based on center-to-center multiples of 0.75”.
Screw mounted models are available in metal or plastic { installation hardware included }
Screw mounted metal or plastic card guides provide variable positioning along entire length of strut.
Metal or plastic screw down card guides attach with SC4-27/25 flat head screw and NT4-7PA square nut as shown in drawing.
All materials are flame retardant..
CG2 Series Card Guides for EIA Subracks and VectorPak System
Part No. Type
Length
A
Centers
B
Card Length Application
CG2-45P Plastic, Screw-in 2.89" 2.25" 4.50"
CG2-45S Nylon, Snap-in 3.17" 2.25" 4.50"
CG2-50P Plastic, Screw-in 4.39" 3.75" 5.00"
CG2-65M Metal, Screw-in 5.42" 4.50" 6.50"
CG2-65P Plastic, Screw-in 5.42" 4.50" 6.50"
CG2-65S Nylon, Snap-in 5.42" 4.50" 6.50"
CG2-80P Plastic, Screw-in 6.64" 6.00" 8.00"
CG2-80S Nylon, Snap-in 6.93" 7.50" 8.00"
CG2-95M Metal, Screw-in 8.14" 7.50" 9.50"
CG2-95P Plastic, Screw-in 8.14" 7.50" 9.50"
CG2-95S Nylon, Snap-in 8.43" 7.50" 9.50"
Card Guides Detail
email us your Requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA - 91605, USA , Tel: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax: ( 818 ) 985 7708
Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserv ed
webmaster@vectorelect.com
