MX 9030
NEW PRODUCT
The perfect companion for your Class 1
oscilloscopes!
An important accessory for all Class 1 oscilloscopes connected to the
earth, the MX 9030 differential probe can be used autonomously. It
enables differential input voltage to be attenuated and converted to
low voltage, available on the BNC output.
The battery-powered MX 9030 works with banana measurement leads
that clip onto the back of the casing.
Technical specifications:
Bandwidth: 30 MHz
Voltage ratio: 1/20 and 1/200
Input: 1 differential channel/adjustable banana leads
Differential input voltage range: ± 0.1V to ± 600V
Input impedance: 2MΩ - 6pF
Common mode rejection: 80dB to 50 Hz, 50dB to 1 MHz
Oscilloscope output: ±3V loaded with 1 MΩ, BNC cable, approx.
1.10m in length
Supply/battery life: one 6LF22-type 9V battery/18 hours
Safety/EMC: IEC 61010-1, Cat.IV - 600V, EMC in compliance with NF
EN 61326-1 standard
Dimensions: 163 x 62 x 40 mm
Weight: 195g with battery
FAITES VOTRE CHOIX
p_Caddie = Faux
p_Caddie = Faux
1x30MHZ HANDHELD DIFFERENTIAL PROBE
1x30MHZ HANDHELD DIFFERENTIAL PROBE
http://www.chauvin-arnoux.com/Produit/Famille_Print.asp?idFam=19...
1 of 1 24/06/2009 09:37
