Build a Smarter World Quectel EC25 IoT/M2M-optimized LTE Cat 4 Module Quectel EC25 is a series of LTE category 4 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 11 LTE technology, it delivers 150Mbit/s downlink and 50Mbit/s uplink data rates. Designed in the compact and unified form factor, EC25 is compatible with Quectel UMTS/HSPA+ UC20 module and multi-mode LTE EC20/EC21 module, which allows for flexible migration among them in design and manufacturing. EC25 contains 7 variants: EC25-V, EC25-J, EC25-A, EC25-AU, EC25-AUT, EC25-AUTL and EC25-E. This makes it backwardcompatible with existing EDGE and GSM/GPRS networks, ensuring that it can be connected even in remote areas devoid of 4G or 3G coverage. EC25 supports Qualcomm(R) IZatTM location technology Gen8C Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated GNSS greatly simplifies product design, and provides quicker, more accurate and more dependable positioning. A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB drivers for Windows XP, Windows Vista, Windows 7/8/8.1/10, Linux, Android/eCall) extend the applicability of the module to a wide range of M2M and IoT applications such as industrial router, industrial PDA, rugged tablet PC, video surveillance, and digital signage. Key Benefits LTE category 4 module optimized for M2M and IoT applications LTE Cat 4 Max 150Mbps (DL) Max 50Mbps (UL) Max 42Mbps (DL) Max 5.76Mbps (UL) LCC Package Embedded Abundant Protocols eCall Multi-constellation GNSS USB 2.0 High Speed Interface USB Drivers Quectel Enhanced AT Commands Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment Feature refinements: supports DFOTA*, eCall and DTMF MIMO technology meets demands for data rate and link reliability in modem wireless communication systems Rev.: V1.5 | Status: Released EMAIL US: info@quectel.com VISIT US: www.quectel.com 29.0 mm Quectel EC25 IoT/M2M-optimized LTE Cat 4 Module Variant for EMEA/Korea/Thailand EC25-E: LTE FDD: B1/B3/B5/B7/B8/B20 LTE TDD: B38/B40/B41 WCDMA: B1/B5/B8 GSM: B3/B8 Variants for North America EC25-A: LTE FDD: B2/B4/B12 WCDMA: B2/B4/B5 EC25-V: LTE FDD: B4/B13 Variants for Australia/New Zealand/Taiwan/ Brazil EC25-AU: LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28 LTE TDD: B40 WCDMA: B1/B2/B5/B8 GSM: B2/B3/B5/B8 EC25-AUT: LTE FDD: B1/B3/B5/B7/B28 WCDMA: B1/B5 EC25-AUTL: LTE FDD: B3/B7/B28 Variant for Japan EC25-J: LTE FDD: B1/B3/B8/B18/B19/B26 LTE TDD: B41 WCDMA: B1/B6/B8/B19 Data LTE: LTE FDD: Max 150Mbps (DL)/Max 50Mbps (UL) LTE TDD: Max 130Mbps (DL)/Max 35Mbps (UL) UMTS: DC-HSDPA: Max 42Mbps (DL) HSUPA: Max 5.76Mbps (UL) WCDMA: Max 384Kbps (DL)/Max 384Kbps (UL) GSM: EDGE: Max 296Kbps (DL)/Max 236.8Kbps (UL) GPRS: Max 107Kbps (DL)/Max 85.6Kbps (UL) Voice Speech Codec Modes: HR/FR/EFR/AMR/AMR-WB Echo Arithmetic: Echo Cancellation/Noise Reduction Audio: Digital Audio and VoLTE (Voice over LTE) (Optional) Interfaces USB 2.0 with High Speed up to 480Mbps Digital Audio through PCM (Optional) 32.0 mm 1.8V/3.0V (U)SIM Interface NETLIGHT x 2 (NET_STATUS and NET_MODE) UART x 2 (Main UART and Debug UART) RESET PWRKEY Solder pads for Primary, Rx-diversity and GNSS Antennas ADC x 2 SDIO x 2 (for Wi-Fi and SD card) Enhanced Features SDIO Interface for Wi-Fi Function (Optional) UART/PCM Interfaces for BT4.0 Function* eCall* DTMF Audio Playback/Audio Recording QuecFile* (U)SIM Card Detection DFOTA*: Delta Firmware Upgrade Over the Air GNSS: GPS/GLONASS/BeiDou/Galileo/QZSS (Optional) Electrical Characteristics Output Power: Class 3 (23dBm2dB) for LTE FDD Class 3 (23dBm2dB) for LTE TDD Class 3 (24dBm+1/-3dB) for TD-SCDMA Class 3 (24dBm+1/-3dB) for WCDMA Class E2 (27dBm3dB) for EDGE 850/900MHz Class E2 (26dBm+3/-4dB) for EDGE 1800/1900MHz Class 4 (33dBm2dB) for GSM 850/900MHz Class 1 (30dBm2dB) for GSM 1800/1900MHz Consumption: 20uA @Power off 3mA @Sleep, Typ. 22mA @Idle Sensitivity: LTE B1: -101.5dBm (10M) LTE B2: -101dBm (10M) LTE B3: -101.5dBm (10M) LTE B4: -101dBm (10M) LTE B5: -101dBm (10M) LTE B7: -99.5dBm (10M) LTE B8: -101dBm (10M) LTE B12: -101dBm (10M) LTE B13: -100dBm (10M) LTE B20: -102.5dB (10M) LTE B28: -102dBm (10M) WCDMA B1: -110dBm WCDMA B2: -110dBm WCDMA B4: -110dBm WCDMA B5: -110.5dBm Copyright (c) 2017 Quectel Wireless Solutions Co., Ltd. All Rights Reserved http://www.quectel.com HQ address: 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China Tel: +86 21 51086236 Email: info@quectel.com 2.4mm WCDMA B8: -110.5dBm GSM: -109dBm DCS: -109dBm Software Features USB Serial Driver: Windows XP, Windows Vista, Windows 7/8/8.1/10, Windows CE 5.0/6.0/7.0*, Linux 2.6/3.x/4.1, Android 4.x/5.x/6.x/7.x RIL Driver: Android 4.x/5.x/6.x/7.x NDIS Driver: Windows 7/8/8.1/10 ECM Driver*: Linux 2.6/3.x/4.1 Gobinet Driver: Linux 2.6/3.x/4.1 Linux qmi wwan Driver: 3.x (3.4 or later)/4.1 Protocols: TCP/UDP/PPP/FTP/HTTP/NTP/PING/QMI/ CMUX*/HTTPS*/SMTP*/MMS*/FTPS*/SMTPS*/ SSL*/FILE* General Features 3GPP E-UTRA Release 11 Bandwidth: 1.4/3/5/10/15/20MHz Temperature Range: -40C ~ +85C Dimensions: 32.0mm x 29.0mm x 2.4mm LCC Package Approx. 4.9g Supply Voltage: 3.3V~4.3V, 3.8V Typ. 3GPP TS27.007 and Enhanced AT Commands Approvals RoHS Compliant CE/GCF/Vodafone* (Europe) FCC/PTCRB/AT&T/Verizon* (North America) RCM/Telstra (Australia) JATE/TELEC/DOCOMO*/Softbank (Japan) NCC (Taiwan) KC/SKT/KT*/LGU+* (Korea) IC/Rogers (Canada) NBTC (Thailand) Anatel (Brazil) : LTE B2 of EC25-AU Does Not Support Rx-diversity * Under Development