1
POWER ENTRY MODULES WITH LINE FILTER
F
FK
KH
HD
D
[www.schurter.com]
Actual information about approvals can be found on
http://www.schurter.com/approvals
C14
70° C
D
De
es
sc
cr
ri
ip
pt
ti
io
on
n
- Panel mount:
Screw-on version from front side
- 4 Functions:
Connector Protection class I, Fuseholder for fuse-links 5 x 20 mm 1-
pole, Line switch 2-pole, Line-filter in standard version 2-stage
Quick connect terminals 6.3 x 0.8 mm
C
Ch
ha
ar
ra
ac
ct
te
er
ri
is
st
ti
ic
cs
s
- Compact design with optimal shielding
- All single elements are already wired
- The fuseholder is accessible from the equipment front
-Qualified for use in equipment according IEC/EN 60950
T
Te
ec
ch
hn
ni
ic
ca
al
l d
da
at
ta
a
Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz
Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 125 VAC; 60 Hz
Leakage current standard < 0.25 mA (250 V / 60 Hz)
Dielectric strength > 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (2 sec)
Allowable operation temp. -25 °C to 85 °C
Climatic category 25/085/21, IEC 60068-1
Degree of protection from front side IP40 acc. to IEC 60529
Protection class Suitable for appliances with protection
class I acc. to IEC 61140
Terminals Quick connect terminals 6.3 x 0.8 mm
Panel thickness s Screw-on max 8 mm
Mounting screw torque max 0.5 Nm
Materials: Housing Thermoplastic, black, UL 94V-0
Appliance-inlet /-outlet C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
condition) pin-temperature 70 °C, 10 A,
Protection class I
Fuseholder 1-pole, Shocksave category PC2 acc.
to IEC/EN 60127-6,
for fuse-links 5 x 20 mm
Power acceptance @ Ta >
23°C
Admissible power acceptance at higher
ambient temperature see derating cur-
ves. Take note of the information GE-
NERAL PRODUCT INFORMATION
Line switch Rocker switch 2-pole, non-illuminated,
acc. to IEC 61058-1
Technical details GENERAL PRO-
DUCT INFORMATION
Line filter Standard Version, IEC 60939, IEC
60601-1, UL 1283, UL 544, EN 133
200, CSA C22.2 no. 8
Technical details GENERAL PRO-
DUCT INFORMATION