AMPTRAC Intelligent Infrastructure
Management System (IIMS)
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
ii
25 Year System Performance Coverage*
The AMPTRAC System provides the same 25-year electrical and optical data-carrying performance
warranty as standard AMP NETCONNECT cabling systems. The AMPTRAC components provide
the following coverage:
AMPTRAC Patch panels and I/O cables – 25 years
AMPTRAC Patch Cords – 25 years
AMPTRAC Sensor Strips – 5 years
AMPTRAC Analyzers – 1 year (optional 3-year extended warranty available)
AMPTRAC IM Software – 1 year Service Level Agreement
25 Year System Performance Coverage*
We are condent that your AMP NETCONNECT cabling system will keep performing to current
TIA/EIA industry standards. If the registered system ever fails to meet those standards within 25
years of the date of installation, we’ll provide the reasonable parts and labor to replace or repair the
AMP NETCONNECT product.*
It’s Standard Equipment
This coverage is automatically part of the package when*:
⦿AMP NETCONNECT products are specied end-to-end
⦿A Tyco Electronics authorized NETCONNECT Design & Installation (ND&I) contractor registers the network project with Tyco Electronics
⦿That ND&I performs the actual installation in accordance with Tyco Electronics requirements
Who’s Covered
Unlike most systems suppliers, Tyco Electronics provides warranty coverage directly to the end user. Many suppliers
provide coverage to the installers, who then provide coverage to the customer. But with Tyco Electronics warranties,
there are no middlemen. The warranties are between you and Tyco Electronics.
For more information, please visit: http://www.tycoelectronics.com/aboutus/pdf/tc.pdf
Or call: 1-800-553-0938
Outside the U.S., please contact your local AMP NETCONNECT product sales ofce.
People & Products to Answer the Cabling Challenge.
Cabling a retail store, casino or ofce building can be complex. Yet the solution for productive connectivity and cable
management can be as simple as talking to the right people - The AMP NETCONNECT business unit of Tyco Elec-
tronics.
The reason is what we bring to the building infrastructure challenges you face. In-depth technical knowledge and ex-
pertise from decades of experience. Innovative technologies from ongoing R&D. And quality products for every power,
data, voice and video networking need. One of the broadest lines in the industry, in fact.
Additionally, it’s what we do to answer the challenge: develop and deliver integrated, made-to-order solutions that
optimize network performance, increase productivity and produce more immediate return-on-investment.
And it’s not just providing technology. It’s making sure solutions are efciently and effectively installed: working with
distributors and customers so products are delivered when and where you need them. And maintaining a global net-
work of certied installation contractors.
It all means, simply, that AMP NETCONNECT cabling systems provide the answers you’re looking for: the whole solu-
tion for any cabling challenge. From the ground up.
*Conditions apply. AMP NETCONNECT Home Net-Works Systems qualify for a 25 year component warranty only. For more information, please visit www.ampnetconnect.com or call 1-800-553-
0938. Outside the U.S., please contact your local AMP NETCONNECT product sales ofce.
A
M
P
N
E
T
C
O
N
N
E
C
T
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
ITRACS IS A TRADEMARK OF ITRACS CORPORATION.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
Intelligent Infrastructure Management System
AMPTRAC IIMS Information...................................................................02
iTRACS® Infrastructure Manager™ Software Information .....................03
AMPTRAC Analyzers .............................................................................04
AMPTRAC Twisted Pair Patch Panels ...................................................05
AMPTRAC MRJ21 Patch Panels ...........................................................06
AMPTRAC Patch Panel Retrot Kits ......................................................07
AMPTRAC I/O Cable Management Brackets .........................................07
AMPTRAC Optical Fiber Patch Panels and Accessories .......................08
AMPTRAC Optical Fiber Adapter Plates, Cassettes and Accessories
for Optical Fiber Enclosures ................................................................08
AMPTRAC LAN Electronics Sensor Strips .............................................09
AMPTRAC Twisted Pair Patch Cable Assemblies ..................................10
AMPTRAC Optical Fiber Patch Cable Assemblies .................................11
AMPTRAC I/O Interface Adapter and 110 Plug and Play Kit ..................11
AMPTRAC Analyzer I/O Cable Assemblies ....................................12 – 13
iTRACS® Intelligent Infrastructure Management Software ............14 – 15
The requirements of today’s rapidly growing and changing
infrastructures are no longer satised by traditional IT
infrastructure management but need intelligent, real-time
management. An Intelligent Infrastructure Management System
(IIMS) is critical to providing accurate cable and network
management information into the IT Infrastructure Library (ITIL).
The AMPTRAC Connectivity Management System turns
cabling systems and their connected devices into
intelligent networks by reducing costly and time-consuming
manual cable management. With this system, you can
track and document all moves, adds and changes to your
network from a centralized location as they occur. This fully
automated system optimizes asset utilization, maintains
accurate documentation and helps prevent costly errors.
The AMPTRAC Connectivity Management System’s easy-
to-implement hardware coupled with iTRACS IM cutting-
edge software can be integrated into new or existing networks. By
allowing you to proactively respond to any changes in connectivity
through customizable alerts or alarms, the iTRACS software optimizes
your network monitoring and security. AMPTRAC hardware when
used in conjunction with iTRACS software provides the missing link
that integrates network management and physical layer management
– revolutionizing the way networks are controlled and documented.
This one-of-a-kind infrastructure management system automatically generates
a complete physical topology of your network at the Telecommunications
Room/Data Center, while helping you manage and troubleshoot the network remotely.
