SIPART DR22 SIPART DR24 Regler/Controller 6DR2210-4/-5 Regler/Controller 6DR2410-4/-5 Montage- und Installationshinweise/ Assembly and Installation Information C79000-M7474-C38-02 Regler SIPART DR22 SIPART DR22 controller Regler SIPART DR24 SIPART DR24 controller Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seite 1 English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 13 SIPART ist ein eingetragenes Warenzeichen der Siemens AG. Die ubrigen Bezeichnungen in diesem Handbuch konnen Marken sein, deren Benutzung durch Dritte fur deren Zwecke die Rechte der Inhaber verletzen konnen. SIPART is a Siemens registered trademark. All other product and system names are (registered) trademarks of their respective owners and must be treated accordingly. Weitergabe sowie Vervielfaltigung dieser Unterlage, Verwertung und Mitteilung ihres Inhaltes nicht gestattet, soweit nicht ausdrucklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere fur den Fall der Patenterteilung oder GM-Eintragung. Technische Anderungen vorbehalten. Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. Subject to technical alteration Montage- und Installationshinweise Inhaltsverzeichnis Seite 1 Allgemeine Hinweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 Sicherheitstechnische Hinweise . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 Lieferumfang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 Wesentliche technische Daten . . . . . . . . . . . . . . . . . . . . . . . . . . 3 5 5.1 5.2 5.3 5.4 Arbeiten vor dem Einbau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rangierung Netz 230 V~/115 V~ . . . . . . . . . . . . . . . . . . . . . . . . . Rangierung AE1 bis AE3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frontfolie beschriften . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Module einsetzen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 5 5 6 6 Mechnischer Einbau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7 7.1 7.2 7.3 7.4 Elektrischer Anschlu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Beschaltung Grundgerat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Verhalten des Gerates nach dem Zuschalten der Netzspannung Beschaltung Signalumformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gerat an die Versorgungsspannung anschlieen . . . . . . . . . . . . 8 8 10 10 11 1 Allgemeine Hinweise Die Montage- und Installationshinweise versetzen Sie in die Lage, die vorbereitenden Arbeiten sowie den elektrischen Anschlu des Grundgerates auszufuhren. Weitergehende Informationen uber das Parametrieren und Strukturieren sowie uber die Beschaltung der Signalumformer finden Sie in den Handbuchern SIPART DR22 und SIPART DR24. Die Handbucher konnen Sie bei einer der Siemens-Niederlassungen unter folgenden Bestellnummern beziehen: SIPART DR22 SIPART DR24 deutsch englisch deutsch englisch C79000-G7400-C154 C79000-G7476-C154 SIPART DR22/DR24 C79000-M7474-C38-02 C79000-G7400-C153 C79000-G7476-C153 1 Montage- und Installationshinweise 2 Sicherheitstechnische Hinweise ! WARNUNG Die in dieser Anleitung angegebenen Hinweise und Warnvermerke sind wichtige Informationen uber das Produkt und mussen fur einen gefahrlosen Betrieb besonders beachtet werden. Wenn das Gerat auere Beschadigungen aufweist, darf es nicht angeschlossen werden. Beim Betrieb elektrischer Betriebsmittel stehen zwangslaufig bestimmte Teile dieser Gerate unter gefahrlicher Spannung. Bei Nichtbeachtung der Warnhinweise konnen deshalb schwere Korperverletzungen oder Sachschaden auftreten. An diesem Gerat sollte deshalb nur qualifiziertes Personal arbeiten. 