www.irf.com 8
PIIPM15P12D007 I27179 22 - Sep
Switching Characteristics: Inverter and Brake
For proper operation the device should be used within the recommended conditions.
TJ = 25°C (unless otherwise specified)
Symbol Parameter Definition Min Typ Max Units Test Conditions Fig.
Qg Total Gate Charge (turn on) 84 127
Qge Gate – Emitter Charge (turn on) 10 15
Qgc Gate – Collector Charge (turn on) 43 64
nC
IC = 15A
VCC = 600V
VGE = 15V
23
CT1
Eon Turn on Switching Loss 838 1207 IC = 15A, VCC = 600V, TJ = 25 ºC CT4
Eoff Turn off Switching Loss 632 900 VGE = 15V, RG =10Ω, L = 500µH WF1
Etot Total Switching Loss 1470 2107
µJ
Tail and Diode Rev. Recovery included WF2
Eon Turn on Switching Loss 1154 1512
Eoff Turn off Switching Loss 933 1030
Etot Total Switching Loss 2087 2542
µJ
IC = 15A, VCC = 600V, TJ = 125 ºC
VGE = 15V, RG =10Ω, L = 500µH
Tail and Diode Rev. Recovery included
13,
15
CT4
WF1
WF2
td (on) Turn on delay time 98 104 14,16
Tr Rise time 14 25
IC = 15A, VCC = 600V, TJ = 125 ºC
CT4
td (off) Turn off delay time 132 142 WF1
Tf Fall time 226 247
ns
VGE = 15V, RG =10Ω, L = 500µH
WF2
Cies Input Capacitance 1323 VCC = 30V
Coes Output Capacitance 255 VGE = 0V
Cres Reverse Transfer Capacitance 37
pF
f = 1MHz
22
TJ = 150 ºC, I C =60A, VGE = 15V to 0V
RBSOA Reverse Bias Safe Operating Area FULL SQUARE
VCC = 1000V, Vp = 1200V, RG = 5Ω
4
CT2
TJ = 150 ºC, VGE = 15V to 0V CT3
SCSOA Short Circuit Safe Operating Area 10 µs
VCC = 1000V, Vp= 1200V, RG = 5Ω WF4
EREC Diode reverse recovery energy 711 1263 µJ TJ = 125 ºC
Trr Diode reverse recovery time 113 300 ns IF= 15A, VCC = 600V,
Irr Peak reverse recovery current 36 41 A VGE = 15V, RG =10Ω, L = 500µH
17,18
19,20
21
CT4
WF3
RthJ-C_T Each IGBT to copper plate thermal resistance 0.9 ºC/W
RthJ-C_D Each Diode to copper plate thermal resistance 1.54 ºC/W 25,26
RthC-H Module copper plate to heat sink thermal
resistance. Silicon grease applied = 0.1mm 0.03
ºC/W
See also fig. 25, 26
29 IC = 2A, VDC = 530V, fsw = 8kHz, TC = 55 ºC
42 IC = 3A, VDC = 530V, fsw = 8kHz, TC = 55 ºC
81 IC = 3A, VDC = 530V, fsw = 16kHz TC = 55 ºC,
Pdiss Total Dissipated Power
40
W
IC = 7A, VDC = 530V, fsw = 4kHz, TC = 55ºC
PD1
PD2
PD3