1 of 1 http://www.chauvin-arnoux.com/Produit/Famille_Print.asp?idFam=19... MX 9030 NEW PRODUCT The perfect companion for your Class 1 oscilloscopes! An important accessory for all Class 1 oscilloscopes connected to the earth, the MX 9030 differential probe can be used autonomously. It enables differential input voltage to be attenuated and converted to low voltage, available on the BNC output. The battery-powered MX 9030 works with banana measurement leads that clip onto the back of the casing. Technical specifications: Bandwidth: 30 MHz Voltage ratio: 1/20 and 1/200 Input: 1 differential channel/adjustable banana leads Differential input voltage range: 0.1V to 600V Input impedance: 2M - 6pF Common mode rejection: 80dB to 50 Hz, 50dB to 1 MHz Oscilloscope output: 3V loaded with 1 M, BNC cable, approx. 1.10m in length Supply/battery life: one 6LF22-type 9V battery/18 hours Safety/EMC: IEC 61010-1, Cat.IV - 600V, EMC in compliance with NF EN 61326-1 standard Dimensions: 163 x 62 x 40 mm Weight: 195g with battery FAITES VOTRE CHOIX p_Caddie = Faux p_Caddie = Faux 1x30MHZ HANDHELD DIFFERENTIAL PROBE 1x30MHZ HANDHELD DIFFERENTIAL PROBE 24/06/2009 09:37