3 Lieferumfang Im Lieferumfang sind enthalten: - 1 Regler entsprechend der Bestellung 1 Kaltgeratestecker fur 230 V/115 V oder ein Spezialstecker fur Hilfsenergie UC 24V 2 Spannelemente, steckbar 1 Anleitung "Montage- und Installationshinweise" Steckbare Schraubklemmen fur die Anschlusse des Grundgerates Grundgerate: Bestellnummer 6DR2210-4 6DR2210-5 Netzspannung Hilfsenergie UC 24 V Hilfsenergie AC 230 V/115 V umschaltbar 6DR2410-4 6DR2410-5 Hilfsenergie UC 24 V Hilfsenergie AC 230 V/115 V umschaltbar Signalumformer: Signalumformer haben getrennte Bestell- und Lieferpositionen. Aus abwicklungstechnischen Grunden ist es moglich, da gemeinsam bestellte Grundgerate und Signalumformer mit getrennter Post geliefert werden. 2 SIPART DR22/24 C79000-M7474-C38-02 Montage- und Installationshinweise 4 Wesentliche technische Daten Einbaulage beliebig Klimatische Anwendungsklasse im Betrieb 3k3 DIN/IEC 721 T3-3 Zulassige Umgebungstemperatur im Betrieb 0 bis 50C Schutzart nach Bedien- und Anzeigeeinheit Gehause / Anschluklemmen EN 60529 IP 64 IP30 / IP20 Mae siehe "Mechanischer Einbau" Nennspannung AC (umschaltbar) 115 V ~/ 230 V~ 15% 47 bis 63 Hz max. Leistungsaufnahme Nennspannung UC 15 W / 19 VA 24 V =/~ DC 20 bis 28 V AC 24 V~ 15%; 47 bis 63 Hz Analogeingange AE1 bis AE3 potentialfrei bis 10 V Gleichtakt Strom Nennsignalbereich Aussteuerbereich Eingangswiderstand Gleichtaktspannung 0/4 bis 20 mA -1 bis 21 mA 49,9 Ohm 0 bis +10 V Spannung Nennsignalbereich Eingangswiderstand 0/199,6 bis 998mV oder 0/2 bis 10V > 200 KOhm Analogausgange AA1 bis AA3 Nennsignalbereich Burdenspannung potentialgebunden 0/4 bis 20 mA ab -1 bis 18V Binareingange Signalzustand 0 Signalzustand 1 statische Zerstorgrenze potentialgebunden 4,5 V oder offen 13 V 35 V Binarausgange Signalzustand 0 Signalzustand 1 Laststrom potentialgebunden 1,5 V +19 bis 26 V 50 mA Gerateauslegung - nach EN 61010 Teil 1 - Schutzklasse I nach IEC 536 - Ausgange sind Funktionskleinspannungen CE-- Kennzeichen EG-Konformitatserklarung Nr. DR22/24-2/98 SIPART DR22/DR24 C79000-M7474-C38-02 3 Montage- und Installationshinweise 5 Arbeiten vor dem Einbau 5.1 Rangierung Netz 230 V~/115 V~ Die Gerate 6DR2210-5 und 6DR2410-5 konnen von 230 V auf 115 V umrangiert werden. Umrangierung auf der Ruckseite mit geeignetem Schraubendreher (Wahlschalter Netzspannung). Werkseinstellung: 230 V 1 Legende: 1 Schutzleiter - Kontaktfeder 2 Steckplatz 6 3 Steckplatz 5 4 Steckplatz 1 (Grundleiterplatte) 5 Steckplatz 2 6 Steckplatz 3 7 Steckplatz 4 (SES: RS 232/ 12 11 2 10 9 RS485, PROFIBUS DP) Erdungsschraube Hutschiene (wird mit den Koppelrelais geliefert) 10 Wahlschalter Netzspannung 11 Netzstecker 12 Netzteil 8 9 8 3 7 Bild 3 4 6 5 4 Ruckwandbaugruppe, Steckplatze und Anschluebene SIPART DR22/24 C79000-M7474-C38-02 Montage- und Installationshinweise 5.2 Rangierung AE1 bis AE3 Die Eingange AE1 bis AE3 konnen auf der Grundleiterplatte umrangiert werden. Folgende Bereiche sind moglich: 1 V, 10 V, I (20 mA). Werkseinstellung: I (20 mA) 1V 10V I AE3 1V 10V I 1V 10V I AE2 AE1 Werkseinstellung I (0 bis 20 mA) Hauptleiterplatte C73451-A3001-L32 Bild 4 Rangierung auf der Grundleiterplatte Vorgehensweise: 1 Frontbaugruppe entnehmen. 