5.13
Verotec Case: Accessories
CHASSIS TRAYS AND SUPPORT KITS
These are sold as separate items to give the maximum flexibility when creating
and internal tray within a Verotec case. Chassis tray supports are available in 4
depths each to suit the overall depth of the case they are fitted to.
Chassis trays are available in a range of depths and two widths 19inch and 10.5
inch. They are intended for the mounting of discreet components which would
not normally be mounted in a 19inch enclosure. If required, more than one tray
can be fitted to match the depth of the case, with a space to allow cables to be
passed between them.
CHASSIS TRAY SUPPORT KIT
ORDERING INFORMATION
CONTENTS OF KIT:
2off Chassis Tray Support - 1.2mm Galvanised Steel
4off Fixing screws & Washers
CHASSIS TRAY KIT
ORDERING INFORMATION
Case Depth Order Code
260 70-4004030
300 70-4004031
400 70-4004032
500 70-4004563
CONTENTS OF KIT:
1off Chassis Tray - 0.9mm Galvanised Steel
4off Fixings screws & nuts
CARRY HANDLES
These are available to suite suit both 19 inch (Full width) and 10.5 inch (Half Width)
Verotec cases and caseframes. They will hold up to 30kg and have a push button
tilt mechanism in increments of 30 degrees. This allow the Verotec case to be
carried or tilted on a work surface
CARRY HANDLES
ORDERING INFORMATION
Depth Width Order Code
Any 10.5 70-4004564
Any 19 70-4004565
CONTENTS OF KIT:
2 off Side Arms – Polycarbonate mid grey BS4800-00-A05
2 off Location Mouldings - Polycarbonate mid grey BS4800-00-A05
2 off Push Button Mouldings – Polycarbonate light grey BS4800-
00-A01
1 off Cross Bar – Extruded Aluminium, anodised
Fixings
284.00/438.0
260.00/414.0
Depth
To Suit Case Depth 260, 300,400 or 500
20.00
8,10,15 or 20 Pitches
Title Chassis Supports & Chassis Trays Dimensional Detail
FRONT PANEL
Carry Handle
5 Verotec Cases
UK +44 (0)2380-246900 US+1-603-821-9921 FR +33 (0)3-444-514-60
sales@verotec.co.uk sales@verotec.us sales@verotec.fr
5.13
Verotec Case: Accessories
CHASSIS TRAYS AND SUPPORT KITS
These are sold as separate items to give the maximum flexibility when creating
and internal tray within a Verotec case. Chassis tray supports are available in 4
depths each to suit the overall depth of the case they are fitted to.
Chassis trays are available in a range of depths and two widths 19inch and 10.5
inch. They are intended for the mounting of discreet components which would
not normally be mounted in a 19inch enclosure. If required, more than one tray
can be fitted to match the depth of the case, with a space to allow cables to be
passed between them.
CHASSIS TRAY SUPPORT KIT
ORDERING INFORMATION
CONTENTS OF KIT:
2off Chassis Tray Support - 1.2mm Galvanised Steel
4off Fixing screws & Washers
CHASSIS TRAY KIT
ORDERING INFORMATION
Case Depth Order Code
260 70-4004030
300 70-4004031
400 70-4004032
500 70-4004563
CONTENTS OF KIT:
1off Chassis Tray - 0.9mm Galvanised Steel
4off Fixings screws & nuts
CARRY HANDLES
These are available to suite suit both 19 inch (Full width) and 10.5 inch (Half Width)
Verotec cases and caseframes. They will hold up to 30kg and have a push button
tilt mechanism in increments of 30 degrees. This allow the Verotec case to be
carried or tilted on a work surface
CARRY HANDLES
ORDERING INFORMATION
Depth Width Order Code
Any 10.5 70-4004564
Any 19 70-4004565
CONTENTS OF KIT:
2 off Side Arms – Polycarbonate mid grey BS4800-00-A05
2 off Location Mouldings - Polycarbonate mid grey BS4800-00-A05
2 off Push Button Mouldings – Polycarbonate light grey BS4800-
00-A01
1 off Cross Bar – Extruded Aluminium, anodised
Fixings
284.00/438.0
260.00/414.0
Depth
To Suit Case Depth 260, 300,400 or 500
20.00
8,10,15 or 20 Pitches
Title Chassis Supports & Chassis Trays Dimensional Detail
FRONT PANEL
Carry Handle
5 Verotec Cases
UK +44 (0)2380-246900 US+1-603-821-9921 FR +33 (0)3-444-514-60
sales@verotec.co.uk sales@verotec.us sales@verotec.fr