System Facts and Features
Summary
13
13-01
⦿Reduces downtime and
response time
⦿Integrates network and physical
layer management
⦿Helps to increase productivity
⦿Reduces operating costs
⦿Improves port and asset
utilization
⦿Provides accurate and timely
information
⦿Improves service levels
⦿Provides alerts and alarms for
all changes relating to devices
and their connectivity
⦿Provides work order control
module with auto-provisioning
⦿Over 60 detailed reports
available
⦿Audit trail based on historical
log le
⦿ Simplied installation and
design with stackable,
congurable Analyzer
⦿Complete product line support
⦿ XG Cat 6A shielded
⦿ Cat 6 unshielded
⦿ Fiber (SC and LC)
⦿ MPO (ber) and MRJ 21
(copper)
⦿ Analyzer LCD displays
work order and circuit trace
information
⦿Analyzer provides good and
bad audible tone alerts and
conrmations
⦿Analyzer generates remedial
work actions to x unauthorized
moves, adds and changes
⦿Support for non-English
languages
Intelligent Infrastructure Management System
13
13-02
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
ITRACS IS A TRADEMARK OF ITRACS CORPORATION.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
AMPTRAC Basic Operating Principle
⦿9th wire technology in patch cord establishes
open and closed circuit which can be monitored
⦿Analyzer monitors open/closed circuit and tracks
connectivity
⦿Analyzer sends data to iTRACS IM software
database
⦿iTRACS IM software sends work order and circuit
info to AMPTRAC Analyzer
AMPTRAC
Analyzer
AMPTRAC
Analyzer
Open Circuit
Closed Circuit
I/O Cables
I/O Cables
AMPTRAC
Patch Cable
AMPTRAC
Patch Cable
Switch
Port
Patch
Panel Port
Switch
Port
Patch
Panel Port
AMPTRAC
Analyzer
LAN 2
LAN 3
Status
Power
USB
LAN 1
Pen
Home
Esc
Enter
12
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
*0
AMPTRAC
Analyzer
LAN 2
LAN 3
Status
Power
USB
LAN 1
Pen
Home
Esc
Enter
12
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
*0
TCP/IP Network
iTRACS secure protocol
(on Ethernet)
AMPTRAC Server
Ethernet
AMPTRAC Patch Cable
AMPTRAC
I/O Cables
AMPTRAC Analyzer
AMPTRAC
Patch Panel
Switch with
AMPTRAC
Sensor Strip
AMPTRAC System and Components
⦿AMPTRAC Analyzer: The device that tracks
the connections between sensor contacts
and communicates with iTRACS IM software
database
⦿AMPTRAC I/O cables: Connects sensor
contacts (patch panel and electronics) to
analyzer
⦿AMPTRAC Patch Panels: Patch panels with
integrated sensor contacts
⦿AMPTRAC Sensor Strips: Sensor contacts
that are applied to network electronics port
elds
⦿AMPTRAC Patch Cords: Interconnects
between patch panel and switch ports which
have an integrated ‘9th’ wire that is used to
make connection between sensor contacts
⦿IM Software: The software that manages the
Analyzers, and correlates the connectivity
information from the analyzers to a database
model of the customer infrastructure
⦿AMPTRAC Server: A higher level PC (often
Rack mounted) that runs the iTRACS IM
software
Intelligent Infrastructure Management System Intelligent Infrastructure Management System
13
13-03
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
ITRACS IS A TRADEMARK OF ITRACS CORPORATION.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
The Product Design
iTRACS Infrastructure Manager software has been designed for customers of Tyco Electronics, as it functions in
tandem with AMPTRAC hardware. The software is designed to explore and discover and map the connectivity of
the customer network. It is further designed to simplify the process of all future moves, adds and changes (MACs)
of end-users. The software allows simultaneous access by a spectrum of department representatives; these include
help desk, planning, network administration, supervision and technicians.
The Client Customers - The Problems of Complex Networks - Solved
iTRACS IM software is ideally suited to customers with complex data/telecom networks and critical applications.
Examples include nancial institutions, insurance providers, data centers, high security government facilities, military
defense facilities, airports, medical centers, universities and corporate headquarters.
These customers and clients share the difcult management of complicated networks, requiring accurate record-
keeping, high security, and frequent MACs. The simplication of the work order process also provides valuable
benets to client networks of any size, from small to enterprise network.
Product Leadership
iTRACS IM Software, as one of the earliest developers of Cable Management Software (CMS), has maintained an
international leadership position in CMS design for more than 15 years. iTRACS IM software has been specically
designed to automate the MAC record maintenance process, to simplify the user interface and to share access
across departments.
Ask for a demonstration today!
iTRACS® Infrastructure Manager™ Software –
Software for the AMPTRAC Connectivity Management System
Circuit trace from end-to-end
and all points in between
Custom views based on
job responsibilities
Data store information
Work area indicated
in graphic view.
Enterprise display Switch and Patch Panel
Ports in Closet View
Intelligent Infrastructure Management System
13
13-04
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
ITRACS IS A TRADEMARK OF ITRACS CORPORATION.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
AMPTRAC Analyzers
⦿Universal analyzer design
⦿Analyzer can be
congured as a master or
slave
⦿Any unit can directly
communicate to database
server or through another
analyzer
⦿Virtually unlimited in
number of ports/drops
which can be monitored
⦿Highly exible design and
implementation allowing for
use in ofce buildings, data
centers and remote/branch
ofces
⦿Analyzer sold with license
to iTRACS IM software (see
pages 12 and 13 of this
chapter for description of
software)
⦿Available in 336-port and
168-port versions:
⦿ Both use 1U of rack space
⦿Positive, keyed and reliable
DB25 connection for I/O
cables
⦿Shallow depth at 6.25” (160
mm)
⦿Suitable for shelve or 19” rack
or cabinet mounting
⦿Large 4 line LCD display
providing interactive
communications with the
database
⦿Supports connection of PDA,
electronic tablet or computer
to analyzer via Ethernet port
The AMPTRAC Connectivity Management System
Analyzer discovers connects/disconnects and
communicates the port ID information in real-time
to the AMPTRAC database software over a TCP-IP
connection. When a patch cord is inserted or removed
from a port, the AMPTRAC sensory circuit immediately
notifies the database software to update and document
the change in connectivity. This provides network
administrators responsible for small to enterprise wide
multi-site networks, with vital time saving up to-the
minute information about the status of their network from
the hardware layer up. Any change in connectivity can
be checked and authorization verified, and if appropriate,
action taken if the action is unauthorized.