1.1 Abdeckung Mestellenschild entnehmen 1.2 Befestigungsschraube losen 1.3 Frontbaugruppe herausnehmen und Steckverbinder zur Grundleiterplatte losen 2 Grundleiterplatte von der Ruckseite entriegeln (mit geeignetem Schraubendreher) und nach hinten aus dem Gehause herausziehen. 3 Einstellungen auf der Grundleiterplatte vornehmen (siehe Bild 3) 4 Grundleiterplatte wieder einsetzen und verriegeln 5 Frontbaugruppe wieder einsetzen und befestigen (Steckverbinder beachten). 5.3 Frontfolie beschriften Die Frontfolie kann entnommen und anwendungsspezifisch beschriftet werden. Hierzu Folie nach unten herausziehen (Pinzette oder kleine Zange), beschriften und wieder einsetzen. SIPART DR22/DR24 C79000-M7474-C38-02 5 Montage- und Installationshinweise 5.4 Module einsetzen Die Module werden von der Ruckseite in das Gerat eingesetzt und verriegelt. Achtung: - Steckplatze siehe Bild 3 - Steckplatze sind codiert. - Steckplatzbelegung und Zuweisung der Ein- und Ausgange erfolgt uber die Programmierung. Mogliche Steckplatzbelegung: Steck- Wirkung platz 1 -------2 AE4 3 AE5 4 SES 5 AE9 bis AE11 AA7 bis AA9 BE5 bis BE7 AA7 und St BE5 bis BE9 BA9 bis BA12 und BE5 bis BE6 BA9 bis BA10 AE6 bis AE8 AA4 bis AA6 BE10 bis BE12 AA4 und St BE10 bis BE14 BA13 bis BA16 u. BE10 bis BE11 BA13 bis BA14 6 Modul Hauptleiterplatte 6DR2800-8J U/I-Modul 6DR2800-8R R-Modul 6DR2800-8V UNI-Modul (TC/RTD/R/mV) (6DR2800-8P Pt100-Modul 6DR2800-8T TC-Modul*) 6DR2800-8J U/I-Modul 6DR2800-8R R-Modul 6DR2800-8V UNI-Modul (TC/RTD/R/mV) (6DR2800-8P Pt100-Modul 6DR2800-8T TC-Modul) *) 6DR2803-8P Profibus-DP-Modul 6DR2803-8C RS232/RS485-Modul 6DR2800-8A 3 x U/I-Modul 6DR2802-8B 3 x AA-/ 3 x BE-Modul oder oder oder oder oder oder oder oder oder oder oder 6DR2802-8A 6DR2801-8C 6DR2801-8E y-hold-Modul 5 BE-Modul 4 BA/2BE-Modul oder oder oder 6DR2801-8D 6DR2800-8A 6DR2802-8B 2 BA Relais-Modul 3 x U/I-Modul 3 x AA/3 x BE-Modul oder oder 6DR2802-8A 6DR2801-8C 6DR2801-8E y-hold-Modul 5 BE-Modul 4 BA/2BE-Modul oder oder oder 6DR2801-8D 2 BA Relais-Modul *) Wir empfehlen, bevorzugt das UNI-Modul 6DR2800-8V einzusetzen. 6 SIPART DR22/24 C79000-M7474-C38-02 Montage- und Installationshinweise 6 Mechnischer Einbau 238 72 130 278 max. 40 Relaisbaugruppe 6DR2804-8A/B 144 223 8 435 72,5+1 Zahl der Gerate Ausschnittbreite b 145 68+0,7 b 2 3 4 : : : 10 140 +1 212 +1 284 +1 716 +1 138+1 Bild 5 Abmessungen und Tafelausschnitt Vorgehensweise: 1. Schieben Sie den Regler von vorn in den vorbereiteten Tafelausschnitt ein. 2. Rasten Sie die beiden Spannstucke in die dafur vorgesehenen Offnungen auf der Reglerober- und Reglerunterseite ein. 3. Drehen Sie die Gewindestangen in den Spannstucken solange ein, bis der Regler sicher in der Tafel befestigt ist. SIPART DR22/DR24 C79000-M7474-C38-02 7 Montage- und Installationshinweise 7 Elektrischer Anschlu 7.1 Beschaltung Grundgerat Bild 6 8 Blockschaltbild SIPART DR22 SIPART DR22/24 C79000-M7474-C38-02 Montage- und Installationshinweise Bild 7 Blockschaltbild SIPART DR24 SIPART DR22/DR24 C79000-M7474-C38-02 9 Montage- und Installationshinweise Hinweise: - Die Schraubklemmenblocke zum Anschlu der Prozesignale an den Regler sind steckbar. - AE1 bis AE3: potentialfrei, zulassige Gleichtaktspannung 10V - AA1 bis AA3, BE und BA: potentialgebunden, bezogen auf M - S-Regler: Die Schaltausgange der S-Regler sind mit folgenden BA fest verschaltet: 6DR2210 S-Regler I S-Regler II +Dy auf BA7 (Klemme 1/10) +Dy auf BA5 (Klemme 1/8) --Dy auf BA8 (Klemme 1/11) --Dy auf BA6 (Klemme 1/9) +Dy auf