MBR10100CE SCHOTTKY BARRIER RECTIFIERS REVERSE VOLTAGE FORWARD CURRENT FEATURES - 100 Volts - 10 Amperes I2PAK * Metal of silicon rectifier, majority carrier conduction * Guard ring for transient protection * Low power loss, high efficiency * High surge&current capability, low VF * For use in low voltage, high frequency inverters, free I2PAK DIM. MIN. MAX. A 9.65 10.69 B 1.14 1.40 C 8.25 9.25 D - 1.40 F - 4.20 * Case: TO-262AA molded plastic * Plastic package has UL flammability classification G 12.70 14.73 H 2.29 2.79 94V-0 * Terminals: Solderable per MIL-STD-202 Method 208 * Moisture sensitivity: level 1 per J-STD-020D * Lead Free Finish, RoHS Compliant * Polarity: As marked on the body * Weight: 0.0571 ounces, 1.62 grams * Mounting position: Any I 0.51 1.14 wheeling, and polarity protection applications MECHANICAL DATA J 0.3 0.64 K 3.56 4.83 N 2.03 2.92 O 1.14 1.70 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. PARAMETER SYMBOL MBR10100CE UNIT Maximum Repetitive Peak Reverse Voltage VRRM 100 V Maximum RMS Voltage VRMS 70 V VDC 100 V IF(AV) 10 A IFSM 120 A Tj=25C Tj=125C Tj=25C Tj=125C VF 0.85 0.75 0.95 0.85 V Maximum DC Reverse Current at Rated DC Tj=25C Blocking Voltage Tj=125C IR 0.01 15 mA Maximum DC Blocking Voltage Average Rectified Output Current @Tc=115C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage Note(1) IF=5A@ IF=5A@ IF=10A@ IF=10A@ Typical thermal resistance Junction to Case RJC 5 C/W Typical thermal resistance Junction to Lead RJL 5.5 C/W Operating junction temperature range Storage temperature range Note : (1) (2) (3) TJ -55 to +150 C TSTG -55 to +150 C Rev.4, Sep-2012, KTHA19 300us Pulse Width, 2% Duty Cycle. Measured at 1.0MHz and applied reverse voltage of 4.0 VDC. Thermal Resistance test performed in accordance with JESD-51. Unit mounted on 0.75t glass-epoxy substrate with 30 x 30 x 1 copper plate heatsink, pad. RATING AND CHARACTERISTIC CURVES MBR10100CE FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT FIG.1- FORWARD CURRENT DERATING CURVE 120 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 12 10 8 6 4 2 RESISTIVE OR INDUCTIVE LOAD 100 80 60 40 20 8.3ms Single Half Sine-Wave 0 0 0 25 50 75 100 125 1 150 10 O FIG.3- TYPICAL JUNCTION CAPACITANCE 1000 100 NUMBER OF CYCLES AT 60Hz CASE TEMPERATURE, ( C) FIG.4 - TYP ICAL FORWARD CHARACTERISTICS Capacitance,(pF) INSTANTANEOUS FORWARD CURRENT, (A) 100 100 10 10 100 1 Tj=25C 0.1 PULSE WIDTH 300us, 2% Duty Cycle 0.01 0.1 REVERSE,VOLTAGE 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.3- TYPICAL REVERS E CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, (mA) 1 Tj=125C 10 1 Tj=125C 0.1 0.01 0.001 Tj=25C 0.0001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (V) 120 1 1.1 Legal Disclaimer Notice MBR10100CE Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.