MIL-C-26482, Series 2 Connectors PV * Intermatable with MIL-C-26482 Series I * Operating termperature - 55C to + 200C The PV connector is designed to meet the rugged requirements of MIL-C-26482, Series 2/MIL-C-83723 Series I*, the specification which delineates the critical requirements of space-age applications. PV connectors have been used extensively on major aerospace programs requiring general-purpose, miniature cylindrical bayonet coupling connectors such as Space Shuttle, Apollo, ATM, OWS Minuteman, Skylab, Thor-Delta, Titan IIIC, and Viking. 4 3 The PV series is an important member of the Universal Interconnect System (UIS) - the only system that can perform all interconnection missions. This system is adaptable for use with connectors of all shapes and sizes, including circular and rectangular configurations. standard, miniature and subminiature sizes. UIS is a rear servicing system that evolved from the LITTLE CAESAR(R) rear release contact retention assembly, pioneered and developed by ITT Cannon. Since this time, ITT Cannon, and its licensees, have supplied to industry over 250 million interconnections utilizing this system. Universal Insertion / Extraction Tool Style - A single,expendable plastic tool is used for insertion and extraction of both pins and sockets. PV7 connectors are available under numerous industrial specifications, some of which are listed below: Closed-Entry Socket Insert - Hard dielectric socket face of mating connector has lead-in chamfers for positive alignment of pins and sockets. * CS512089 Jet Propulsion Laboratory * 40M39569 NASA, George C. Marshall Space Flight Center * 81D52 Martin Marietta, Denver Division * MG414-0365 Rockwell International Space Division Interfacial Pin Insert Seal - Universal interconnect permits design of raised moisture barriers around each pin which mate into lead-in chambers of hard face sockets insert for individual contact sealing. Interfacial sealing is never touched by service tools. * AC414-0013 Rockwell International Autonetics Division * STS0003 McDonnell Douglas Astronautics Superior Contact Stability - Rear Contact Release System (LITTLE CAESAR contact assembly) features a stamped metal retaining clip captivated by molded-in shoulders of each contact cavity in the insulator. A rear-inserted plastic tool expands the tines beyond the contact shoulder, releasing the contact. This connector series is manufactured to accommodate the following backshells: M85049/31 (MS3416), M85049/51 (MS3418) and M85049/ 52 (MS3417). Backshells are not included with connector and must be ordered separately. Backshells on page 161 are Non-MS type. 1 2 Simple, Strong Contact Design - One basic configuration eliminates undercuts and maximizes bend resistance for positive contact mating. Polarized Backshells - Interlocking teeth on the front of the backshell and rear portion of the shell allow endbells to be positioned as desired, eliminating chafing of wire during assembly. Military Specification Cross Reference PV7 and MIL-C-26482 (Series 2) Replacement for MIL-C-26482 (Series 1) MS3110,MS3120 MS3111,MS3121 MS3112,MS3122 MS3114,MS3124 MS3116,MS3126 NAS1599 NAS1650,NAS1699 NAS1651,NAS1700 NAS1652,NAS1701 NAS1653,NAS1702 MS Standards MS3470 MS3471 MS3470 MS3474 MS3476 MS3472 MS3475 MS3470 MS3472 MS3474 MS3476 ITT Cannon Prefix Commercial Design MIL-C-26482 PV70 PV71 PV70 PV74 PV76 PV72 PV75 MIL-C-83723* Slash Sheet Description Socket /1 /7 /1 /5 /13 /3 /43 Pin /2 /8 /12 /6 /14 /4 /42 Narrow Flange Receptacle Cable Connecting Receptacle Narrow Flange Receptacle Jam Nut Receptacle Straight Plug Wide Flange Receptacle Straight Plug, RFI Shielded /1 /3 /5 /13 /2 /4 /6 /14 Narrow Flange Receptacle Wide Flange Receptacle Jam Nut Receptacle Straight Plug *NOTE: M83723 series has been superseded by MIL-C-26482 Series 2. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 157 MIL-C-26482, Series 2 Connectors PV Performance and Material Specifications MATERIALS AND FINISHES Description Material Finish Shell Aluminum alloy per QQ-A-367, QQ-A-591 or QQ-A-225 Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab cadmium over nickel Insulators Rigid dielectric None Elastomers (grommets, interfacial and O ring seals) Silicone rubber (ITT Cannon blend) or Fluorosiclicone rubber (ITT Cannon blen) None None Contacts Copper alloy Gold page per MIL-G-45204 Coupling Nut Aluminum alloy per QQ-A-591 Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab cadmium over nickel Jam Nut (on PV74) Aluminum alloy per QQ-A-225 Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab cadmium over nickel ELECTRICAL Contact Size Wire Size 12 12 16 20 Insulation O.D. Limits, inch (mm) min. max. Max Current for Test (amps) Potential Drop (Millivolts at 25C) 23 50 14 17 45 16 13 50 20 7.5 45 20 7.5 55 3.0 45 24 .097 (2.46) .053 (1.53) .040 (1.02) .158 (4.01) .103 (2.62) .083 (2.11) Dielectric Withstanding Voltage (Test Volatge) Service Rating Sea Level I 1500 Vac rms 70,000 ft. Altitude 375 Vac rms 5000 megohms minimum (25C) II 2300 Vac rms 500 Vac rms 5000 megohms minimum How to Order PV MS 70 3470 L L 18 18 -32 -32 P P W W L SERIES PREFIX SHELL STYLE CLASS SIZE CONTACT ARRANGEMENT CONTACT TYPE ALTERNATE INSERT POSITIONS LESS COMPONENTS SERIES PREFIX MS - Complies with MIL-C-26482 Series 2 PV - ITT Cannon Interchangeable with MIL-C-26482, Series 2 SHELL STYLE ITT Cannon Part No. Military No. PV70 PV71 PV72 PV74 PV75 PV76 MS3470 MS3471 MS3472 MS3474 MS3475 MS3476 Description - Narrow Flange Receptacle - Cable Connecting Receptacle - Wide Flange Receptacle - Jam Nut Receptacle - Straight Plug, RFI Shielded - Straight Plug CLASS (PV Series and MS Series) *A - Fluid resistant, 200C, non-conductive (anodized) L - Fluid resistant, 200C, conductive, finish (nickely) W - Corrosive and fluid resistant, 175C (cadmium over nickel) CONTACT TYPE P - Pin contact S - Socket contact A - Less pin contact* (MS only) B - Less socket contacts* (MS only) * The "A" and "B" designators are used only when other than power contacts are ato be installed (i.e. shielded, coaxial and thermocouple contacts). ALTERNATE INSERT POSITIONS SHELL SIZE 8, 10, 12, 14, 16, 18, 20, 22 and 24 (Size 8 avialable in PV70 & 76 only) CONTACT ARRANGEMENTS See page 162. No designation required for normal posistion. Standard MS alternate positions available. LESS COMPONENTS Use "L" if PV connectors are ordered less contacts, sealing plugs and insertion/extraction tool ("L" is not stamped on connectors). To order MS connectors less contacts, purchase order must state less contacts. *Consult factory for availablility. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 158 MIL-C-26482, Series 2 Connectors PV Narrow Flange Receptacle MS3470 PV70 4 HOLES .125/.115 (3.18/2.92) DIA. SIZES 10-22 .152/.142/(3.86/3.61) DIA SIZE 24 ONLY POLARIZING GROOVE B U THD F DIA L (TYP) J .140 RAD. MAX. G K (TYP) .130/.190 (3.30/4.83) (TP) G Max J Max U Thread UNEF Class 2A Shell Size* B Max F Max K L 8 .462 (11.73) .474 (12.04) 1.215 (30.85) .078 (1.98) .594 (15.09) .828 (21.03) 1/2-20 10 .462 (11.73) .594 (15.01) 1.215 (30.85) .078 (1.98) .719 (18.26) .954 (24.23) 5/8-24 12 .462 (11.73) .751 (19.08) 1.215 (30.85) .078 (1.98) .812 (20.62) 1.047 (26.59) 3/4-20 14 .462 (11.73) .876 (22.25) 1.215 (30.85) .078 (1.98) .906 (23.01) 1.141 (28.98) 7/8-20 16 .462 (11.73) 1.001 (25.43) 1.215 (30.85) .078 (1.98) .969 (24.61) 1.234 (31.34) 1-20 18 .462 (11.73) 1.126 (28.60) 1.215 (30.85) .078 (1.98) 1.062 (26.97) 1.328 (33.73) 1-1/16-18 20 .587 (14.91) 1.251 (31.78) 1.275 (32.40) .110 (2.79) 1.156 (29.36) 1.453 (36.91) 1-3/16-18 22 .587 (14.91) 1.376 (34.95) 1.275 (32.40) .110 (2.79) 1.250 (31.75) 1.578 (40.08) 1-5/16-18 24 .620 (15.75) 1.501 (38.13) 1.275 (32.40) .110 (2.79) 1.375 (34.93) 1.703 (43.26) 1-7/16-18 Cable Connecting Receptacle MS3471 