EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 1 of 12
Device No:SZDSE-192-A10 Prepared date: 17-May-2006 Prepared by: Xiaoyan
Technical Data Sheet
Chip LED with Bi-Color(Multi-Color)
19-22/R6G6C-A01/2T
Feature
Package in 8mm tape on 7diameter reel.
Compatible with automatic placement equipment.
Compatible with infrared and vapor phase reflow
solder process.
Multi-color type.
Pb-free.
The product itself will remain within RoHS compliant version.
Descriptions
The 19-22 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
Besides, lightweight makes them ideal for
miniature applications etc.
Applications
Backlighting in dashboard and switch.
Telecommunication: indicator and backlighting in
telephone and fax.
Flat backlight for LCD, switch and symbol.
General use.
Device Selection Guide
Chip
Type Material Emitted Color Lens Color
R6 AlGaInP Brilliant Red
G6 AlGaInP Brilliant Yellow Green Water Clear
EVERLIGHT ELECTRONICS CO.,LTD.
19-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 2 of 12
Device No:SZDSE-192-A10 Prepared date: 17-May-2006 Prepared by: Xiaoyan
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD.
19-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 3 of 12
Device No:SZDSE-192-A10 Prepared date: 17-May-2006 Prepared by: Xiaoyan
Absolute Maximum Ratings (Ta=25)
Parameter Symbol Rating Unit
Reverse Voltage VR 5 V
Forward Current IF 25 mA
Peak Forward Current
(Duty 1/10 @1KHz) IFP 60 mA
Power Dissipation Pd 60 mW
Electrostatic Discharge (HBM) ESD 2000 V
Operating Temperature Topr -40 ~ +85
Storage Temperature Tstg -40 ~ +90
Soldering Temperature Tsol Reflow Soldering : 260 for 10 sec.
Hand Soldering : 350 for 3 sec.
EVERLIGHT ELECTRONICS CO.,LTD.
19-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 4 of 12
Device No:SZDSE-192-A10 Prepared date: 17-May-2006 Prepared by: Xiaoyan
Electro-Optical Characteristics (Ta=25)
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity Iv R6
G6
45.0
45.0
----
----
72.0
72.0 mcd
Viewing Angle 2θ1/2 ----- 130 ----- deg
Peak Wavelength λp R6
G6 ----- 632
575 ----- nm
Dominant
Wavelength
λd R6
G6
617.5
567.5
-----
-----
633.5
575.5
nm
Spectrum Radiation
Bandwidth
△λ R6
G6 ----- 20
20 ----- nm
Forward Voltage VF R6
G6
1.7
1.7
2.0
2.0
2.4
2.4 V
IF=20mA
Reverse Current IR R6
G6 ----- ----- 10
10 μA VR=5V
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
EVERLIGHT ELECTRONICS CO.,LTD.
19-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 5 of 12
Device No:SZDSE-192-A10 Prepared date: 17-May-2006 Prepared by: Xiaoyan
R6
Bin Range Of Luminous Intensity
Bin Min Max Unit Condition
P1 45.0 57.0
P2 57.0 72.0
mcd IF =20mA
G6
Bin Range Of Luminous Intensity
Bin Min Max Unit Condition
P1 45.0 57.0
P2 57.0 72.0
mcd IF =20mA
R6
Bin Range Of Dom. Wavelength
Group Bin Min Max Unit Condition
E4 617.5 621.5
E5 621.5 625.5
E6 625.5 629.5
A
E7 629.5 633.5
nm IF =20mA
G6
Bin Range Of Dom. Wavelength
Group Bin Min Max Unit Condition
C15 567.5 569.5
C16 569.5 571.5
C17 571.5 573.5
B
C18 573.5 575.5
nm IF =20mA
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
EVERLIGHT ELECTRONICS CO.,LTD.
19-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 6 of 12
Device No:SZDSE-192-A10 Prepared date: 17-May-2006 Prepared by: Xiaoyan
Typical Electro-Optical Characteristics Curves
R6
EVERLIGHT ELECTRONICS CO.,LTD.
19-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 7 of 12
Device No:SZDSE-192-A10 Prepared date: 17-May-2006 Prepared by: Xiaoyan
Typical Electro-Optical Characteristics Curves
G6
EVERLIGHT ELECTRONICS CO.,LTD.
19-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 8 of 12
Device No:SZDSE-192-A10 Prepared date: 17-May-2006 Prepared by: Xiaoyan
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD.
19-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 9 of 12
Device No:SZDSE-192-A10 Prepared date: 17-May-2006 Prepared by: Xiaoyan
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
EVERLIGHT ELECTRONICS CO.,LTD.
19-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 10 of 12
Device No:SZDSE-192-A10 Prepared date: 17-May-2006 Prepared by: Xiaoyan
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level90%
LTPD10%
No. Items Test Condition
Test
Hours/Cycles Sample
Size Ac/Re
1 Reflow Soldering
Temp. : 260℃±5
Min. 5sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H : +100 15min
5 min
L : -40 15min
300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100 5min
10 sec
L : -10 5min
300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40 1000 Hrs. 22 PCS. 0/1
6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1
EVERLIGHT ELECTRONICS CO.,LTD.
19-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 11 of 12
Device No:SZDSE-192-A10 Prepared date: 17-May-2006 Prepared by: Xiaoyan
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5 for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
EVERLIGHT ELECTRONICS CO.,LTD.
19-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 12 of 12
Device No:SZDSE-192-A10 Prepared date: 17-May-2006 Prepared by: Xiaoyan
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
E
VERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com