Front with Included
Accessories
Back
Description Ports Monitored Part Number
Analyzer, US Power Cord with iTRACS IM Software and 1 Year Service Level Agreement 336 3-1591309-1
168 4-1591309-1
Extended 3-Year Analyzer Warranty - 9-1591306-0
Note: A complete channel connection to a work area outlet passes through two monitored ports, the network switch and the patch panel.
Therefore, each active channel monitored requires two Analyzer ports.
⦿Three 10/100BASE-Tx
Ethernet ports provided (1
in front, 2 in rear) to provide
connection to LAN and server
as well as allow analyzer to
communicate via another
analyzer
⦿Use of latest and current
circuitry design
⦿Little heat generation —
no concerns over heat
management in rack or
cabinet
Enhancements
⦿AMPTRAC Analyzer provides
work order information on the
LCD screen
⦿Provides a “good or bad” tone
from analyzer based on work
order information
⦿Generates remedial
work actions for repair of
unauthorized changes
⦿Supports character based
language
Intelligent Infrastructure Management System
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
13
13-05
A
Standard
C
Standard
E
Standard
B
Standard
B
Angled
D
Angled
F
Angled
A
Angled
C
Angled
E
Angled
AMPTRAC Twisted Pair Patch Panels
⦿Incorporates integrated
solid contacts for enhanced
protection, appearance, and
reliability
⦿I/O cable connection made
via 110 IDC punch down
in the rear of patch panel,
minimizing pre-planning and
allowing for cables to be cut to
length (1435844) or with 110
plug and play cable assembly
(1933152) (see page 10)
⦿ Cost-effective solution for
AMPTRAC Connectivity
Management System ready
solution - install AMPTRAC
patch panels now and
analyzer, I/O cables, and
software later
⦿Available in straight versions
as well as angled versions for
improved cable and space
management
⦿Uses AMP NETCONNECT
high-performance AMP-
TWIST shielded 6A and SL
Series Cat 6 UTP modular
jacks
D
Standard
F
Standard
Description Port Count Height - Rack Units (Inches) Figure Footprint
Standard Angled
XG Cat 6A (Shielded) 24 1U (1.75) A1933331-1 1933333-1
48 2U (3.50) B1933332-1 1933334-1
Category 6 (Unshielded) 24 1U (1.75) C1933327-1 1933329-1
48 2U (3.50) D1933328-1 1933330-1
SL Series Multimedia (without jacks)* 24 1U (1.75) E1933323-1 1933325-1
48 2U (3.50) F1933324-1 1933326-1
NOTE: Previous versions of AMPTRAC SL Patch Panels require I/O cable 1499656-X instead of new version 1933152-X.
*NOTE: SL Series multimedia panels do not accept dust-covered jacks
⦿AMP-TWIST shielded
6A modular jacks meets
or exceeds the channel
specications of ANSI/TIA-
568-C.2 Category 6A and
Amendment 1 to ISO/IED
11801:2002 Class EA up
to 500 MHz when used as
a component in a properly
installed
AMP NETCONNECT XG F/
UTP channel
⦿ AMP-TWIST shielded 6A
modular jacks meet or exceed
all requirements for IEEE
802.3an 10 Gigabit Ethernet
⦿ XG Cat 6A and Cat 6 patch
panels come unloaded
with modular jacks bagged
separately for eld termination
with SL Series modular jack
termination tool P/N: 172150
(see Chapter 22)
⦿SL Series multimedia patch
panels come unloaded and
accept SL Series jacks for
custom congurations
⦿For compatible cable
management products, see
Chapter 15
Intelligent Infrastructure Management System
13
13-06
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, MRJ21, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
Footprint RJ-45 Ports MRJ21 Connectors Per Port Wiring (Applications) Figure Part Number
Standard
24 4 4-Pair (10/100/1000BASE-T) A1777029-2
48 4 2-Pair (10/100BASE-T) B1777042-1
8 4-Pair (10/100/1000BASE-T) C1777041-1
Angled 48 8 4-Pair (10/100/1000BASE-T) D1777053-1
AMPTRAC MRJ21 Patch Panels
⦿High-performance copper
cabling solution
⦿High-density, small form factor
connectivity
⦿Factory terminated and tested
⦿Modular, pluggable design
⦿4-Pair MRJ21 patch panels
support applications which
use four or fewer pairs
including 10BASE-T,
100BASE-T and 1000BASE-T
⦿2-Pair MRJ21 patch panels
support applications which
use two or fewer pairs
including 10BASE-T, and
100BASE-T
⦿Utilizes HD22 interface
for AMPTRAC I/O cable
(1499507) (see page 10)
⦿For compatible cable
management products, see
Chapter 15
C
B
D
D
Back
C
Back
B
Back
A
A
Back
Intelligent Infrastructure Management System
13
13-07
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, MRJ21, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
AMPTRAC Patch Panel Retrofit Kits
⦿Kits are designed to retrot
the AMPTRAC Connectivity
Management System to
existing installations of
AMP NETCONNECT SL
Series standard unshielded,
110Connect patch panels, or
angled and standard MRJ21
patch panels
A
B
D
C
For Use With Fitted Ports I/O Interface Figure Part Number
110Connect (Cat 5 or 5e) Straight Patch Panels 24 2.0 mm AMPMODU A1499639-1
SL Series (Cat 5e or 6) Straight Patch Panels 24 2.0 mm AMPMODU A1499640-1
MRJ21 Angled Patch Panels 48 HD22 B1479853-1
MRJ21 Straight Patch Panels 48 HD22 C1479951-1
24 HD22 D1479894-1
Description Width Figure Part Number
Universal Bracket
40 mm A1499659-1
100 mm B1499659-2
448 mm C1499659-3
AMPTRAC I/O Cable Management Brackets
A B
C
⦿Universal brackets provide
support for I/O cable
assemblies
⦿Adjustable
⦿Utilize existing patch panel
mounting hardware
⦿SL Series and 110Connect
kits contain material to retrot
24 ports; two kits are required
for a 48-port patch panel
⦿MRJ21 kits contain materials
to retrot 24- or 48-port patch
panels as listed
Intelligent Infrastructure Management System
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
13
13-08
AMPTRAC Optical Fiber Patch Panels and Accessories
AMPTRAC Optical Fiber Adapter Plates, Cassettes and Accessories for Optical Fiber Enclosures
⦿Available in XG (850 nm LO
50 µm) multimode (OM3) and
single-mode
⦿Support for eld termination
with interface module or
preterminated use with MPO
cassettes
⦿AMPTRAC LC duplex
systems use modied ber
enclosures listed below
⦿Available in XG OM3 (850 nm
LO 50 µm) multimode and
single-mode
⦿Support for eld termination
with adapter plate or
preterminated use with MPO
cassettes
Description Type Maximum AMPTRAC Module/AMPTRAC
Cassette Capacity
Maximum Fiber/Duplex
Port Capacity Figure Part Number
AMPTRAC Optical
Fiber Patch Panels
1U Drawer 4 of: 1933420, 1499647 or 1499649
(each sold separately) 48-fibers/24 duplex ports A1933443-1
4U Enclosure 12 of: 1933420, 1499647 or 1499649
(each sold separately) 144-fibers/72 duplex ports B1435593-2
Connector
Type Description Fiber
Count
Duplex
Port
Count AMPTRAC I/O Interface Fiber Type Figure Part Number
Duplex LC
AMPTRAC Interface
Modules†12-Fiber 6-Port‡IDC or 110 Plug & Play
(1435844/1933152)
XG OM3 50 µm C1933420-2
Single-mode 1933420-3
AMPTRAC MPO
Cassettes†12-Fiber 6-Port‡6-Position Mod Plug (RJ-11)
(1499684)
XG OM3 50 µm D1499647-2
Single-mode 1499649-2
†NOTE: AMPTRAC duplex LC require use of above drawer (1933443) or enclosure (1435593).