PV71 B POLARIZING GROOVE J V THD R DIA. MAX. A DIA. W .130/.190 (3.30/4.83) S MAX. (TYP.) Shell Size* GR REF. TYPE R TYPE S HR Backshell Assemblies not supplied with MS connectors. Perfomance Specifications - Page 158 Contacts, Sealing Plugs, Assembly Tools - Pages 163, 165 J Max R Dia. Max S Max W Max U Thread UNEF Class 2A 10 .591 (15.01) .462 (11.73) .078 (1.98) 1.082 (27.48) .954 (24.23) 1.215 (30.86) 5/8-24 12 .751 (19.08) .462 (11.73) .078 (1.98) 1.176 (29.87) 1.047 (26.59) 1.215 (30.86) 3/4-20 14 .876 (22.25) .462 (11.73) .078 (1.98) 1.270 (32.26) 1.141 (28.98) 1.215 (30.86) 7/8-20 16 1.001 (25.43) .462 (11.73) .078 (1.98) 1.364 (34.64) 1.234 (31.34) 1.215 (30.86) 1-20 18 1.126 (28.60) .462 (11.73) .078 (1.98) 1.458 (37.03) 1.328 (33.73) 1.215 (30.86) 1-1/16-18 20 1.251 (31.78) .587 (14.91) .110 (2.79) 1.708 (43.38) 1.578 (40.08) 1.275 (32.38) 1-5/16-18 22 1.376 (34.95) .587 (14.91) .110 (2.79) 1.708 (43.38) 1.578 (40.08) 1.275 (32.38) 1-5/16-18 24 1.501 (38.13) .620 (15.75) .110 (2.79) 1.832 (46.53) 1.703 (43.26) 1.275 (32.38) 1-7/16-18 Shell Size* TYPE C Ec Max. 10 1.492 (37.90) 12 1.492 (37.90) 14 1.492 (37.90) 16 1.492 (37.90) 18 ES REF. FS TYPE C B Max Receptacle Assembly With Backshell ER REF. EC REF. A Max TYPE S Fs Max. TYPE R Hr Max. Es Max. Gr Max. Er Max. .286 (7.26) 1.842 (46.79) .880 (23.35) .286 (7.26) 2.115 (53.72) .416 (10.57) 1.842 (46.79) .950 (24.13) .416 (10.57) 2.250 (57.15) .476 (12.09) 2.077 (52.76) 1.010 (25.65) .476 (12.09) 2.340 (59.44) .626 (15.90) 2.077 (52.76) 1.070 (27.18) .626 (15.90) 2.475 (62.87) 1.492 (37.90) .706 (17.93) 2.077 (52.76) 1.130 (28.70) .706 (17.93) 2.574 (65.38) 20 1.552 (39.42) .831 (21.11) 2.137 (54.28) 1.190 (30.23) .831 (21.11) 2.767 (70.28) 22 1.552 (39.42) .956 (24.28) 2.137 (54.28) 1.260 (32.00) .956 (24.28) 2.890 (73.41) 24 1.552 (39.42) 1.081 (27.46) 2.137 (54.28) 1.320 (33.53) 1.081 (27.46) 3.012 (76.50) *See page 158 for part numbers. To order backshell assemblies separately, see page 161. Contacts Arrangements - Page 162 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 159 MIL-C-26482, Series 2 Connectors PV Wide Flange Receptacle MS3472 PV72 4 HOLES .150 + _ .005 (3.81 + _ 0.13mm) DIA. POLARIZING GROOVE B P THD. A DIA. Q (TYP) G F H (TP) .140 RAD. MAX. Shell Size* A Max. .130/.190 (3.30/4.83) B Max. F Max. G Max. H Max. Q Max. P Thread UNEF Class A 10 .591 (15.01) .493 (12.52) 1.215 (30.85) .078 (1.98) .812 (20.62) 1.141 (28.98) 5/8-24 12 .751 (19.08) .493 (12.52) 1.215 (30.85) .078 (1.98) .938 (23.83) 1.266 (32.16) 3/4-20 14 .876 (22.25) .493 (12.52) 1.215 (30.85) .078 (1.98) 1.031 (26.19) 1.360 (34.54) 7/8-20 16 1.001 (25.43) .493 (12.52) 1.215 (30.85) .078 (1.98) 1.125 (28.58) 1.453 (36.91) 1-20 18 1.126 (28.60) .493 (12.52) 1.215 (30.85) .078 (1.98) 1.203 (30.56) 1.532 (38.91) 1-1/16-18 20 1.251 (31.78) .587 (14.91) 1.275 (32.40) .110 (1.98) 1.297 (32.94) 1.688 (42.88) 1-3/16-18 22 1.376 (34.95) .587 (14.91) 1.275 (32.40) .110 (1.98) 1.375 (34.93) 1.766 (44.86) 1-5/16-18 24 1.501 (38.13) .620 (15.75) 1.275 (32.40) .110 (1.98) 1.500 (38.10) 1.891 (48.03) 1-7/16-18 Jam Nut Receptacle MS3474 PV74 GG POLARIZING GROOVE L THD. W F DIA. V B G A H .130/.190 (3.30/4.83) Shell Size* V Max. A Max. B Max. F Max. G Max. GG Panel Thickness H Max. W Dia. Max. L Thread UNEF Class 2 8 .954 (24.23) .767 (19.48) .113 (2.87) .474 (12.04) .707 (17.96) .187/.062 (4.75/1.57) 1.215 (30.86) 1.078 (27.38) 1/2-20 10 1.078 (27.38) .892 (22.66) .113 (2.87) .591 (15.01) .707 (17.96) .187/.062 (4.75/1.57) 1.215 (30.85) 1.203 (30.56) 5/8-24 12 1.266 (32.16) 1.079 (27.41) .113 (2.87) .751 (19.08) .707 (17.96) .187/.062 (4.75/1.57) 1.215 (30.85) 1.391 (35.33) 3/4-20 14 1.391 (35.33) 1.205 (30.61) .113 (2.87) .876 (22.25) .707 (17.96) .187/.062 (4.75/1.57) 1.215 (30.85) 1.516 (38.51) 7/8-20 16 1.516 (38.51) 1.329 (33.76) .113 (2.87) 1.001 (25.43) .707 (17.96) .187/.062 (4.75/1.57) 1.215 (30.85) 1.641 (41.68) 1-20 18 1.641 (41.68) 1.455 (36.96) .113 (2.87) 1.126 (28.60) .707 (17.96) .187/.062 (4.75/1.57) 1.215 (30.85) 1.766 (44.86) 1-1/16-18 20 1.828 (46.43) 1.579 (40.11) .148 (3.76) 1.251 (31.78) .772 (19.61) .250/.062 (6.35/1.57) 1.275 (32.40) 1.954 (49.63) 1-3/16-18 22 1.954 (49.63) 1.705 (40.11) .148 (3.76) 1.376 (34.95) .772 (19.61) .250/.062 (6.35/1.57) 1.275 (32.40) 2.078 (52.78) 1-5/16-18 24 2.078 (52.78) 1.829 (46.46) .148 (3.76) 1.501 (38.13) .772 (19.61) .219/.062 (5.56/1.57) 1.275 (32.40) 2.203 (55.96) 1-7/16-18 Receptacle Assembly With Backshell BBR REF. BBC REF. BBS REF. FS GR REF. TYPE R TYPE C TYPE S HR Backshell Assemblies not supplied with MS connectors. Performance Specifications - Page 158 Contacts, Sealing Pluts, Assembly Tools - Pages 163, 165 Shell Size* TYPE C BBc Max. BBs Max. TYPE S 10 1.492 (37.90) 1.842 (46.79) .286 (7.26) 2.115 (53.72) .880 (22.35) .286 (7.26) 12 1.492 (37.90) 1.842 (46.79) .416 (10.57) 2.250 (57.15) .950 (24.13) .416 (10.57) 14 1.492 (37.90) 2.077 (52.76) .476 (12.09) 2.340 (59.44) 1.010 (25.65) .476 (12.09) 16 1.492 (37.90) 2.077 (52.76) .626 (15.90) 2.475 (62.87) 1.070 (27.18) .626 (15.90) 18 1.492 (37.90) 2.077 (52.76) .706 (17.93) 2.574 (65.38) 1.130 (28.70) .706 (17.93) 20 1.552 (39.42) 2.137 (54.28) .831 (21.11) 2.767 (70.28) 1.190 (30.23) .831 (21.11) 22 1.552 (39.42) 2.137 (54.28) .956 (24.28) 2.890 (73.41) 1.260 (32.00) .956 (24.28) 24 1.552 (39.42) 2.137 (54.28) 1.081 (27.46) 3.012 (76.50) 1.320 (33.53) 1.081 (27.46) Fs Max. TYPE R GR Max. BBR Max. HR Max. * See page 158 for part numbers. To order backshell assemblies separately, see page 161. Contact Arrangments - Page 162 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 160 MIL-C-26482, Series 2 Connectors PV Straight Plug PV76 MS3476 POLARIZING BOSS E THD. A DIA. U DIA. W .130/.190 (3.30/4.83) MS34745 PV75 Straight Plug, RFI Shielded Shell Size* A Dia. Max. U Max. W Max. E Thread UNEF Class 2A 8 .765 (19.43) .782 (19.86) 1.230 (31.24) 1/2-20 10 .840 (21.34) .926 (23.52) 1.230 (31.24) 5/8-24 12 .999 (25.37) 1.043 (26.49) 1.230 (31.24) 3/4-20 14 1.139 (28.93) 1.183 (30.05) 1.230 (31.24) 7/8-20 16 1.261 (32.03) 1.305 (33.15) 1.230 (31.24) 1-20 18 1.337 (33.96) 1.391 (35.33) 1.230 (31.24) 1-1/16-18 20 1.477 (37.52) 1.531 (38.89) 1.230 (31.24) 1-3/16-18 22 1.602 (40.69) 1.656 (42.06) 1.230 (31.24) 1-5/16-18 24 1.723 (43.76) 1.777 (45.14) 1.230 (31.24) 1-7/16-18 Shell Size* E Thread UNEF Class 2A A Dia. Max. U Max. W Max. 10 5/8-24 .840 (21.34) .926 (21.72) 1.230 (31.24) 12 3/4-20 .999 (25.37) 1.043 (26.42) 1.230 (31.24) 14 7/8-20 1.139 (28.93) 1.183 (29.97) 1.230 (31.24) 16 1-20 1.261 (32.03) 1.305 (33.15) 1.230 (31.24) 18 1-1/16-18 1.337 (33.96) 1.391 (35.33) 1.230 (31.24) 20 1-3/16-18 1.477 (37.52) 1.531 (38.89) 1.230 (31.24) 22 1-5/16-18 1.602 (40.69) 1.656 (42.06) 1.230 (31.24) 24 1-7/16-18 1.723 (43.76) 1.777 (45.14) 1.230 (31.24) * See page 158 for part numbers. Plug Assemblies with Backshell VS REF. VC REF. TYPE C VC Max. Shell Size* VR REF. TYPE S FS Max. VS Max. GR Max. TYPE R HR Max. VR Max. 8 FS GR REF. TYPE C TYPE S HR TYPE R Backshell Assemblies not supplied with MS connectors. Performance Specifications - Page 158 Contacts, Sealing Pluts, Assembly Tools - Pages 163, 165 Contact Arrangments - Page 162 10 1.507 (38.28) .286 (7.26) 1.857 (47.17) .880 (22.35) .286 (7.26) 2.130 (54.10) 12 1.507 (38.28) .416 (10.57) 1.857 (47.17) .950 (24.13) .416 (10.57) 2.265 (57.53) 14 1.507 (38.28) .476 (12.09) 2.092 (53.14) 1.010 (25.65) .476 (12.09) 2.355 (59.82) 16 1.507 (38.28) .626 (15.90) 2.092 (53.14) 1.070 (27.18) .626 (15.90) 2.490 (63.25) 18 1.507 (38.28) .706 (17.93) 2.092 (53.14) 1.130 (28.70) .706 (17.93) 2.589 (65.76) 20 1.507 (38.28) .831 (21.11) 2.092 (53.14) 1.190 (30.23) .831 (21.11) 2.722 (69.14) 22 1.507 (38.28) .956 (24.28) 2.092 (53.14) 1.260 (32.00) .956 (24.28) 2.845 (72.26) 24 1.507 (38.28) 1.081 (27.46) 2.092 (52.14) 1.320 (33.53) 1.081 (27.46) 2.967 (75.36) * See page 158 for part numbers. To order backshell assemblies separatedly, see page 161. Backshells (Non-MS) (Not supplied with MS Connectors) Short (C) Straight (S) TYPE C (SHORT) 90 Degree (R) TYPE S (Straight) TYPE R (90) Shell Size* ITT CANNON Conductive (Nickel finish) ITT CANNON Conductive (Nickel finish) ITT CANNON Conductive (Nickel finish) 10 057-0716-002 057-0683-002 057-0704-001 12 057-0717-002 057-0684-002 057-0705-001 14 057-0718-002 057-0685-002 057-0706-001 16 057-0719-002 057-0686-002 057-0707-001 18 057-0720-002 057-0687-002 057-0708-001 20 057-0721-002 057-0688-002 057-0709-001 22 057-0722-002 057-0689-002 057-0710-001 24 057-0723-002 057-0731-002 057-0711-001 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 161 MIL-C-26482, Series 2 Connectors PV Contact Arrangements Face view, pin insert G A C C A B A B C E A H B E G A D D C D E B B C J F A E B K C C D B D C Shell Size No. of Contacts Service Rating B A H F A F 8-33* 3-#20 I 8-98* 3-#20 I 10-6 6-#20 I 12-3 3-#16 II 12-8 8-#20 I 12-10 10-#20 I 14-4 4-#12 I 14-5 5-#16 II A A R A H A J G B M L E Shell Size No. of Contacts Service Rating K M L B N T C J D C H 14-12 4-#16, 8-#20 I U R D H G B P F R D S C E 14-18 18-#20 I V H 14-19 19-#20 I 16-8 8-#16 II G Z 16-23 1-#16, 22-#20 I E E H G 16-26 26-#20 I 18-8 8-#12 I A N T A A S H B c N D M E Z a L 18-11 11-#16 II t E u e H f P N M G d r g R F p h A N w v u g f M K L K e R D s T J S t c e H G G FF E S F 24-31 31-#16 I z G AA BB h H i m N 24-19 19-#12 II F g n P 22-55 55-#20 I E f y KK LL CC p D e x JJ PP DD R H J C d MM T B c w HH NN EE q S U H F G r U D T V b R A v GG V b a u t s C c d W E F g X J a d J L V U Z Y X W Q b f F 22-21 21-#16 II P a E G B N Y E DD EE h K Z r H A M L C K D p CC H K 20-41 41-#20 I B P N J L T U G d e M D F J c N Y HH FF L b S V K p r P H Z C BB GG x J B n z P d K X E a n u s f 20-39 2-#16, 37-#20 I X AA 22-41 24-#20, 14-#16 I Shell Size No. of Contacts Service Rating m j c s V l W R L m g R A T k n j S M M b S G C D Z t F c R L l h B P W C Y j T b n p N 20-16 16-#16 II S D s e F D a f P E G U C a m U G H J B Z m R D H U Z M B X k E g P R E F 18-32 32-#20 I l k T S C A Y X W V X Y t h J D h b K Shell Size No. of Contacts Service Rating S W g l A V C Y j T N X k U W B V B M C f j P C L F V e d G B U R K K A W A L J D F X J C F D W K F B H V c Y L E J F G M D U W E H F X K D C C U b a T G B T N B S Z L H S A R M Y C V T B P P N A N U J E G F 14-15 1-#16, 14-#20 I K C P S E G L B N K R J D M A M P K F A L J j k M K L 24-61 61-#20 I * Layouts are available in shell styles MS3470 and MS3476 only. Alternate Insert Positions Face view, pin insert SHELL SIZE N 8 W 10 X Z 12 Y Contact arrangements requiring reduced diameter for lead-in chamfer on outer row of contact cavities as indicated below. Shell Contact Arrangements Contact Cavities 8 33, 38 12 10 C, G 14 12 A, B, C, D, E, F, G, and H 14 18 A, C, E, G, J, and L 14 19 B, D, F, H, K, and M 16 26 A, B, C, D, E, F, G, H, J, K, L, M, N, P, and R) 18 32 A, B, C, D, E, F,G, H, J, K, L, M, N, P, R, S, and T 22 41 A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S, T, U, V, W, X, and Y 14 16 A, B, C 18 20 22 24 ARRANGEMENT 33 98 6 3 8 10 4 5 12 15 18 19 8 23 26 8 11 32 16 39 41 21 41 55 19 31 61 N W 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 90 90 90 60 45 40 43 17 15 30 54 158 60 180 62 85 238 63 45 16 39 30 30 90 90 POS CODE X Y Z 112 155 180 203 270 292 295 92 90 110 90 165 152 270 119 138 318 144 126 135 135 142 165 225 180 184 155 180 315 180 275 241 222 333 252 225 175 264 226 315 225 270 273 234 270 331 338 340 265 347 333 349 314 324 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 162 MIL-C-26482, Series 2 Connectors PV Thru-Bulkhead Receptacle PV-TBF X 4 HOLES .125/.115 (3.18/2.92) DIA. SIZES 8-22 .152/.142 (3.86/3.61) DIA. SIZES 24 ONLY X POLARIZING GROOVE K A DIA. R (TP) A