BA5 +Dy auf BA7 +Dy auf BA3 +Dy auf BA1 --Dy auf BA6 --Dy auf BA8 --Dy auf BA4 --Dy auf BA2 6DR2410 S-Regler, Block h01.F S-Regler, Block h02.F S-Regler, Block h03.F S-Regler, Block h04.F 7.2 (Klemme 1/8) (Klemme 1/10) (Klemme 1/6) (Klemme 1/4) (Klemme 1/9) (Klemme 1/11) (Klemme 1/7) (Klemme 1/5) Verhalten des Gerates nach dem Zuschalten der Netzspannung ! WARNUNG Bei Inbetriebnahme des Gerates konnen, je nach Konfigurierung und letzter Betriebsart, Stellgroen ausgegeben werden, die Storungen im aktuellen Proze hervorrufen konnten. Bei sicherheitsrelevanten Anlagen sollten Sie vor dem ersten Einschalten des Netzes Informationen uber die Konfigurierung und letzte Betriebsart des Gerates einholen. Bei "SIPART DR22" und "SIPART DR24 konfiguriert als Regler" nehmen Sie unmittelbar nach dem ersten Einschalten des Netzes den "Regler" in "Hand" und verfahren den Stellwert y auf die gewunschte Groe. Erst danach schalten Sie auf "Automatik" um. Werkseinstellung (Lieferzustand): SIPART DR2210: Festwertregler mit cP = 0,1 und Tn = 9994,5 SIPART DR2410: ohne Anwenderprogramm. Gerat zeigt die Meldung "APST MEM" 7.3 Beschaltung Signalumformer Beschaltung der Signalumformer gema Handbuch (siehe Kapitel 2.2) 10 SIPART DR22/24 C79000-M7474-C38-02 Montage- und Installationshinweise 7.4 Gerat an die Versorgungsspannung anschlieen D 6DR2210-5/ 6DR2410-5 (AC 230 V/115 V, Rangierung Netz beachten) Kaltgeratestecker pro Gerat T1A IEC 320 IV DIN 49457A L N 230 115 ~ PE L N weitere Verbraucher des gleichen Kreises; ggf. Sicherung vergroern PE 115 V oder 230 V AC Bild 8 + 24 V + 5V UREF = 6DR2210-5 6DR2410-5 Alternativ Beschaltung Hilfsenergie 230 V/115 V D 6DR2210-5/ 6DR2410-4 (UC 24 V) 2 pol. Spezialstecker Polung beliebig pro Gerat T3,15 A ~ + 24 V + 5V UREF 24 V UC Bild 9 ! weitere Verbraucher des gleichen Kreises; ggf. Sicherung vergroern = 6DR2210-4 6DR2410-4 Beschaltung Hilfsenergie 24 V WARNUNG Zur Gewahrleistung der hohen elektromagnetischen Vertraglichkeit (EMV) mu die Schutzleiterschraube (Erdungsschraube 8, Bild 2) mit der Masse der Anlage (Schrank, Erdungsschiene) verbunden werden. Diese Verbindung mu auch fur hohe Frequenzen niederohmig sein (Cu-Band oder HF-Litze, mindestens 2,5 mm2). SIPART DR22/DR24 C79000-M7474-C38-02 11 Montage- und Installationshinweise 12 SIPART DR22/24 C79000-M7474-C38-02 Assembly and Installation Information Contents Seite 1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3 Scope of Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4 Important Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 5 5.1 5.2 5.3 5.4 Before Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching mains voltage 230 VX/115 VX . . . . . . . . . . . . . . . . . . . . Switching AE1 to AE3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Labelling the Front Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Insertion of Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 16 17 17 18 6 Mechanical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 7 7.1 7.2 7.3 7.4 Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wiring the basic device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Device Response after Switching on the Power Supply . . . . . . . Wiring the Signal Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connect Device to the Supply Voltage . . . . . . . . . . . . . . . . . . . . . . 