‡NOTE: Adapters inserts included
Description Connector
Type
Fiber
Count
Duplex
Port Count
AMPTRAC I/O
Interface Fiber Type Figure Part Number
AMPTRAC Snap-in Adapter
Plates Duplex SC 12-Fiber 6-Ports 6-Position 2.54 MTE
(1499685)
Multimode A1435657-1
Single-mode 1435657-2
AMPTRAC MPO Cassettes Duplex SC 12-Fiber 6-Ports 6-Position 2.54 MTE
(1499685)
XG OM3 50 µm 1435688-2
Single-mode B1435689-2
AMPTRAC Snap-in Adapter
Plate Retrot Kit For Adapter Plate 559596 6-Position 2.54 MTE
(1499685) –C1435685-1
Note: AMPTRAC Duplex SC Snap-in Adapter Plate and MPO Cassettes use standard ber enclosures in Chapter 15
D
Back
RJ-11
MPO
A
C
AC
B
D
B ⦿Duplex LC AMPTRAC
interface modules are not
included with 1933443 or
1435593 enclosures
⦿AMPTRAC XG 50 µm (OM4)
MPO cassettes also available
⦿AMPTRAC optical ber patch
panels only accept AMPTRAC
duplex LC modules and
cassettes listed below
⦿AMPTRAC duplex SC adapter
plates and MPO cassettes
(Figures A and B) use
standard
AMP NETCONNECT
enclosures in chapter 15
Intelligent Infrastructure Management System
13
13-09
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, AMPMODU, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
⦿Sensor strips are readily
available for a number of LAN
electronic equipment types
⦿All sensor strips are Printed
Circuit Board (PCB) with 2.0
mm AMPMODU connector.
⦿Custom sensor strips can be
designed to work with most
LAN electronic equipment.
For assistance, call AMP
NETCONNECT customer
service at 1-800-553-0938
Description of Equipment # of Ports # Ports per Group # of Port Groups Part Number
Twisted Pair Equipment
AMPNETCONNECT 50-port Telephone Patch Panel 50 50 1 1435954-1
Nortel Baystack 470-48T Ethernet Switch 48 16 3 1435939-1
CISCO 4000 and 6000 Blades (48-Port) 48 12 4 1499651-1
Nortel Baystack 5520 Ethernet Routing Switch 48 12 4 1499660-1
CISCO WS-3750-48 and WS-C2960G-48 Switches 48 16 3 1499798-1
AMP NETCONNECT 48-port 1U Patch Panel (1933458-1) 48 12 4 1499970-1
Alcatel Omni OS6800-48L Switch 48 12 4 2111101-1
CISCO WS-C2950SX-24/26 Switch 26 8 3 1435827-1
CISCO 4000 and 6000 Blades (48-Port);
Nortel 5520-24T Ethernet Switch 24 12 2 1435346-1
CISCO WS-C2950-48 and C3560-48 Switch;
Nortel 5520-24T Switch 24 16-8 2 1435346-4
CISCO 3500-24 Switch 24 12 2 1435346-5
Nortel Baystack 450-24T Ethernet Switch 24 12 2 1435933-1
Alcatel 6600-24 Switch 24 12 2 1777005-1
Nortel Passport 8648 Ethernet Switch 24 16-8 2 1777014-1
Extreme Summitt 400 Switch 24 8 3 1933067-1
Tyco Electronics 24-port Switch (1591099-x) 24 8 3 1933184-1
CISCO 48-port Blades (3 groups of 16) 24 16-8 2 1933228-1
CISCO WS-3560-24PS Switch 24 12 2 1933430-1
Generic 24-port; Rigid Flex (6 over 6) 24 12 2 1933737-1
CISCO 4948 Switch 24 16-8 2 1933850-1
CISCO WS_C2960-24PC Switch;
HP Procurve J8720A Switch 24 12 2 1933899-1
Extreme Summitt 481 (1433) Switch 16 8 2 1435927-1
Exterasys Switches 16 16 1 1499759-1
Exterasys 1H-16TX Module 16 16 1 1933053-1
Generic 16-port; Rigid Flex (8 over 8) 16 16 1 2111168-1
Extreme Summitt 1i, 5i and Alpine 3808 Switches 12 X X 1435952-1
Generic 12-port; Rigid Flex (6 over 6) 12 12 1 1777019-1
CISCO WS-3750G-24S Switch 12 12 1 1499800-1
CISCO 2960-24TC and 2960-48-TC Switches 12 12 1 1933241-1
HP Procurve J4111A Switch 8 8 1 1933098-1
Optical Fiber Equipment
CISCO 48 and 24-port LC Blade X6748-SFP) 48 4 12 1933361-1
CISCO 3750-24FS (MTRJ) Switch 24 24 1 2111149-1
CISCO 24-port MT-RJ Blade (X6324-100-FX) 24 24 1 1435937-1
CISCO 16-port Duplex SC Blade 16 8 2 1435820-1
CISCO 12-port LC Switch (S-3750-12S) 12 4 3 1499795-1
CISCO 8-port LC Blade (SUP32-GE-3B) 8 8 1 1933358-1
CISCO 4-port LC Uplink 4 4 1 1499794-1
Generic 2-port, Duplex SC Uplink 2 2 1 1933875-1
CISCO 2-port LC Uplink (2950) 2 2 1 1933180-1
CISCO 2-port LC Uplink (3750) 2 2 1 1499799-1
Alcatel 2-port LC Uplink (6648) 2 2 1 1479889-1
1479889-2
CISCO 2-port Uplink (2950) 2 2 1 1435950-1
CISCO Dual Duplex SC Uplink (3550) 2 2 1 1435818-1
AMPTRAC LAN Electronics Sensor Strips