DIA. PANEL PANEL M FRONT PANEL MOUNTING Shell Size A Dia +_.003 (0.08) REAR PANEL MOUNTING K +_.016 (0.41) .140 RAD. MAX. L L Max. M +_.016 (0.41) R (TP) S Max. S (TYP) X Max. 8 .471 (11.96) .062 (1.57) 1.125 (28.58) .577 (14.66) .594 (15.09) .828 (21.03) .218 (5.54) 10 .588 (14.94) .062 (1.57) 1.125 (28.58) .577 (14.66) .719 (18.26) .954 (24.23) .218 (5.54) 12 .748 (19.00) .062 (1.57) 1.125 (28.58) .577 (14.66) .812 (20.62) 1.047 (26.59) .218 (5.54) 14 .873 (22.17) .062 (1.57) 1.125 (28.58) .577 (14.66) .906 (23.01) 1.141 (28.98) .218 (5.54) 16 .998 (25.35) .062 (1.57) 1.125 (28.58) .577 (14.66) .969 (24.61) 1.234 (31.34) .218 (5.54) 18 1.123 (28.52) .062 (1.57) 1.125 (28.58) .577 (14.66) 1.062 (26.97) 1.328 (33.73) .218 (5.54) 20 1.248 (31.70) .094 (2.39) 1.406 (35.71) .703 (17.86) 1.156 (29.36) 1.453 (36.91) .344 (8.74) 22 1.373 (34.87) .094 (2.39) 1.406 (35.71) .703 (17.86) 1.250 (31.75) 1.578 (40.08) .344 (8.74) 24 1.498 (38.05) .094 (2.39) 1.406 (35.71) .703 (17.86) 1.375 (34.92) 1.703 (43.26) .311 (7.90) Notes: 1) Shell available in conductive (nickel finish) only. 2) Contacts are nonremovable. How to Order - PV-TBF PV-TBF 10 -6 PS W SERIES PREFIX SHELL SIZE INSERT ARRANGEMENTS CONTACT STYLE SERIES PREFIX PV-TBF - ITT Cannon prefix ALTERNATE POLARIZING POSITION CONTACT STYLE SHELL SIZE Pin and socket 8 through 24 ALTERNATE POLARIZING POSITION INSERT ARRANGEMENTS 10-6, 14-19, 16-8, 16-26, 18-32, 20-39, 20- No designation required for normal. Standard MS alternate posistions available. 41, 22-41, 22-55, 24-61. Notes: 1) Shell available in conductive (nickel finish) only. 2) Contacts are nonremovable. 3) Designed to MS3119 configuration and meets the performance requirements of MIL-C-26482 Series 2. Tooling Crimp Tool Insertion/Extraction Tools M22520/1-01 Crimp Tool with M22520/1-02 Turret CBT 520/530 Wire Contact Tools Contact Size Unwired Contact Tools Cannon Pt. No. Cannon Part Number M81969 Part Number Insertion Color Tip Extraction Color Tip Superseded Mil. Pt. No. 20 CIET-20-11 (274-7001-006) M81969/14-11 Red White MS27534-20, MS3447-20, NAS1664-20 274-7007-000 16 CIET-16-03 (274-7002-000) M81969/14-03 Blue White MS27534-16, MS3447-16, NAS1664-16 274-7008-000 12 CIET-12-04 (274-7003-000) M81969/14-04 Yellow White MS27534-12, MS3447-12, NAS1664-12 274-7009-00 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 163 MIL-C-26482, Series 2 Connectors PV Panel Cutouts Jam Nut Receptacle Narrow Flange and Thru-Bulkhead/Wide Flange F DIA. +.010 (0.25) A -.000 (0.00) DIA. + _.005 (+ _.13) R (TYP.) E T DIA. 4 MTG. HOLES Shell Size E + _.005 (0.13) F Dia. + _.005 (0.13) 10 .661 (16.79) .697 (17.70) 12 .824 (20.93) .895 (22.73) 14 .948 (24.08) 1.010 (25.65) 16 1.072 (27.23) 1.135 (28.33) 18 1.197 (30.40) 1.260 (32.00) 20 1.322 (33.58) 1.385 (35.18) 22 1.447 (36.75) 1.510 (38.35) 24 1.572 (39.93) 1.635 (41.53) Flange Front and Rear Mounting Shell Size A Dia. Flange Front and Rear Mounting Mounting Hole R T Dia. Screw Size Shell Size A Dia. Mounting Hole R T Dia. Screw Size 8 .620 (15.75) .594 (18.26) .125 (3.14) #4 10 .740 (18.80) .812 (20.62) .155 (3.97) #6 10 .740 (18.80) .719 (18.26) .125 (3.17) #4 12 .864 (21.95) .938 (23.93) .155 (3.97) #6 12 .864 (21.95) .812 (20.62) .125 (3.17) #4 14 .990 (25.15) 1.031 (26.19) .155 (3.97) #6 14 .990 (25.15) .906 (23.01) .125 (3.17) #4 16 1.118 (28.40) 1.125 (28.58) .155 (3.97) #6 16 1.118 (28.40) .969 (24.61) .125 (3.17) #4 18 1.240 (31.50) 1.203 (30.56) .155 (3.97) #6 18 1.240 (31.50) 1.062 (26.97) .125 (3.17) #4 20 1.366 (34.70) 1.297 (32.94) .155 (3.97) #6 20 1.366 (34.70) 1.156 (29.36) .125 (3.17) #4 22 1.490 (37.85) 1.375(34.92) .155 (3.97) #6 22 1.490 (37.85) 1.250 (31.75) .125 (3.17) #4 24 1.616 (41.05) 1.500 (38.10) .155 (3.97) #6 24 1.616 (41.05) 1.375 (34.92) .155 (3.97) #6 Panel Thickness Shown here are the maximum panel thickness Narrow Flange Receptacle including screw head height allowable to