IEC Inlet Filters FN 9244E Excellent Performance IEC Inlet Filter with Earth Line Choke n n n n n n Rated currents up to 15A Superior attenuation performance Integrated earth line choke Optional medical versions (B type) according to IEC/EN 60601-1 Snap-in versions (S and S1 type) Hot inlet versions (HI type) Technical specifications Maximum continuous operating voltage: Operating frequency: Rated currents: Approvals by rated current: High potential test voltage: Protection category: Temperature range (operation and storage): Design corresponding to: Flammability corresponding to: MTBF @ 40C/230V (Mil-HB-217F): Approvals Typical electrical schematic 250VAC, 50/60Hz dc to 400Hz 1 to 15A @ 50C 1 to 10A (ENEC, CQC) 1 to 15A (UL, CSA) P -> PE 2000VAC for 2 sec (standard types) P -> PE 2500VAC for 2 sec (B types) P -> N 1000VAC for 2 sec IP40 according to IEC 60529 -25C to +85C (25/85/21) UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 UL 94V-2 or better 2,230,000 hours Features and benefits Cx R 2xL1 2xCy N N` PE PE P` P Line Load L2 Typical applications Superior conducted attenuation n Electrical and electronic equipment IEC inlet and mains filter with superior performance, based on chokes with high n Small to medium-sized machines and filter attenuation in a small form factor. saturation resistance and excellent thermal The FN 9244E high performance power behavior. The FN 9244E IEC inlet filter combines an n household equipment n Single-phase power supplies, switch-mode entry module offers additional EMI sup- n Rear/front or snap-in mounting. pression on the earth line. Choosing the n Without earth line choke see FN 9244 data n Test and measurement equipment sheet. n Medical devices (MDD) Optional medical versions (B type) comply n In-vitro diagnostic medical devices (IVDD) with the necessary safety acceptances. with the requirements of IEC/EN 60601-1 n Rack mounting equipment Standard IEC connector filters are a practi- for creepage and clearance, leakage FN 9244E product line brings you the rapid availability of a standard filter associated n current and high potential testing. cal solution helping you to pass EMI system approval in a short time. A wide selection n Wide mounting flanges available. on amperage ratings, output connections, n Custom-specific versions are available on mounting possibilities and filters for medical applications are designed to offer you the desired solution. For types without additional earth line choke please consult the FN 9244 data sheet. request. power supplies > Components > FN 9244E Filter selection table Filter Rated current @ 50C (25C) Leakage current* @ 250VAC/50Hz FN 9244Ex-1-06 FN 9244Ex-3-06 FN 9244Ex-6-06 FN 9244Ex-8-06 FN 9244Ex-10-06 FN 9244Ex-12-06 FN 9244Ex-15-06 FN 9244Ex-12-06HI FN 9244Ex-15-06HI [A] 1 (1.2) 3 (3.5) 6 (7.2) 8 (10.6) 10 (11.6) 12 (12) 15 (15) 12 (12) 15 (15) [A] 373 373 373 373 373 373 373 373 373 [mH] 59.53 13.45 4.1 2.3 1.02 0.58 0.4 0.58 0.4 [mH] 0.335 0.6 0.9 1.0 1.0 1.1 1.2 