20 20 22 22 23 1 General Information The assembly and installation information will enable you to perform the set-up and the electrical connections on the basic device. Further information about parameterization and structuring as well as the wiring of the signal converter can be found in the handbooks for the SIPART DR22 and SIPART DR24. The manuals can be ordered from a Siemens office with the following order numbers: SIPART DR22 SIPART DR24 englisch deutsch englisch deutsch C79000-G7476-C154 C79000-G7400-C154 SIPART DR22/DR24 C79000-M7474-C38-01 C79000-G7476-C153 C79000-G7400-C153 13 Assembly and Installation Information 2 Safety Information ! WARNING The comments and warnings given in these instructions contain important information on the product and must be strictly observed for safe operation. The device may not be connected if it shows signs of external damage. When the device is operating electrical equipment, certain parts of the device are unavoidably under dangerous voltage. Non-observance of the warnings can result in serious injury or damage to equipment. Therefore only qualified personal should work with this device. 3 Scope of Supply The following items are supplied: - 1 controller corresponding to the order 1 power supply connector 230 V/115 V or one special connector for auxiliary power UC 24 V 2 clamping elements, pluggable 1 assembly and installation information multi-pin screw-type terminal blocks for process signals Basic device: Order number 6DR2210-4 6DR2210-5 Power supply UC 24 V AC 230 V/115 V switchable 6DR2410-4 6DR2410-5 UC 24 V AC 230 V/115 V switchable Signal converter: Signal converters have separate order and delivery details. For processing reasons, it is possible that basic devices and signal converters that have been ordered together will be delivered separately. 14 SIPART DR22/DR24 C79000-M7474-C38-01 Assembly and Installation Information 4 Important Technical Data Mounting position Any Climatic class of application during operation 3k3 DIN/IEC 721 T3-3 Permissible environmental temperature during operation 0 to 50C Protection category according to Operating and display unit Housing / terminal clamps EN 60529 IP 64 IP30 / IP20 Dimensions See "Mechanical Installation" Power supply AC (switchable) 115 V ~/ 230 V~ 15% 47 to 63 Hz Max. power consumption 15 W / 19 VA Power supply UC 24 V =/~ DC 20 to 28 V AC 24 V~ 15%; 47 to 63 Hz Analog inputs AE1 to AE3 Current rated signal range control range input resistance common-mode voltage Isolated up to 10 V Voltage rated signal range input resistance 0/4 to 20 mA -1 to 21 mA 49.9 Ohm 0 to +10 V 0/199.6 to 998 mV or 0/2 to 10 V > 200 KOhm Analog outputs AA1 to AA3 rated signal range load voltage Non-floating 0/4 to 20 mA From -1 to 18V Binary inputs signal state 0 signal state 1 static destruct limit Non-floating 4.5 V 13 V 35 V Binary outputs signal state 0 signal state 1 load current Non-floating 1.5 V +19 to 26 V 50 mA Controller design - in accord. with EN 61010 part 1 - Protection category I according to IEC 536 - Outputs are small function voltages CE marking EC Conformity Declaration no. DR22/24-2/98 SIPART DR22/DR24 C79000-M7474-C38-01 15 Assembly and Installation Information 5 Before Installation 5.1 Switching mains voltage 230 V~/115 V~ The 6DR2210-5 and 6DR2410-5 devices can be switched from 230 V to 115 V. Switching is carried out on the rear side with a suitable screwdriver (power supply selector switch). Factory setting: 230V 1 Legend: 1 ground conductor - contact 