ensure Wide Flange Receptacle .125 (3.18) Max. (backshell clearance for front mount) complete connector operation. .125 (3.18) Max. (backshell clearance for front mount) .118 (3.00mm) maximum for shell size 10 thru 18 (rear mount) .212 (5.38mm maximum for shell size 20 thru 24 (rear mount) .087 (2.21mm) maximum for shell size 10 thru 18 (rear mount) .212 (5.38mm maximum for shell size 20 thru 24 (rear mount) BACKSHELL BACKSHELL COUPLING NUT COUPLING NUT Dummy Stowage Receptacles How to Order PV DESCRIPTION MS DESCRIPTION PVS SERIES PREFIX PVS - ITT Cannon prefix DUMMY RECEPTACLE INDICATOR - 15 -PV CLASS G - Conductive finish (nickel) A - Nonconductive finish (anodized) SHELL SIZE 8 though 24 -15 G 12 MS 3115 -12 G DIA. L 4 HOLES SERIES PREFIX MS - Complies with MIL-C-26482 A DIA MS STANDARD 3115 - Dummy receptacle SHELL SIZE 8 through 24 CLASS L - Conductive finish (nickel) A - Nonconductive finish (anodized) J E (TP) K F (TYP) NOTE: Usable on KPT/KPSE series also. Shell Size A Dia. Max. E (TYP) F Max. G Max. J Max. K Max. 8 .474 (12.04) .594 (15.09) .828 (21.03) .125 (3.18) .493 (12.52) .078 (1.98) 10 .591 (15.01) .719 (18.26) .954 (24.23) .125 (3.18) .493 (12.52) .078 (1.98) 12 .751 (19.08) .812 (20.62) 1.047 (26.59) .125 (3.18) .493 (12.52) .078 (1.98) 14 .876 (22.25) .906 (23.01) 1.141 (28.98) .125 (3.18) .493 (12.52) .078 (1.98) 16 1.001 (25.43) .969 (24.61) 1.234 (31.34) .125 (3.18) .493 (12.52) .078 (1.98) 18 1.126 (28.60) 1.062 (26.97) 1.328 (33.73) .125 (3.18) .493 (12.52) .078 (1.98) 20 1.251 (31.78) 1.156 (29.36) 1.453 (36.91) .125 (3.16) .587 (14.91) .110 (2.79) 22 1.376 (34.95) 1.250 (31.75) 1.578 (40.08) .125 (3.18) .587 (14.91) .110 (2.79) 24 1.501 (38.13) 1.375 (34.92) 1.703 (43.26) .152 (3.86) .620 (15.75) .110 (2.79) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 164 MIL-C-26482, Series 2 Connectors PV Protective Metal Caps Plugs .047 1,19mm) Max. L .169 +_ .008 DIA. (4.29 + _ 0.20) A F H +.500 (12.7) -.250 (6.35) M CHAIN LENGTH Receptacles PVS 80 -12 C A MS 3180 -12 C A SERIES PREFIX PVS - ITT Cannon Prefix MS - Complies with MIL-C-26482 (Series 2) TYPE 80 or 3180 - Plug Cap 81 or 3181 - Receptacle Cap SHELL SIZE 8 thru 24 N R TERMINATION STYLE C - Sash chain (MS approved) N - Sash chain with ring (81 or3181 type only) MS approved .094 2,39mm) Max. FINISH Q B A - Hard anodic, non-conductive (MS approved) G - Nickel, conductive (not MS) (PVS only) H +.500 (12.7) -.250 (6.35) CHAIN LENGTH NOTE: Usable on KPT/KPSE series also. N style used primarily on Jam Nut Receptacle. Shell Size A Max. Dia. B Max. F Max. Dia. H L Max. M Max. N Min. Dia. Q Max. R Max. 8 .474 (12.04) .486 (12.34) .719 (18.26) 3.000 (76.20) .562 (14.27) .399 (10.13) .578 (14.68) .734 (18.64) .562 (14.27) 10 .591 (15.01) .607 (15.42) .844 (21.44) 3.000 (76.20) .562 (14.27) .399 (10.13) .703 (17.86) .859 (21.82) .562 (14.27) 12 .751 (19.08) .766 (19.46) 1.000 (25.40) 3.500 (76.20) .562 (14.27) .399 (10.13) .891 (22.63 1.000 (25.40) .562 (14.27) 14 .876 (22.25) .890 (22.60) 1.125 (28.58) 3.500 (88.90) .562 (14.27) .399 (10.13) 1.016 (25.81) 1.125 (28.58) .562 (14.27) 16 1.001 (25.43) 1.015 (25.78) 1.250 (31.75) 3.500 (88.90) .562 (14.27) .399 (10.13) 1.141 (28.98) 1.250 (31.75) .562 (14.27) 18 1.126 (28.60) 1.141 (28.98) 1.375 (34.93) 3.500 (88.90) .562 (14.27) .399 (10.13) 1.266 (32.16) 1.375 (34.93) .562 (14.27) 20 1.251 (31.78) 1.265 (32.13) 1.500 (38.10) 4.000 (101.60) .625 (15.88) .461 (11.71) 1.391 (35.33) 1.500 (38.10) .562 (14.27) 22 1.376 (34.96) 1.390 (35.31) 1.625 (41.26) 4.000 (101.60) .625 (15.88) .461(11.71) 1.516 (38.51) 1.625 (41.26) .562 (14.27) 24 1.501 (38.13) 1.515 (38.48) 1.750 (44.45) 4.000 (101.60) .658 (16.71) .494 (12.55) 1.641 (41.68) 1.750 (44.45) .602 (15.29) Contacts Thermocouple Contacts Contact Size Color Brands Contact Size Type M39029 Number 1st 2nd 3rd ITT Cannon Alumel Chromal 20 Socket M39029/5-115 Brown Brown Green 