⦿Equipment manufacturer,
model number, and model
revision are required in
determining the selection of
the proper sensor strip
⦿Sensor strips contain an
adhesive backing for easy
installation
Intelligent Infrastructure Management System
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
13
13-10
External Probe
AMPTRAC Category 6, Unshielded Patch Cable Assemblies
Wiring
Jacket
Color
Boot
Color
Length
3 ft [0.91 m] 5 ft [1.52 m] 7 ft [2.13 m] 10 ft [3.04 m] 14 ft [4.26 m] 16 ft [4.87 m] 25 ft [7.62 m]
Universal
Black Black 1435864-3 1435864-5 1435864-7 1-1435864-0 1-1435864-4 1-1435864-6 2-1435864-5
Gray Gray 1435835-3 1435835-5 1435835-7 1-1435835-0 1-1435835-4 1-1435835-6 2-1435835-5
Blue Blue 1435861-3 1435861-5 1435861-7 1-1435861-0 1-1435861-4 1-1435861-6 2-1435861-5
Green Green 1435860-3 1435860-5 1435860-7 1-1435860-0 1-1435860-4 1-1435860-6 2-1435860-5
Red Red 1435862-3 1435862-5 1435862-7 1-1435862-0 1-1435862-4 1-1435862-6 2-1435862-5
White White 1435834-3 1435834-5 1435834-7 1-1435834-0 1-1435834-4 1-1435834-6 2-1435834-5
Yellow Yellow 1435863-3 1435863-5 1435863-7 1-1435863-0 1-1435863-4 1-1435863-6 2-1435863-5
Orange Orange
1435918-3 1435918-5 1435918-7 1-1435918-0 1-1435918-4 1-1435918-6 2-1435918-5
Violet Violet 1435919-3 1435919-5 1435919-7 1-1435919-0 1-1435919-4 1-1435919-6 2-1435919-5
Crossover Red Black 1435953-3 1435953-5 1435953-7 1-1435953-0 1-1435953-4 1-1435953-6 2-1435953-5
AMPTRAC XG Category 6A, Shielded Patch Cable Assemblies
Wiring
Jacket
Color
Boot
Color
Length
3 ft [0.91 m] 5 ft [1.52 m] 7 ft [2.13 m] 10 ft [3.04 m] 14 ft [4.26 m] 16 ft [4.87 m] 25 ft [7.62 m]
Universal White White 1499740-3 1499740-5 1499740-7 1-1499740-0 1-1499740-4 1-1499740-6 2-1499740-5
⦿Meets or exceeds Category 6
performance specications
⦿Cat 6A shielded assembly
meets or exceeds the channel
specications of ANSI/TIA-
568-C.2 Category 6A and
Amendment 1 to ISO/IED
11801:2002 Class EA up
to 500 MHz when used as
a component in a properly
installed AMP NETCONNECT
XG F/UTP channel
⦿Cat 6A shielded assembly
meets or exceeds all
requirements for IEEE
802.3an 10 Gigabit Ethernet
⦿Patch cable assemblies
contain 9th conductor that is
connected to external probe
molded into the modular plug
boot
⦿Backward compatibility
permits assemblies to support
new or existing Category 5e
systems
⦿External probe makes contact
with sensor pad on the sensor
strip and/or patch panel
sensor contact
⦿Off-center probe designed to
accommodate stacked-jack
LAN switch congurations
⦿Non-plenum jacketing, CMR
rated
⦿Color matched over-molded
snagless boots
⦿Crossover patch cable
assemblies are unshielded
with red cable jacketing and
black over-molded boots
White AMPTRAC
Patch Cable Assembly
AMPTRAC Twisted Pair Patch Cable Assemblies
Intelligent Infrastructure Management System
13
13-11
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, AMPMODU, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
⦿Meets or exceeds optical
performance specications for
XG OM3 (850 nm LO 50 µm)
multimode and single-mode
⦿Duplex SC and duplex LC
assemblies available
⦿Patch cable assemblies
contain copper conductor that
is connected to external probe
⦿External probe makes contact
with sensor pad on the sensor
strip and/or patch panel
sensor contact
Connector
End 1 Connector
End 2 Fiber Type Length
1 m [3.28 ft] 2 m [6.56 ft] 3 m [9.84 ft] 5 m [16.40 ft] 7 m [22.96 ft] 10 m [32.80 ft]
Duplex SC Duplex SC XG OM3 50 µm 1435725-1 1435725-2 1435725-3 1435725-5 1435725-7 1-1435725-0
Single-mode 1435726-1 1435726-2 1435726-3 1435726-5 1435726-7 1-1435726-0
Duplex SC Duplex LC XG OM3 50 µm 1435796-1 1435796-2 1435796-3 1435796-5 1435796-7 1-1435796-0
Single-mode 1435797-1 1435797-2 1435797-3 1435797-5 1435797-7 1-1435797-0
Duplex LC Duplex LC XG OM3 50 µm 1435790-1 1435790-2 1435790-3 1435790-5 1435790-7 1-1435790-0
Single-mode 1435791-1 1435791-2 1435791-3 1435791-5 1435791-7 1-1435791-0
NOTE: AMPTRAC XG OM4 50 µm cable assemblies also available.
