ELECTROLUBE, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0AN
Tel: +44(0) 1283-222111 Fax: +44(0) 1283-550177 www.electrolube.com
ISO 9002 Registered Firm. Certificate No. FM 32082
TECHNICAL
DATA
SHEET
Copyright
Electrolube
2003
All information is
given in good
faith but without
warranty.
Properties are
given as a guide
only and should
not be taken as a
specification.
Electrolube
cannot be held
responsible for
the performance
of its products
within any
application
determined by
the customer,
who must satisfy
themselves as to
the suitability of
the product.
Product Code:
CCS
PRODUCT DESCRIPTION
Contact Cleaning Strips
are made from specially developed card,
impregnated with a speciality Contact Lubricant. They
offer an
extremely easy and effective method of returning switches to full
working order after they have become worn or contaminated. They can
also be used on new switches to extend their lifetime.
Contact Cleaning Strips are NATO Stock Listed.
PRODUCT USE
Contact Cleaning Strips
have been designed to clean, lubricate and
protect small relay, non-
wiping contacts, edge connectors and other
small contacts operating in low voltage, low current circuits in
telecommunications, electronic and electrical c
ircuitry. They also clean,
lubricate and protect other areas where only a very thin film of contact
treatment is required and have not been subjected to heavy wear.
FEATURES
* Increases reliability of contacts by reducing contact resistance
* Reduces mechanical wear and contact erosion as applied in a
very thin film thereby increasing the life of the contacts
* Specially selected card with the correct degree of surface
abrasion
* Economical in use - 20 strips are sufficient to clean and
lubricate approximately 200 contact pairs
DIRECTIONS FOR USE
A clean part of the strip is inserted between closed
contacts and moved
back and forth several times. The abrasive quality of the card and the
loosening property of the contact lubricant will re
move contamination
Contact Cleaning Strips
ELECTROLUBE, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0AN
Tel: +44(0) 1283-222111 Fax: +44(0) 1283-550177 www.electrolube.com
ISO 9002 Registered Firm. Certificate No. FM 32082
TECHNICAL
DATA
SHEET
Copyright
Electrolube
2003
All information is
given in good
faith but without
warranty.
Properties are
given as a guide
only and should
not be taken as a
specification.
Electrolube
cannot be held
responsible for
the performance
of its products
within any
application
determined by
the customer,
who must satisfy
themselves as to
the suitability of
the product.
which will appear as a dark mark on the strip. Tear off part of the strip
that has been used and insert a clean area between the next contact
pair.
Contact Cleaning Strips
can be used for initial cleaning of normal
arcing contacts and
should be followed with a further application of
Electrolube Contact Lubricant to protect the contacts from arc erosion.
PACKAGING ORDER CODE
20 strips per pack CCS020 (MOQ = 50 packets)
Nato Stock No: 6850-99-643-4649
Contact Cleaning Strips – Page 2
