Part Number 856690 756 MHz SAW Filter Data Sheet Features * * * * * * * * For WiMAX applications Usable bandwidth 10 MHz Typical bandwidth of 18.5 MHz Low loss Single-ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 3.80 x 3.80 x 1.27 mm SMP-15 Bottom View 1 2 3 0.61 8 4 1.27 NOM. 1.45 MAX. 3.80 1.27 3.80 7 6 5 Single-ended Configuration Pin No. Description 1 Input 5 Output 2,3,6,7 Ground 4,8 Case Ground 0.60 1.00 1.50 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev B 02/08 (c) TriQuint Semiconductor Page 1 of 5 Part Number 856690 756 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 C Parameter (3) Minimum Typical (4) Maximum Unit 761.0 - 756 1.9 746.7 765.3 18.5 2.5 751.0 - MHz dB MHz MHz - 0.1 1.0 dB p-p - 12 50 ns p-p 45 30 5 4 30 45 - 55 39 14 11 53 50 -38 50 50 - dB dB dB dB dB dB ppm/C Center Frequency Minimum Insertion Loss Lower 1 dB Band Edge (5) Upper 1 dB Band Edge (5) 1 dB Bandwidth Amplitude Variation 751 - 761 MHz Group Delay Variation 751 - 761 MHz Absolute Attenuation (5) 10 - 700 MHz 700 - 727 MHz 727 - 742 MHz 770 - 805 MHz 805 - 825 MHz 825 - 1000 MHz Temperature Coefficient of Frequency Source Impedance (single-ended) (6) Load Impedance (single-ended) (6) Notes: 1. All specifications are based on the TriQuint test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to minimum insertion loss 6. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 1 50 Single-ended Input Subject to change or obsolescence without notice 5 2,3,4 6,7,8 50 Rev B 50 02/08 (c) TriQuint Semiconductor 50 Single-ended Output Page 2 of 5 Part Number 856690 756 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev B 02/08 (c) TriQuint Semiconductor Page 3 of 5 Part Number 856690 756 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 1 50 Single-ended Input 5 2,3,4 6,7,8 50 50 Single-ended Output 50 Marking PCB Footprint 1.70 TriQuint logo 4.01 1.19 Marking code .81 14 .41 JJJYM .46 ID dot 1.19 Date code .81 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 2.7 12.8 O330 TriQuint logo 4.0 0.3 2.0 O1.5 A 1.75 5.5 4.1 Pad 1 ID dot O102 O20.2 O13.0 2.0 Direction of travel 1.8 Section A-A 4.1 8.0 O1.5 12.0 A Dimensions shown are nominal in millimeters Packaging quantity: 4000 units/reel Subject to change or obsolescence without notice Rev B 02/08 (c) TriQuint Semiconductor Page 4 of 5 Part Number 856690 756 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -40 -40 +85 +85 Unit o C C o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability * Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev B 02/08 Or contact one of our worldwide Network of sales offices, Representatives or distributors (c) TriQuint Semiconductor Page 5 of 5