Contact Cleaning Strips Product Code: CCS TECHNICAL DATA SHEET PRODUCT DESCRIPTION Contact Cleaning Strips are made from specially developed card, impregnated with a speciality Contact Lubricant. They offer an extremely easy and effective method of returning switches to full working order after they have become worn or contaminated. They can also be used on new switches to extend their lifetime. Contact Cleaning Strips are NATO Stock Listed. PRODUCT USE Contact Cleaning Strips have been designed to clean, lubricate and protect small relay, non-wiping contacts, edge connectors and other small contacts operating in low voltage, low current circuits in telecommunications, electronic and electrical circuitry. They also clean, lubricate and protect other areas where only a very thin film of contact treatment is required and have not been subjected to heavy wear. FEATURES * Increases reliability of contacts by reducing contact resistance * Reduces mechanical wear and contact erosion as applied in a very thin film thereby increasing the life of the contacts * Specially selected card with the correct degree of surface abrasion * Economical in use - 20 strips are sufficient to clean and lubricate approximately 200 contact pairs DIRECTIONS FOR USE A clean part of the strip is inserted between closed contacts and moved back and forth several times. The abrasive quality of the card and the loosening property of the contact lubricant will remove contamination Copyright Electrolube 2003 All information is given in good faith but without warranty. Properties are given as a guide only and should not be taken as a specification. Electrolube cannot be held responsible for the performance of its products within any application determined by the customer, who must satisfy themselves as to the suitability of the product. ELECTROLUBE, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0AN Tel: +44(0) 1283-222111 Fax: +44(0) 1283-550177 www.electrolube.com ISO 9002 Registered Firm. Certificate No. FM 32082 Contact Cleaning Strips - Page 2 which will appear as a dark mark on the strip. Tear off part of the strip that has been used and insert a clean area between the next contact pair. TECHNICAL DATA SHEET Contact Cleaning Strips can be used for initial cleaning of normal arcing contacts and should be followed with a further application of Electrolube Contact Lubricant to protect the contacts from arc erosion. PACKAGING 20 strips per pack ORDER CODE CCS020 (MOQ = 50 packets) Nato Stock No: 6850-99-643-4649 Copyright Electrolube 2003 All information is given in good faith but without warranty. Properties are given as a guide only and should not be taken as a specification. Electrolube cannot be held responsible for the performance of its products within any application determined by the customer, who must satisfy themselves as to the suitability of the product. ELECTROLUBE, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0AN Tel: +44(0) 1283-222111 Fax: +44(0) 1283-550177 www.electrolube.com ISO 9002 Registered Firm. Certificate No. FM 32082