12 11 2 10 9 8 spring slot 6 slot 5 slot 1 (main circuit board) slot 2 slot 3 slot 4 (SES: RS 232/ RS485, PROFIBUS DP) 8 grounding screw 9 DIN rail (supplied with the connecting relay) 10 power supply selector switch 11 power plug 12 power unit 2 3 4 5 6 7 3 Figure 2 7 6 5 4 Figure 3 Rear view, slots and connection plugs 16 SIPART DR22/DR24 C79000-M7474-C38-01 Assembly and Installation Information 5.2 Switching AE1 to AE3 The inputs AE1 to AE3 can be switched on the main circuit board. The following ranges are possible: 1V, 10V, I (20 mA). Factory setting: I (20 mA) 1V 10V I AE3 1V 10V I AE2 1V 10V I AE1 Factory setting I (0 to 20 mA) Main circuit board C73451-A3001-L32 Figure 4 Switching on the main circuit board Procedure: 1 1.1 1.2 1.3 2 3 4 5 5.3 Remove front module. Remove the cover of the measuring position shield Loosen the retaining screw Remove the front module and loosen the plug-in connector to the main circuit board Unlock the main circuit board from the rear side (with a suitable screwdriver) and pull out backwards from the housing. Change the settings on the main circuit board (see Figure 3) Insert main circuit board and lock. Insert the front module and secure (remember the plug-in connector). Labelling the Front Mask The front mask can be removed and labelled with the specific application. To do this, pull the mask down (tweezers or small pliers), label, and replace. SIPART DR22/DR24 C79000-M7474-C38-01 17 Assembly and Installation Information 5.4 Insertion of Modules The modules are inserted from the rear side of the device and locked. Important: - See Figure 2 for the slots. - The slots are coded. - The slot layout and the allocation of the inputs and outputs are assigned by programming. Possible slot layout: Slot 1 2 Action -------AE4 3 AE5 4 SES 5 AE9 to AE11 AA7 to AA9 BE5 to BE7 AA7 and St BE5 to BE9 BA9 to BA12 and BE5 to BE6 BA9 to BA10 AE6 to AE8 AA4 to A6 BE10 to BE12 AA4 and St BE10 to BE14 BA13 to BA16 and BE10 to BE11 BA13 to BA14 6 Module main circuit board 6DR2800-8J U/I module 6DR2800-8R R module 6DR2800-8V UNI module (TC/RTD/R/mV) (6DR2800-8P Pt100 module 6DR2800-8T TC module) *) 6DR2800-8J U/I module 6DR2800-8R R module 6DR2800-8V UNI module (TC/RTD/R/mV) (6DR2800-8P Pt100 module 6DR2800-8T TC module *) 6DR2803-8P Profibus DP module 6DR2803-8C RS232/RS485 module 6DR2800-8A 3 x U/I module 6DR2802-8B 3 x AA/ 3 x BE module or or or or or or or or or or or 6DR2802-8A y-hold module 6DR2801-8C 5 BE module 6DR2801-8E 4 BA/2BE module or or or 6DR2801-8D 2 BA relay module 6DR2800-8A 3 x U/I module 6DR2802-8B 3 x AA/3 x BE module or or 6DR2802-8A y-hold module 6DR2801-8C 5 BE module 6DR2801-8E 4 BA/2BE module or or or 6DR2801-8D 2 BA relay module *) We recommend the installation of the UNI module 6DR2800-8V. 18 SIPART DR22/DR24 C79000-M7474-C38-01 Assembly and Installation Information 6 Mechanical Installation 238 max. 40 72 130 278 Relay module 6DR2804-8A/B 144 223 8 435 72,5+1 Number of instruments 145 68+0,7 b 2 3 4 : : : 10 Cut-out width b 140 +1 212 +1 284 +1 716 +1 138+1 Figure 5 Dimensions and panel opening Procedure: 1. 2. 