IRFF9130
2www.irf.com
Thermal Resistance
Parameter Min Typ Max Units T est Conditions
RthJC Junction-to-Case — — 5.0
RthJA Junction-to-Ambient — — 175 Typical sock et mount
°C/W
Source-Drain Diode Ratings and Characteristics
Parameter Min Typ Max Units T est Conditions
ISContinuous Source Current (Body Diode) — — -6.5
ISM Pulse Source Current (Body Diode) ➀— — -25
VSD Diode F orward V oltage — — -4.7 V T j = 25°C, IS =-6.5A, VGS = 0V ➃
trr Reverse Recovery Time — — 250 nS Tj = 25°C, IF = -6.5A, di/dt ≤ -100A/µs
QRR Reverse Recovery Charge — — 3.0 µ C VDD ≤ -50V ➃
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
A
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter M in Typ Max Un its T e st Conditions
BVDSS Drain-to-Source Breakdown V oltage -100 — — V VGS = 0V, ID = -1.0mA
∆BVDSS/∆TJTemperature Coefficient of Breakdown — - 0.10 — V/°C R efe ren ce t o 25°C, ID = -1.0mA
Voltage
RDS(on) Static Drain-to-Source On-State — — 0.30 VGS = -10V, ID = -4.1A ➃
Resistance — — 0.345 VGS =-10V, ID =-6.5A ➃
VGS(th) Gate Threshold V oltage -2.0 — -4.0 V VDS = VGS, ID = -250µA
gfs Forward Transconductance 2.5 — — S ( ) V
DS > -15V, IDS = -4.1A ➃
IDSS Zero Gate V oltage Dr ain Current — — -25 VDS= -80V, VGS=0V
— — -250 µA VDS = -80V
VGS = 0V, TJ = 125°C
IGSS Gate-to-Source Leakage Forward — — -100 VGS = -20V
IGSS Gate-to-Source Leakage Reverse — — 100 nA VGS = 20V
QgT otal Gate Charge 14.7 — 34.8 VGS =-10V, ID = -6.5A
Qgs Gate-to-Source Charge 1.0 — 7.1 nC VDS= -50V
Qgd Gate-to-Drain (‘Miller’) Charge 2.0 — 21
td(on) Turn-On Delay Time — — 60 VDD = -50V, ID = -6.5A,
trRise Time — — 140 VGS =-10V,RG =7.5Ω
td(off) Turn-Off Delay Time — — 140
tfFall Time — — 140
LS + LDTotal Inductance — 7.0 —
Ciss Input Capacitance — 800 VGS = 0V, VDS = -25V
Coss Output Capacitance — 350 — pF f = 1.0MHz
Crss Reverse Transfer Capacitance — 125 —
Ω
nH
ns
Ω
Measured from drain lead (6mm/0.25in. from
package) to source lead (6mm/0.25in. from
package)