www.clare.com
DS-PLA192-R04 1
PLA192
Single Pole, Normally Open
OptoMOS® Relay
RoHS
2002/95/EC e3
Pb
Part # Description
PLA192 6-Pin DIP (50/Tube)
PLA192S 6-Pin Surface Mount (50/Tube)
PLA192STR 6-Pin Surface Mount (1000/Reel)
Parameters Ratings Units
Blocking Voltage 600 VP
Load Current 150 mA
Max On-resistance 22 Ω
Applications
Features
Description
Approvals
Ordering Information
Pin Configuration
The PLA192 is a single-pole, normally open
(1-Form-A) solid state relay that uses optically
coupled relay technology to provide an enhanced
5000Vrms isolation barrier between the input and the
output of the relay.
The efficient MOSFET switches use Clare's patented
OptoMOS architecture while the optically coupled
output is controlled by a highly efficient GaAlAs
infrared LED.
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment: Patient/Equipment Isolation
• Aerospace
• Industrial Controls
• 5000Vrms Input/Output Isolation
• Small 6-Pin DIP Package
• Low Drive Power Requirements
(TTL/CMOS Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
Switching Characteristics of
Normally Open Devices
Form-A
IF
ILOAD
10%
90%
ton toff
1
3
2
4
5
6
+ Control
- Control
Do Not Use
Load
Do Not Use
Load
AC/DC Configuration
1
3
2
4
5
6
+ Control
- Control
Do Not Use
+ Load
- Load
DC Only Configuration
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
www.clare.com
2R04
PLA192
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Parameter Min Max Units
Blocking Voltage - 600 VP
Reverse Input Voltage - 5 V
Input Control Current - 50 mA
Peak (10ms) - 1 A
Input Power Dissipation 1- 150 mW
Total Package Dissipation 2- 800 mW
Isolation Voltage, Input to Output 5000 - Vrms
Operational Temperature -40 +85 ºC
Storage Temperature -40 +125 ºC
1 Derate linearly 1.33 mW / ºC
2 Derate linearly 6.67 mW / ºC
Absolute Maximum Ratings @ 25ºC
Electrical Characteristics @ 25ºC
Parameters Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current
Continuous, AC/DC Configuration - IL
- - 150 mA
Continuous, DC Configuration - - - 220
Peak t=10ms ILPK - - 400
On-Resistance
AC/DC Configuration IL=150mA RON
- 13.3 22 Ω
DC Configuration IL=220mA - 4.15 8
Off-State Leakage Current VL=600VPILEAK -- 1 μA
Switching Speeds
Turn-On IF=5mA, VL=10V ton -- 5 ms
Turn-Off toff -- 5
Output Capacitance VL=50V, f=1MHz COUT -50 - pF
Input Characteristics
Input Control Current IL=100mA IF- 0.22 5 mA
Input Dropout Current - IF0.2 0.21 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR--10 μA
Common Characteristics
Input to Output Capacitance - CI/O -3 - pF
PLA192
www.clare.com 3
R04
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
Typical Turn-On Time
(N=50, IF=5mA, IL=100mADC , TA=25ºC)
1.7 1.9 2.11.6 1.8 2.0
Turn-On (ms)
Device Count (N)
0
5
10
15
25
20
30
35
Typical Turn-Off Time
(N=50, IF=5mA, IL=100mADC , TA=25ºC)
0.26 0.32 0.380.350.290.23
Turn-Off (ms)
Device Count (N)
35
30
25
20
15
10
5
0
On Resistance (Ω)
13.1 13.2 13.3 13.4 13.5 13.6
Device Count (N)
0
5
10
15
20
25
30
35
40
Typical On-Resistance Distribution
(N=50, IF=5mA, IL=150mA, TA=25ºC)
LED Current (mA)
0.20 0.21 0.22 0.23 0.24 0.25 0.26
Device Count (N)
0
5
10
15
20
25
30
Typical IF for Switch Operation
(N=50, IL=100mA, TA=25ºC)
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
30
25
20
15
10
5
0
710 730 750700 720 740
Blocking Voltage (VP)
Device Count (N)
On Resistance (Ω)
4.05 4.10 4.15 4.20 4.25 4.30
Device Count (N)
0
5
10
15
20
25
30
DC-Only On-Resistance Distribution
(N=50, IF=5mA, IL=220mA, TA=25ºC)
Typical LED Forward Voltage Drop
(N=50, IF=5mA, TA=25ºC)
35
30
25
20
15
10
5
0
1.25 1.26 1.27 1.28 1.29
LED Forward Voltage Drop (V)
Device Count (N)
Typical Turn-On vs. LED Forward Current
(IL=150mADC , TA=25ºC)
Forward Current (mA)
Turn-On (ms)
05 1015202530354045
3.0
2.7
2.4
2.1
1.8
1.5
1.2
0.9
0.6
0.3
050
Typical Turn-Off vs. LED Forward Current
(IL=150mADC , TA=25ºC)
Forward Current (mA)
Turn-On (ms)
05 10152025303540
1.0
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (ºC)