3. Push the controller from the front into the prepared panel opening. Click the two holding clamps into the openings provided on the top- and underside of the controller. Tighten the threaded rods in the clamps until the controller is secured in the panel. SIPART DR22/DR24 C79000-M7474-C38-01 19 Assembly and Installation Information 7 Electrical Connection 7.1 Wiring the basic device Figure 6 Block diagram SIPART DR22 20 SIPART DR22/DR24 C79000-M7474-C38-01 Assembly and Installation Information Figure 7 Block diagram SIPART DR24 SIPART DR22/DR24 C79000-M7474-C38-01 21 Assembly and Installation Information Information: - Plug-in screw terminal blocks are provided for the connection of the process signals to the controller. - AE1 to AE3: potential--free, permissible common-mode voltage 10V - AA1 to AA3, BE und BA: potential-bound, relative to M - S controller: The switching outputs of the S controller are hard-wired with the following BA: 6DR2210 S controller I S controller II +Dy on BA7 (terminal 1/10) +Dy on BA5 (terminal 1/8) --Dy on BA8 (terminal 1/11) --Dy on BA6 (terminal 1/9) +Dy on BA5 +Dy on BA7 +Dy on BA3 +Dy on BA1 --Dy on BA6 --Dy on BA8 --Dy on BA4 --Dy on BA2 6DR2410 S controller, block h01.F S controller, block h02.F S controller, block h03.F S controller, block h04.F 7.2 (terminal 1/8) (terminal 1/10) (terminal 1/6) (terminal 1/4) (terminal 1/9) (terminal 1/11) (terminal 1/7) (terminal 1/5) Device Response after Switching on the Power Supply ! WARNING When starting-up the device, depending on the configuration and the last type of operation, it is possible that values will be output that could cause malfunctions in the current process. With installations where safety is important, information about the configuration and the last type of operation should be recorded before switching on the power for the first time. If the device is "SIPART DR22" or "SIPART DR24 configured as a controller", switch the "controller" to "manual" mode and alter the variable y to the required value, immediately after switching the power on for the first time. Only then switch over to "automatic" mode. Factory setting (mode of delivery): SIPART DR2210: Fixed setpoint controller with cP = 0.1 and Tn = 9994.5 SIPART DR2410: Without user program. Controller displays the message "APST MEM" 7.3 Wiring the Signal Converter The signal converter is wired according to the manual (see chapter 2.2). 22 SIPART DR22/DR24 C79000-M7474-C38-01 Assembly and Installation Information 7.4 Connect Device to the Supply Voltage D 6DR2210-5 6DR2410-5 (A C230 V/115 V ) Power supply connector per device T1A IEC 320 IV DIN 49457A 230 115 ~ L N PE L N Other users on the same circuit; increase fuse power slightly PE 115 or 230 V AC + 24 V + 5V UREF = 6DR2210-5 6DR2410-5 Alternativ Figure 8 Wiring of the auxiliary power supply 230 V/115 V D 6DR2210-4 6DR2410-4 (UC 24 V) Double-pole special plug; any polarity per device T3,15A ~ + 24 V + 5V UREF Other users on the same circuit; increase fuse power slightly 24 V UC = 6DR2210-4 6DR2410-4 Figure 9 Wiring of the auxiliary power supply 24 V ! WARNING To guarantee high electromagnetic compatibility (EMC), the ground conductor screw (grounding screw 8, Figure 2) must be connected to the ground of the equipment (cupboard, grounding rails). This connection must also be low-ohm for high frequencies (Cu band or HF litz wire, at least 2.5 mm2). SIPART DR22/DR24 C79000-M7474-C38-01 23 Assembly and Installation Information 24 SIPART DR22/DR24 C79000-M7474-C38-01 Siemens AG Bereich Automatisierungs- und Antriebstechnik Geschaftsgebiet Prozessinstrumentierung- und Analytik D-76181 Karlsruhe Siemens Aktiengesellschaft E Siemens AG 1998 All rights reserved Order No. C79000-M7474-C38 Printed in France