1.1 1.2 [F] 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 FN 9244ExR-1-06 FN 9244ExR-3-06 FN 9244ExR-6-06 FN 9244ExR-8-06 FN 9244ExR-10-06 FN 9244ExR-12-06 FN 9244ExR-15-06 FN 9244ExR-12-06HI FN 9244ExR-15-06HI 1 (1.2) 3 (3.5) 6 (7.2) 8 (10.6) 10 (11.6) 12 (12) 15 (15) 12 (12) 15 (15) 373 373 373 373 373 373 373 373 373 59.53 13.45 4.1 2.3 1.02 0.58 0.4 0.58 0.4 0.335 0.6 0.9 1.0 1.0 1.1 1.2 1.1 1.2 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 1000 1000 1000 1000 1000 1000 1000 1000 1000 -06 -06 -06 -06 -06 -06 -06 -06 -06 46 46 46 46 46 46 46 46 46 FN 9244ExB-1-06 FN 9244ExB-3-06 FN 9244ExB-6-06 FN 9244ExB-8-06 FN 9244ExB-10-06 FN 9244ExB-12-06 FN 9244ExB-15-06 FN 9244ExB-12-06HI FN 9244ExB-15-06HI 1 (1.2) 3 (3.5) 6 (7.2) 8 (10.6) 10 (11.6) 12 (12) 15 (15) 12 (12) 15 (15) 2 2 2 2 2 2 2 2 2 59.53 13.45 4.1 2.3 1.02 0.58 0.4 0.58 0.4 0.335 0.6 0.9 1.0 1.0 1.1 1.2 1.1 1.2 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 1000 1000 1000 1000 1000 1000 1000 1000 1000 -06 -06 -06 -06 -06 -06 -06 -06 -06 46 46 46 46 46 46 46 46 46 * Inductance L1 L2 Capacitance Cx Cy Resistance Output connections R [nF] [k] 2.2 -06 2.2 -06 2.2 -06 2.2 -06 2.2 -06 2.2 -06 2.2 -06 2.2 -06 2.2 -06 Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. Product selector FN 9244Exx-yy-..HI-zz Snap-in range for S version only Blank: Snap-in range 0.7 to 1.5mm 20: Snap-in range 1.5 to 2.2mm Blank: Standard IEC inlet type C14 HI: Hot IEC inlet type C16 (12 and 15A types only) 06: Faston 6.3 x 0.8mm (spade/soldering) 1 to 15: Rated current Blank: Standard version R: Bleed resistor B: Medical version (with bleed resistor and without Y2-capacitor) Blank: Standard housing with mounting flanges U: Housing with wider mounting flanges S: Snap-in version, snapper on vertical side S1: Snap-in version, snapper on horizontal side For example: FN 9244E-15-06, FN 9244ES1B-10-06-20, FN 9244ER-12-06HI, FN 9244EUB-8-06 Weight [g] 46 46 46 46 46 46 46 46 46 > Components > FN 9244E Typical filter attenuation Per CISPR 17; A = 50/50 sym; B = 50/50 asym; C = 0.1/100 sym; D = 100/0.1 sym 1 and 3A types 6 to 10A types 12 and 15A types Mechanical data FN 9244E FN 9244E-HI B B IEC plug type C14 6.3 x 0.8 IEC plug type C16 A C E A C J E H F G D I B 6.3 x 0.8 A G A J F D 6.3 x 0.8 C14 E Installation B T C14 6.3 x 0.8 S C J E H F G Panel cut out M R D I A C14 J E G I FN 9244EU C F G FN 9244ES1 B P J H I D FN 9244ES N 6.3 x 0.8 S S F D I > Components > FN 9244E Dimensions FN 9244E FN 9244EU FN 9244ES FN 9244ES1 FN 9244E-HI A 48 51.85 29.9 29.9 48 B 22.5 25 22.4 22.4 22.5 C 40 0.2 40 0.2 40 0.2 D 46.8 46.8 46.8 46.8 46.8 E 27.8 27.8 27.8 27.8 27.8 F 5.5 5.5 5.5 5.5 5.5 G 20.1 20.1 20.1 20.1 20.1 H O3.3 O3.3O3.3 I 14 14.1 14 14 14 J 13.3 13.3 13.3 13.3 13.3 M R3 R3 R 1.5 R 1.5 R3 N 21.5 21.5 20.8 21.9 21.5 P 28.5 28.5 29.4 28.5 28.5 R M3 M3M3 S 90 9090 T* 0.7 - 1.5 0.7 - 1.5 T* 1.5 - 2.2 1.5 - 2.2 * For selecting the panel thickness, please refer to the filter selector table. All dimensions