Duplex SC Duplex LC
AMPTRAC Optical Fiber Patch Cable Assemblies
Description Part Number
AMPTRAC I/O Interface Adapter, DB25 to 2.0 mm AMPMODU Connector 1499641-1
Description Part Number
AMPTRAC I/O Interface, 110 Plug and Play Kit 1933151-1
⦿For use with 2.0 mm
connectors less than 24
position
⦿Allows for side-by-side
connections of multiple 2.0
mm AMPMODU connectors
⦿Allows for use of all analyzer
ports
⦿Built-in strain relief and cable
management
⦿Used with I/O cable assembly
part number 1435844 (use
4 per assembly) for custom
length
⦿Easy to lace and eld
terminate (no special tools
required)
⦿Built-in latches and orientation
features
Back Detail
24 Position, 2.0 mm
AMPMODU Connector
Assembled Kit
AMPTRAC I/O Interface Adapter, DB25 to 2.0 mm AMPMODU Connector
AMPTRAC I/O Interface, 110 Plug and Play Kit
⦿One wire/one probe design to
monitor duplex ber port as a
single connection
⦿OFCR riser rated and listed
cable
⦿Cable is a mini-tri-zip design
for exibility and small size
Intelligent Infrastructure Management System
13
13-12
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, AMPMODU, MRJ21, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
PCB Sensor
Application Connector Conductor
Count Length Part Number
End 1 End 2
LAN Switches 2.0 mm 2.0 mm 2
4 ft [1.22 m] 1499690-4
7 ft [2.13 m] 1499690-7
10 ft [3.05 m] 1-1499690-0
14 ft [4.27 m] 1-1499690-4
25 ft [7.62 m] 2-1499690-5
50 ft [15.24 m] 5-1499690-0
75 ft [22.86 m] 7-1499690-5
100 ft [30.48 m] 9-1499690-9
2.0 mm
(End 2)
2.0 mm
(End 1)
⦿AMPTRAC connectivity management system I/O cable assemblies are available with the following connectors:
⦿DB25 connector (on analyzer)
⦿110 Plug and Play connector (on AMPTRAC SL Series patch panels) and duplex LC interface modules
⦿HD22 connector (on MRJ21 patch panels)
⦿2.0 mm AMPMODU connector (used with the analyzer DB25 adapter 1499641-1)
⦿ 2.0 mm AMPMODU connector (on sensor strips)
⦿6-position modular plug (RJ11) (LC duplex MPO cassettes)
⦿6-position 2.54 MTE connector (on duplex SC adapter plates and MPO cassettes)
⦿All I/O cables come with molded boots on the analyzer connector end
⦿I/O cable assemblies are non-plenum (CM rated) and UL Listed
AMPTRAC SL Series and AMPTRAC Optical Fiber Patch Panels
Application Connector Conductor
Count Length Part Number
End 1 End 2
Cat 6A Shielded
Cat 6 Unshielded
Duplex LC
DB25 -
Analyzer
None - used
with IDC 24
7 ft [2.13 m] 1435844-7
14 ft [4.27 m] 1-1435844-4
50 ft [15.24 m] 5-1435844-0
100 ft [30.48 m] 9-1435844-9
110 Plug &
Play 24
4 ft [1.22 m] 1933152-4
7 ft [2.13 m] 1933152-7
10 ft [3.05 m] 1-1933152-0
14 ft [4.27 m] 1-1933152-4
25 ft [7.62 m] 2-1933152-5
50 ft [15.24 m] 5-1933152-0
75 ft [22.86 m] 7-1933152-5
100 ft [30.48 m] 9-1933152-9
AMPTRAC Analyzer I/O Cable Assemblies
DB25
(End 1) For use with
IDC (End 2)
110 Plug & Play
(End 2)
MRJ21 Patch Panels
Application Connector Conductor
Count Length Part Number
End 1 End 2
MRJ21 Patch Panels DB25 -
Analyzer HD22 24
4 ft [1.22 m] 1499507-4
7 ft [2.13 m] 1499507-7
10 ft [3.05 m] 1-1499507-0
14 ft [4.27 m] 1-1499507-4
25 ft [7.62 m] 2-1499507-5
50 ft [15.24 m] 5-1499507-0
75 ft [22.86 m] 7-1499507-5
100 ft [30.48 m] 9-1499507-9
DB25
(End 1)
HD22
(End 2)
Intelligent Infrastructure Management System Intelligent Infrastructure Management System
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
13
13-13
PCB Sensor
Application Connector Length Conductor Count
End 1 End 2 6 8 12 16
LAN Switches 2.0 mm* 2.0 mm
4 ft [1.22 m] 1499689-4 1499688-4 1499687-4 1499686-4
7 ft [2.13 m] 1499689-7 1499688-7 1499687-7 1499686-7
10 ft [3.05 m] 1-1499689-0 1-1499688-0 1-1499687-0 1-1499686-0
14 ft [4.27 m] 1-1499689-4 1-1499688-4 1-1499687-4 1-1499686-4
25 ft [7.62 m] 2-1499689-5 2-1499688-5 2-1499687-5 2-1499686-5
50 ft [15.24 m] 5-1499689-0 5-1499688-0 5-1499687-0 5-1499686-0
75 ft [22.86 m] 7-1499689-5 7-1499688-5 7-1499687-5 7-1499686-5
100 ft [30.48 m] 9-1499689-9 9-1499688-9 9-1499687-9 9-1499686-9
*NOTE: Use with DB25 Adapter P/N: 1499641-1 to connect monitored device to AMPTRAC Analyzer.
