Verotec Case: Accessories CHASSIS TRAYS AND SUPPORT KITS These are sold as separate items to give the maximum flexibility when creating and internal tray within a Verotec case. Chassis tray supports are available in 4 depths each to suit the overall depth of the case they are fitted to. Chassis trays are available in a range of depths and two widths 19inch and 10.5 inch. They are intended for the mounting of discreet components which would not normally be mounted in a 19inch enclosure. If required, more than one tray can be fitted to match the depth of the case, with a space to allow cables to be passed between them. CHASSIS TRAY SUPPORT KIT ORDERING INFORMATION CONTENTS OF KIT: FRONT PANEL 2off Chassis Tray Support - 1.2mm Galvanised Steel 4off Fixing screws & Washers Title Chassis Supports & Chassis Trays Dimensional Detail 5 Verotec Cases CHASSIS TRAY KIT ORDERING INFORMATION Case Depth Order Code 260 70-4004030 300 70-4004031 400 70-4004032 500 70-4004563 20.00 8,10,15 or 20 Pitches To Suit Case Depth 260, 300,400 or 500 CONTENTS OF KIT: 1off Chassis Tray - 0.9mm Galvanised Steel 4off Fixings screws & nuts 284.00 /438.0 260.00 /414.0 CARRY HANDLES Depth These are available to suite suit both 19 inch (Full width) and 10.5 inch (Half Width) Verotec cases and caseframes. They will hold up to 30kg and have a push button tilt mechanism in increments of 30 degrees. This allow the Verotec case to be carried or tilted on a work surface CARRY HANDLES ORDERING INFORMATION Depth Width Order Code Any 10.5 70-4004564 Any 19 70-4004565 CONTENTS OF KIT: Carry Handle 2 off Side Arms - Polycarbonate mid grey BS4800-00-A05 2 off Location Mouldings - Polycarbonate mid grey BS4800-00-A05 2 off Push Button Mouldings - Polycarbonate light grey BS480000-A01 1 off Cross Bar - Extruded Aluminium, anodised Fixings UK +44 (0)2380-246900 sales@verotec.co.uk US+1-603-821-9921 sales@verotec.us FR +33 (0)3-444-514-60 sales@verotec.fr 5.13 Verotec Case: Accessories CHASSIS TRAYS AND SUPPORT KITS These are sold as separate items to give the maximum flexibility when creating and internal tray within a Verotec case. Chassis tray supports are available in 4 depths each to suit the overall depth of the case they are fitted to. Chassis trays are available in a range of depths and two widths 19inch and 10.5 inch. They are intended for the mounting of discreet components which would not normally be mounted in a 19inch enclosure. If required, more than one tray can be fitted to match the depth of the case, with a space to allow cables to be passed between them. CHASSIS TRAY SUPPORT KIT ORDERING INFORMATION CONTENTS OF KIT: FRONT PANEL 2off Chassis Tray Support - 1.2mm Galvanised Steel 4off Fixing screws & Washers Title Chassis Supports & Chassis Trays Dimensional Detail 5 Verotec Cases CHASSIS TRAY KIT ORDERING INFORMATION Case Depth Order Code 260 70-4004030 300 70-4004031 400 70-4004032 500 70-4004563 20.00 8,10,15 or 20 Pitches To Suit Case Depth 260, 300,400 or 500 CONTENTS OF KIT: 1off Chassis Tray - 0.9mm Galvanised Steel 4off Fixings screws & nuts 284.00 /438.0 260.00 /414.0 CARRY HANDLES Depth These are available to suite suit both 19 inch (Full width) and 10.5 inch (Half Width) Verotec cases and caseframes. They will hold up to 30kg and have a push button tilt mechanism in increments of 30 degrees. This allow the Verotec case to be carried or tilted on a work surface CARRY HANDLES ORDERING INFORMATION Depth Width Order Code Any 10.5 70-4004564 Any 19 70-4004565 CONTENTS OF KIT: Carry Handle 2 off Side Arms - Polycarbonate mid grey BS4800-00-A05 2 off Location Mouldings - Polycarbonate mid grey BS4800-00-A05 2 off Push Button Mouldings - Polycarbonate light grey BS480000-A01 1 off Cross Bar - Extruded Aluminium, anodised Fixings UK +44 (0)2380-246900 sales@verotec.co.uk US+1-603-821-9921 sales@verotec.us FR +33 (0)3-444-514-60 sales@verotec.fr 5.13