in mm; 1 inch = 25.4mm Tolerances according: ISO 2768-m / EN 22768-m Your local partner: To find your local partner within Schaffner's global network, please go to www.schaffner.com May 2011 Headquarters and global innovation and development center Schaffner Group Nordstrasse 11 4542 Luterbach Switzerland T +41 32 681 66 26 F +41 32 681 66 30 info@schaffner.ch www.schaffner.com Sales and application centers China Schaffner EMC Ltd. Shanghai Building 11, Lane 1365 East Kangqiao Road Shanghai 201319 T +86 21 6813 9855 F +86 21 6813 9811 cschina@schaffner.com www.schaffner.com Germany Schaffner Deutschland GmbH Schoemperlenstrasse 12B 76185 Karlsruhe T +49 721 56910 F +49 721 569110 germanysales@schaffner.com Finland Schaffner Oy Tynninkuja 7 08700 Lohja T +358 19 35 72 71 F +358 19 32 66 10 finlandsales@schaffner.com France Schaffner EMC S.A.S. 112, Quai de Bezons 95103 Argenteuil T +33 1 34 34 30 60 F +33 1 39 47 02 28 francesales@schaffner.com Italy Schaffner EMC S.r.l. Via Galileo Galilei, 47 20092 Cinisello Balsamo (MI) T +39 02 66 04 30 45/47 F +39 02 61 23 943 italysales@schaffner.com Japan Schaffner EMC K.K. Mitsui-Seimei Sangenjaya Bldg. 7F 1-32-12, Kamiuma, Setagaya-ku Tokyo 154-0011 T +81 3 5712 3650 F +81 3 5712 3651 japansales@schaffner.com www.schaffner.jp Sweden Schaffner EMC AB Turebergstorg 1, 6 19147 Sollentuna T +46 8 5792 1121 / 22 F +46 8 92 96 90 swedensales@schaffner.com Switzerland Schaffner EMV AG Nordstrasse 11 4542 Luterbach T +41 32 681 66 26 F +41 32 681 66 41 sales@schaffner.ch To find your local partner within Schaffner`s global network, please go to Singapore Schaffner EMC Pte Ltd. Blk 3015A Ubi Road 1 05-09 Kampong Ubi Industrial Estate T +65 6377 3283 F +65 6377 3281 singaporesales@schaffner.com (c) 2011 Schaffner EMC. Specifications subject to change without notice. All trademarks recognized. Spain Schaffner EMC Espana Calle Calendula 93, Miniparc III, Edificio E El Soto de la Moraleja, Alcobendas 28109 Madrid T +34 618 176 133 spainsales@schaffner.com Taiwan Schaffner EMV Ltd. 6th Floor, No 413 Rui Guang Road Neihu District Taipei City 114 T +886 2 87525050 F+886 2 87518086 taiwansales@schaffner.com Thailand Schaffner EMC Co. Ltd. Northern Region Industrial Estate 67 Moo 4 Tambon Ban Klang Amphur Muang P.O. Box 14 Lamphun 51000 T +66 53 58 11 04 F +66 53 58 10 19 thailandsales@schaffner.com UK Schaffner Ltd. 5 Ashville Way Molly Millars Lane Wokingham Berkshire RG41 2PL T +44 118 9770070 F +44 118 9792969 uksales@schaffner.com www.schaffner.uk.com USA Schaffner EMC Inc. 52 Mayfield Avenue Edison, New Jersey 08837 T +1 732 225 9533 F +1 732 225 4789 usasales@schaffner.com www.schaffner.com/us www.schaffner.com May 2011 Schaffner is an ISO-registered company. Its products are designed and manufactured under the strict quality and environmental requirements of the ISO 9001 and ISO 14001 standards. This document has been carefully checked. However, Schaffner does not assume any liability for errors or inaccuracies.