031-9174-004 20 Pin 030-1831-000 030-1832-000 20 Pin M39029/4-110 Brown Brown Black 030-9173-006 20 Socket 031-1013-000 031-1014-000 16 Socket M39029/5-116 Brown Brown Blue 031-9206-006 16 Pin M39029/4-111 Brown Brown Brown 030-9205-007 12 Socket M39029/5-118 Brown Brown Grey 031-9186-003 12 Pin M39029/4-113 Brown Brown Orange 030-9185-003 Contacts for printed circuit applications are also available. Consult factory. Wire Hole Fillers Part Number Contact Size Cannon Military 20 225-0070-000 MS27488-20 16 225-0071-000 MS27488-16 12 225-0072-000 MS27488-12 Superseded Mil. Pt. No. MS3187-20 M83723/28-20 MS3187-16 M83723/28-16 MS3187-12 M83723/28-12 Color Code Red Blue Yellow Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 165 MIL-C-26482, Series 2 Connectors PV Assembly Procedures STRIPPING AND CRIMPING 3/16" for #20 CONTACT 9/32" for #16 CONTACT Right 9/32" for #12 CONTACT Wrong 1. Strip wires according to contact size: 3/16" for #20 and 9/32"for #16 and#12. #20 contacts accommodate AWG wire sizes 20, 22, or 24; #16 accommodates 16, 18 or 20; and #12 accommodates 12 or 14. 2. Insert wire into rear of contact. Wire insulation must butt against rear of contact. Wire must be visible thru inspection hole. 3. Use M22520/1-01 crimp tool with proper crimp locator M22520/ 1-02. The color code hand on the contact (red for #20, blue for #16 and yellow for #12) must match the color code of the locator and the insertion tool throughout the crimping and assembly operations. CONTACT INSERTION OPENING COLORED END FOR INSERTION 4. Insert contact and wire into tool jaws. To crimp, squeeze handles together fully until ratchet release and allows handles to expand; otherwise, contact cannot be extracted from tool jaws. Maintain slight insertion pressure on wire while crimping contact to wire. 1. Remove backshell and put wired contacts thru cable clamp opening. 3. Slide back tool on wire shile holding thumb against wire at opening. Wire will slip into tool. NOTE: Socket contacts should be inserted partially into grommet by hand before using insertion tool. 4. With tool pressed against shoulder of contact, starting at the center cavity, insert wired contact and tool into properly identified cavity at rear of plug with firm, even pressure. Do not use excessive pressure. 2. Used colored end of CIET tool for insertion. Place wire into tool at large opening. To facilitate contact insertion, a 6-in. min. free lenght of wire is recommended. 5. When contact bottoms, a slight click can be heard as tines of metal reataining clip snaps into place behind contact shoulder. CONTACT EXTRACTION 6. Withdraw tool from rear of plug. To be sure that contact is locked, pull back lightly on wire. Then remove tool from wire and proceed with other contacts. 7. After all contacts are inserted, fill unwired cavities with sealing plugs (insert head last and leave end protruding for ease of removal), assemble backshell on rear of connector. 1. Remove backshell and slide back along wires to allow access. To extract a contact, use white end of CIET tool. Place wire into tool at large opening. Slide back tool on wire while holding thumb against wire at opening. Wire will slip into tool. COMPLETION BROKEN CIRCLE BREAK 2. Push tool into rear of plug until it bottoms. At this point, tool releases tines on retaining clip so that contact can be extracted. 3. While maintaining slight insertion force on tool, firmly hold wire against serrated shoulder at center of tool and extract both wired contact and tool from plug. 4. Check face of plug or receptacle for proper contact installation. In socket inserts with a large number of contact, cavities are identified in a spiral pattern. A projecting line from the spiral indictates omission of a letter; a broken circle around a cavity indicates transition between capitals and lower case and double letters. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 166