Ordering number:ENN2159B PNP/NPN Epitaxial Planar Silicon Transistors 2SA1518/2SC3912 Switching Applications (With Bias Resistance) Application Package Dimensions * Switching circuits, inverters circuits, inferface circuits, driver circuits. unit:mm 2018B [2SA1518/2SC3912] 0.4 * On-chip bias resistance : R1=10k, R2=10k. * Small-sized package : CP. * Large current capacity : IC=500mA. 0.16 0 to 0.1 0.8 1.1 1 0.95 0.95 2 1.9 2.9 0.5 1.5 2.5 3 0.5 Features 1 : Base 2 : Emitter 3 : Collector SANYO : CP ( ) : 2SA1518 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (-)50 V Collector-to-Emitter Voltage VCEO VEBO (-)50 V (-)10 V IC (-)500 mA Peak Collector Current ICP (-)800 mA Collector Dissipation PC 200 mW 150 C -55 to +150 C Emitter-to-Base Voltage Collector Current Junction Temperature Tj Storage Temperature Tstg Electrical Characteristics at Ta = 25C Parameter Collector Cutoff Current Symbol Conditions Ratings min typ max Unit ICBO VCB=(-)40V, IE=0 (-)0.1 A ICEO VCE=(-)40V, IB=0 (-)0.5 A Emitter Cutoff Current IEBO VEB=(-)5V, IC=0 (-)360 A DC Current Gain hFE VCE=(-)5V, IC=(-)10mA fT VCE=(-)10V, IC=(-)5mA Gain-Bandwidth Product Output Capacitance Cob (-)195 (-)250 50* VCB=(-)10V, f=1MHz 250 MHz (200) MHz 3.7 pF (5.5) pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 53002RM (KT)/71598HA (KT)/3307KI/8196AT, TS No.2159-1/3 2SA1518/2SC3912 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage Ratings Conditions min VCE(sat) IC=(-)20mA, IB=(-)1mA V(BR)CBO IC=(-)10A, IE=0 V(BR)CEO IC=(-)100A, RBE= Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Input OFF-State Voltage VI(off) VI(on) Input ON-State Voltage Input Resistance R1 Resistance Ratio R1/R2 typ Unit max (-)0.1 (-)0.3 V (-)50 V (-)50 VCE=(-)5V, IC=(-)100A VCE=(-)0.2V, IC=(-)10mA V (-)0.8 (-)1.1 (-)1.5 (-)1.0 (-)2.0 (-)4.0 7 10 13 0.9 1.0 1.1 V V k Marking 2SA1518 : LL, 2SC3912 : TY Electrical Connection Collector (OUTPUT) Collector (OUTPUT) R1 R1 Base (INPUT) Base (INPUT) R2 R2 Emitter (GND) Emitter (GND) 2SA1518 : PNP hFE -- IC 5 DC Current Gain, hFE 2 VCE=5V R1=10k R2=10k 2SA1518 / 2SC3912 2 100 7 5 3 2 10 7 5 2 3 5 7 2 10 3 5 7 100 Collector Current, IC - mA Collector Current, IC - A 7 2SA1518 / 2SC3912 100 7 5 3 2 10 3 ITR03839 5 (For PNP, minus sign is omitted.) 7 1.0 2 3 5 7 10 2 3 5 7 100 Collector Current, IC - mA 2 3 ITR03840 IC -- VI(off) 2 1000 2 VCE=0.2V R1=10k R2=10k 7 (For PNP, minus sign is omitted.) 7 1.0 VI(on) -- IC 3 Input ON Voltage, VI(on) - V 3 2SC3912 : NPN VCE=5V R1=10k R2=10k 5 3 2 100 7 5 3 2 2SA1518 / 2SC3912 (For PNP, minus sign is omitted.) 10 7 0.8 0.9 1.0 1.1 1.2 Input OFF Voltage, VI(off) - V 1.3 1.4 ITR03841 No.2159-2/3 2SA1518/2SC3912 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 2002. Specifications and information herein are subject to change without notice. PS No.2159-3/3