2 1/2" OPENING SPECIFICATIONS * 4 1/4" * * FRONT OPENING * * * * * Dual Card Badge Holder Material Thickness: .014" Center & .012" (3H) badge holders Material Tolerance (thickness): +/- 10% Material Color: White Suede center, clear pockets Includes a 1/8" x 9/16" punch through slot, and two 3/16" diameter hang holes located along the top Includes a 1/4" grommet to allow for badge holders to swivel out for card scanning 2 1/2" x 4 1/4" (Outer Dimensions) 2 1/4" x 3 1/2" (Insert Size) Embossed with Menda & Made In America along header Customs available Made in America Specifications and procedures subject to change without notice BACK MADE IN AMERICA BADGE HOLDER, DUAL CARDS, 2 1/4" x 3 1/2" INSERT SIZE Dimensional tolerances are +/- 1/16" unless specified 3651 WALNUT AVENUE, CHINO, CA 91710 PHONE: (909) 627-2453 FAX: (951) 755-8848 WEBSITE: Menda-ID.com (c) 2011 DESCO INDUSTRIES INC. Employee Owned DRAWING NUMBER 35007 DATE February 2011