LED Forward Voltage Drop (V)
1.8
1.6
1.4
1.2
1.0
0.8
-40 -20 0 20 40 60 80 120100
I
F
=5mA
Typical Turn-On vs. Temperature
(IL=100mADC)
Temperature (ºC)
Turn-On (ms)
-40
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 120100
IF=5mA
Typical Turn-Off vs. Temperature
(IL=100mADC)
Temperature (ºC)
Turn-Off (ms)
-40
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0-20 0 20 40 60 80 100
IF=5mA
www.clare.com
4R04
PLA192
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Current (mA)
0.15
0.17
0.19
0.21
0.23
0.25
0.27
Typical IF for Switch Operation
vs. Temperature
(IL=100mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
On-Resistance (Ω)
8
10
12
14
16
18
Typical On-Resistance
vs. Temperature
(IF=5mA, IL=150mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
On-Resistance (Ω)
1
2
3
4
5
6
7
Typical DC-Only On-Resistance
vs. Temperature
(IF=5mA, IL=220mA)
Voltage(V)
0123
Current(A)
-0.15
-0.10
-0.05
0.00
0.05
0.10
0.15
Typical Load Current vs. Load Voltage
AC/DC Configuration
(IF=5mA, TA=25ºC)
-3 -2 -1
Voltage(V)
0.0 0.2 0.4 0.6 0.8 1.0 1.2
Current(A)
0.00
0.05
0.10
0.15
0.20
0.25
Typical Load Current vs. Load Voltage
DC-Only Configuration
(IF=5mA, TA=25ºC)
Maximum Load Current
vs. Temperature
Temperature (ºC)
Load Current (mA)
240
220
200
180
160
140
120
-40 -20 0 20 40 60 80 120100
I
F
=10mA
I
F
=5mA
I
F
=10mA
I
F
=5mA
DC Configuration
AC/DC Configuration
Typical Blocking Voltage
vs. Temperature
Temperature (ºC)
Blocking Voltage (VP)
-40
770
760
750
740
730
720
710
700 -20 0 20 40 60 80 100
Typical Leakage vs. Temperature
Measured across Pins 4&6
(VL=600V)
Temperature º(C)
Leakage (μA)
-40
0.06
0.05
0.04
0.03
0.02
0.01
0
-20 0 20 40 60 80 100
Energy Rating Curve
(IF=5mA, TA=25ºC)
Time
Load Current (A)
10μs
1.2
1.0
0.8
0.6
0.4
0.2
0
1ms100μs 100ms 1s
10ms 10s 100s
PLA192
www.clare.com 5
R04
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all
of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry
standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to
the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled
according to the limitations and information in that standard as well as to any limitations set forth in the information or
standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
PLA192 / PLA192S MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
PLA192 / PLA192S 250ºC for 30 seconds
Board Wash
Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is
acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated
products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.
Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy
should not be used.
RoHS
2002/95/EC e3
Pb
www.clare.com
6R04
PLA192
MECHANICAL DIMENSIONS
Dimensions
mm
(inches)
PCB Hole Pattern
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
5.080 ± 0.127
(0.200 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.)
0.254 ± 0.0127
(0.010 ± 0.0005)
9.144 ± 0.508
(0.360 ± 0.020)
7.239 TYP
(0.285 TYP)
7.620 ± 0.254
(0.300 ± 0.010)
3.302 ± 0.051
(0.130 ± 0.002) 4.064 TYP
(0.160 TYP)
0.457 ± 0.076
(0.018 ± 0.003)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
1.651 ± 0.254
(0.065 ± 0.010)
Dimensions
mm
(inches)
PCB Land Pattern
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
4.445 ± 0.254
(0.175 ± 0.010)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
9.524 ± 0.508
(0.375 ± 0.020) 6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
1.651 ± 0.254
(0.065 ± 0.010)
1.651 ± 0.254
(0.065 ± 0.010)
PLA192
PLA192S
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-PLA192-R04
©Copyright 2010, Clare, Inc.
All rights reserved. Printed in USA.
8/13/2010
For additional information please visit our website at: www.clare.com
7
PLA192
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Dimensions
mm
(inches)
Embossment
Embossed
Carrier
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=16.00
(0.63)
B0 = 10.10
(0.398)
A0 = 10.10
(0.398)
P = 12.00
(0.472)
K1 = 3.80
(0.15)
K0 = 4.90
(0.19)
User Direction of Feed
PLA192S Tape & Reel