AMPTRAC LC MPO Cassettes, AMPTRAC LC Duplex Adapter Plates
Application Connector Conductor
Count Length Part Number
End 1 End 2
Duplex LC 2.0 mm* 6-Position, RJ11 6
4 ft [1.22 m] 1499684-4
7 ft [2.13 m] 1499684-7
10 ft [3.05 m] 1-1499684-0
14 ft [4.27 m] 1-1499684-4
25 ft [7.62 m] 2-1499684-5
50 ft [15.24 m] 5-1499684-0
75 ft [22.86 m] 7-1499684-5
100 ft [30.48 m] 9-1499684-9
*NOTE: Use with DB25 Adapter P/N: 1499641-1 to connect monitored device to AMPTRAC Analyzer.
PCB Sensor
Application Connector Conductor
Count Length Part Number
End 1 End 2
LAN Switches DB25 -
Analyzer 2.0 mm 24
4 ft [1.22 m] 1435845-4
7 ft [2.13 m] 1435845-7
10 ft [3.05 m] 1-1435845-0
14 ft [4.27 m] 1-1435845-4
25 ft [7.62 m] 2-1435845-5
50 ft [15.24 m] 5-1435845-0
75 ft [22.86 m] 7-1435845-5
100 ft [30.48 m] 9-1435845-9
DB25
(End 1)
2.0 mm
(End 2)
2.0 mm
(End 1 & 2)
2.0 mm
(End 1)
RJ11
(End 2)
AMPTRAC Analyzer I/O Cable Assemblies
Duplex SC
Application Connector Conductor
Count Length Part Number
End 1 End 2
Duplex SC Adapter Plates
and MPO Cassettes 2.0 mm* 6-Position
2.54 MTE 6
4 ft [1.22 m] 1499685-4
7 ft [2.13 m] 1499685-7
10 ft [3.05 m] 1-1499685-0
14 ft [4.27 m] 1-1499685-4
25 ft [7.62 m] 2-1499685-5
50 ft [15.24 m] 5-1499685-0
75 ft [22.86 m] 7-1499685-5
100 ft [30.48 m] 9-1499685-9
*NOTE: Use with DB25 Adapter P/N: 1499641-1 to connect monitored device to AMPTRAC Analyzer.
2.0 mm
(End 1)
2.54 MTE
(End 2)
Intelligent Infrastructure Management System
13
13-14
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
ITRACS IS A TRADEMARK OF ITRACS CORPORATION.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
iTRACS IM software has been designed to work with AMP NETCONNECT AMPTRAC Connectivity Management
System hardware. Together they create an automated, accurate, real-time physical layer management system. This
combined system proactively responds to changes in connectivity and intelligently records your cabling system
and its devices with accurate documentation. You reduce costs by eliminating time-consuming manual work order
processes. You also maximize your existing network investment by identifying under-utilized assets.
Work area indicated
in graphic view.
Circuit trace from end-to-end
and all points in between
Custom views based
on job responsibilities
Data store Information
Enterprise display
iTRACS® Intelligent Infrastructure Management Software
Switch and Patch Panel
Ports in Closet View
Intelligent Infrastructure Management System
13
13-15
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
ITRACS IS A TRADEMARK OF ITRACS CORPORATION.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
⦿Real-time monitoring - automates the process of discovering, documenting, monitoring, and managing the physical network’s connections
and its devices.
⦿Automatically updates the database - reports authorized or unauthorized changes in real time.
⦿Self-discover patching - discovers all iTRACS-enabled port connectivity.
⦿Event logs - whenever the system detects a connectivity change, it automatically creates an entry in an internal comprehensive log.
⦿Automated work order process - iTRACS Infrastructure Manager software provides a greatly automated work order system, to be shared by
the help desk, network/telecom managers and technicians. It is the simplest and most intelligent system available. Each user works from a
simple user interface, unique to their task.
⦿Access rights and privileges are determined by the administrator. Authorized users select proposed moves of workstations, phones, printers
or other equipment. Moves can be performed singly or in bulk, as in departmental relocation. The system automatically generates auto-
routing, and a step-by-step work order and schedule, which can be accepted or revised by the user. Tasks can be divided and distributed
between various supervisors and technicians via email. Work orders can include system diagrams and oor plans.
⦿When a work order is completed for an iTRACS IM software monitored port, the system record instantly updates, ensuring accurate
information. Should an unauthorized change occur, iTRACS IM software can generate a work order to reverse the unwanted action.
⦿For un-monitored ports, a simple verication by technical staff/management ensures that the work ow automatically updates the iTRACS IM
software database.
⦿The system can also generate comprehensive reports containing all work order details such as the author, status, creation and scheduled
dates, and notes.
⦿Terminal service - iTRACS IM software can be accessed via terminal service therefore allowing full functionality and viewing by remote users.
⦿Automatic re-synchronization - if a network outage should occur, the iTRACS IM Software database automatically re-synchronizes upon the
restoration of power, showing network asset connectivity changes.
⦿Security Features - iTRACS IM software distinguishes unauthorized changes from authorized ones.
⦿Alerts - receive a text message via email containing a pre-dened message.
⦿More detailed reports - iTRACS IM software provides a library of detailed reports of cable, port and asset utilization. These reports are
invaluable to network administrators and asset managers.
⦿Auto-routing - The system automatically generates suggested auto-routing, and a step-by-step work order and schedule, which can be
accepted or revised by the user.
IM Enhancements (9.1)
⦿Supports character based languages as well as Latin based
⦿Work order communicates with AMPTRAC analyzer LCD
⦿ODBC read-authorization
⦿Virtual machine support
Description Part Number
iTRACS IM Software with One-year Gold Plus Service Agreement Sold With Analyzer
iTRACS IM Software Concurrent User Pack (5 Additional Users) 1479979-1
iTRACS IM Gold Plus Service Agreement (1 Year Per Port) 1-1479977-1
iTRACS® Intelligent Infrastructure Management Software
NOTES
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
13-16
NOTES
1-800-553-0938
http://www.ampnetconnect.com
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, TE LOGO AND TYCO ELECTRONICS ARE TRADEMARKS.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
iii
Need more information?
Visit our web site at http://www.ampnetconnect.com
⦿Instruction Sheets ⦿Cut Sheets ⦿Authorized NETCONNECT Design and Installation (ND&I)
contractor listings
⦿Data Sheets ⦿White Papers ⦿Authorized AMP NETCONNECT product distributor listings
⦿AMP NETCONNECT product sales engineer contact listings
Send us an e-mail at networking.help@tycoelectronics.com
Give our customer service center (USA) a call: 1-800-553-0938
⦿Technical Support ⦿Order Literature ⦿Product Samples Obtain a Quote
⦿Place an Order ⦿Product Information ⦿Tyco Electronics Fax Service
Get Training - AMP NETCONNECT Product Training Services: 1-800-331-9857 ext 63809
⦿Designing LAN Cabling ⦿Installing and Connectorizing LAN Cabling
⦿Certifying and Troubleshooting LAN Cabling
Globally Connected for all your cabling needs
Americas Asia/Pacic Europe/Middle East/Africa
Argentina 54-11-4733-2200 Australia Armenia ................. 374-10-381083 Lithuania ............... 370-5-213-1402
Brazil................... 55 11 2103-6120 Sydney................ 61-2-9554-2600 Austria ................ 43-1-90560-1204 Luxemburg............ 31-73-6246-246
Canada ....................905-475-6222 Melbourne........... 61-3-9389-5677 Azerbaijan......... 49-6103-709-3301 Netherlands .......... 31-73-6246-246
Chile ........................56-2-3450347 Brisbane ............ 61-7-3623-0340 Belarus ..................375-172374794 Norway .................. 47-66-77-88-99
Colombia .................57-1-3198999 China Belgium................... 32-16-35-2190 Poland .................. 48-22-4576-700
Mexico ................52-55-1106-0800 Beijing ................ 86-10-65816181 Bulgaria ................ 359-2-971-2152 Portugal .............. 351-961-377-331
Peru .........................51-1-3197900 Chongqing ......... 86-23-89808860 Cyprus ................ 30-210-9370-396 Romania ............... 40-21-311-3479
United States ........1-800-553-0938 Guangzhou ........ 86-20-86672071
Czech Republic
... 420-5-41-162-112 Russia................... 7-495-790-7902
Venezuela ................ 57-1-3198999 Hong Kong........... 852-2735-1628 Denmark ................ 45-70-15-52-00 Slovakia ............. 420-5-41-162-112
Shanghai ........... 86-21-24071588 Egypt .................... 20-2-2419-2334 Slovenia ................ 385-1-3666-733
Shenzhen ........ 86-755-25154700 Estonia.................358-95-12-34-20 Spain .................... 34-93-291-0330
Wuhan .............. 86-27-68850166 Finland .................. 358-95-1234-20 Netherlands .......... 31-73-6246-211
Indonesia ............... 6221-526-7852 France .................... 33-1-3420-212 Norway ..................47-66-77-88-99
Japan Georgia ............. 49-6103-709-3301 Poland .................. 48-22-4576-700
Kawasaki ............ 81-44-844-8071 Germany ........... 49-6103-709-1547 Russia..................7-095-926-55-06
Osaka ................. 81-6-6533-8240 Greece ................ 30-210-9370-396 Spain .................... 34-93-291-0330
Korea .................... 82-2-3274-0535 Hungary .................. 36-1-289-1007 Sweden................. 46-8-5072-5000
Malaysia .................. 603-705-3055 India .................... 91-80-4011-5000 Switzerland ........... 41-71-447-0447
New Zealand Ireland................. 44-208-420-8140 Turkey ................. 90-212-281-8181
Auckland ............... 64-9-634-4580 Italy ...................... 39-011-4012-111
U.A.E. (United Arab Emirates)
... 971-4-3210201
Wellington ............. 64-4-384-1495 Kazasthan............. 7-327-244-5875 Ukraine ................. 380-44-206-226
Philippines ............... 632-848-0171 Latvia ................... 370-5-213-14-02 United Kingdom .... 44-208-420-8140
Singapore ...................65-482-0311 For Eastern European Countries not shown ............... 49-6103-709-1166
Taiwan ................. 886-2-87682788 For Middle East/African Countries not shown ................. 33-1-3420-2122
Thailand .................. 66-2-955-0500 For BeNeLux ....... 31-73-6246-246
Vietnam ................... 848-9305-546
1-82164-3-US-06/10
AMP, AMP NETCONNECT, NETCONNECT, AMPTRAC, MRJ21, AMPMODU, TE LOGO AND TYCO
ELECTRONICS ARE TRADEMARKS.
ITRACS IS A TRADEMARK OF ITRACS CORPORATION.
OTHER PRODUCTS, LOGOS AND COMPANY NAMES MENTIONED HEREIN MAY BE TRADEMARKS
OF THEIR RESPECTIVE OWNERS.
Tyco Electronics Corporation AMP NETCONNECT Global Offices:
North America
Harrisburg, PA, USA
Ph: +1-800-553-0938
Fx: +1-717-986-7406
Latin America
Buenos Aires, Argentina
Ph: +54-11-4733-2200
Fx: +54-11-4733-2282
Europe
Kessel-Lo, Belgium
Ph: +32-16-352-300
Fx: +32-16-352-353
Asia
Hongkong, China
Ph: +852-2735-1628
Fx: +852-2735-1625
Mid East & Africa
Cergy-Pontoise, France
Ph: +33-1-3420-2122
Fx: +33-1-3420-2268
Pacific
Sydney, Australia
Ph: +61-2-9407-2600
Fx: +61-2-9407-2519
Tyco Electronics Corporation AMP NETCONNECT North American Offices:
United States
Greensboro, NC, USA
Ph: +1-800-553-0938
Fx: +1-717-986-7406
Canada
Markham, Ontario, Canada
Ph: 905-475-6222
Fx: 905-474-5519
© 2009 – Tyco Electronics Corporation – All rights reserved
http://www.ampnetconnect.com
