WLAN/WIFI/BLUETOOTH COMPACT CHIP ANTENNA AMCA31-2R450 G-S1F-T AMCA31-101-2R450G-S1F-T3 Pb FEATURES 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL = MSL-1 APPLICATIONS * 2450MHz, bandwidth 90MHz * Small size - 3.2 x 1.6 x 1.2mm (0.125 x 0.62 x 0.047 inch) * Gain 0.5dBi (Peak) / -1dBi (Average) * VSWR <2:1 * Non ground mounting type * Power handling 3W max * Matched to 50 Ohm * Suitable for RoHS compliant reflow * * * * * Wireless application - Bluetooth / WiFi (2.445GHz) IoT devices Bluetooth headsets or ear pieces Industrial automation Alternative to larger PCB solution ELECTRICAL CHARACTERISTICS Item Frequency Bandwidth Peak Gain Average Gain VSWR Impedance Power Capability Operating Temperature Range Spec 2450MHz 90MHz 0.5 dBi typ. -1 dBi typ <2:1 50 Ohm 3W max -40C to + 85C PART IDENTIFICATION AMCA31-101-2R450G-S1F-T3 Packaging Blank: Bulk or Cut Tape T3 : T/R 3000pcs per reel LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 03.28.2018 ABRACON IS ISO9001-2008 CERTIFIED WLAN/WIFI/BLUETOOTH COMPACT CHIP ANTENNA AMCA31-2R450 G-S1F-T AMCA31-101-2R450G-S1F-T3 Pb 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL = MSL-1 APPLICATION TEST CIRCUIT & PCB LAYOUTS - DEFAULT LAYOUTS Evaluation Board PCB Layout Shows the PCB layout highlighting the Ground and No Ground areas and trace feed line to the chip antenna. LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 03.28.2018 ABRACON IS ISO9001-2008 CERTIFIED WLAN/WIFI/BLUETOOTH COMPACT CHIP ANTENNA AMCA31-2R450 G-S1F-T AMCA31-101-2R450G-S1F-T3 Pb 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL = MSL-1 MATCHING CIRCUIT AND REFERENCE VALUES Chip antenna should be matched with the environment of final products. Normally this process can be done with capacitor or inductor. Electrical Performance with matching circuit: Network Analyzer Passive Test with Network Analyzer Range of Matching Component Values Component Description Value Antenna AMCA31-101-2R450G-S1F-T3 ---- *Series C *Shunt C Series L Shunt L 0.5 ~ 10 pF 33pF, 100 pF 1.0 ~ 6nH 1.0 ~ 6nH Capacitor Inductor *Series: Connected between antenna and feeding line in series. *Shunt: Connected between antenna and feeding line in parallel Note: Recommendation is to pre-place the -type circuit layout circuit which will offer full flexibility to match the antenna to 50 Ohm in the final product layout with one of the match configurations below. Depending on matching, NC will apply to certain components. Range of Matching Configurations LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 03.28.2018 ABRACON IS ISO9001-2008 CERTIFIED WLAN/WIFI/BLUETOOTH COMPACT CHIP ANTENNA AMCA31-2R450 G-S1F-T AMCA31-101-2R450G-S1F-T3 Pb 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL = MSL-1 ANTENNA RESPONSE - SMITH CHART OF MATCH AND RETURN LOSS S11 LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 03.28.2018 ABRACON IS ISO9001-2008 CERTIFIED WLAN/WIFI/BLUETOOTH COMPACT CHIP ANTENNA AMCA31-2R450 G-S1F-T AMCA31-101-2R450G-S1F-T3 Pb 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL = MSL-1 OUTSIDE DIMENSIONS AND PCB LAND DRAWING (Dimensions in mm) Series AMCA31 A 3.20.2 This is the feed-line to the Antenna and should be matched to 50 Ohms based upon the PCB dielectric parameters. B 1.60.2 C D E 1.20.2 0.50.2 1.60.2 F 0.80.2 G 0.80.2 H 2.60.2 I 3.50.2 TERMINAL CONFIGURATION Terminal identifications Table (7.1) - Terminal Configuration No Pad 1 Terminal Name Feed Point LLC No Terminal Name Pad 2 NC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 03.28.2018 ABRACON IS ISO9001-2008 CERTIFIED WLAN/WIFI/BLUETOOTH COMPACT CHIP ANTENNA AMCA31-2R450 G-S1F-T AMCA31-101-2R450G-S1F-T3 Pb 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL = MSL-1 REFLOW PROFILE : * Preheat condition: 150 ~200 /60~120C sec. * Allowed time above 217C: 60~90sec. * Max temp: 260C * Max time at max temp: 10sec. * Solder paste: Sn/3.0Ag/0.5Cu * Allowed Reflow time: 2x max [Note: The reflow profile in the above table is only for qualification and is not meant to specify board assembly profiles. Actual board assembly profiles must be based on the customer's specific board design, solder paste and process, and should not exceed the parameters as the Reflow profile shows.] LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 03.28.2018 ABRACON IS ISO9001-2008 CERTIFIED WLAN/WIFI/BLUETOOTH COMPACT CHIP ANTENNA AMCA31-2R450 G-S1F-T AMCA31-101-2R450G-S1F-T3 Pb 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL = MSL-1 MANUAL SOLDERING Pre-heating Temperature: 120C, 60 ~ 300 sec. * * * * * * * Iron soldering power: Max.30W. Pre-heating: 150 / 60 sec. C. Soldering Tip temperature: 350 Max. C. Soldering time: 3 sec Max. Solder paste: Sn/3.0Ag/0.5Cu. Max 1 times for iron soldering. Soldering Temperature: 340C5C, 5sec max per each terminal. [Note: Take care not to apply the tip of the soldering iron to the terminal electrodes.] PACKAGING: T3=3000 UNITS PER REEL Package Handling and Storage Precautions * The solderability of the external electrode may be deteriorated if packages are stored where they are exposed to high humidity. Package must be stored at 40 Cor less and 70% RH or less. * The solderability of the external electrode may be deteriorated if packages are stored where they are exposed to dust of harmful gas (e.g. HCl, sulfurous gas of H2S). * Packaging material may be deformed if package are stored where they are exposed to heat of direct sunlight. * Solderability specified in Para 9.4 shall be guaranteed for 6 months from the date of delivery on condition that they are stored at the environment specified in Para 1.1. For those parts, which passed more than 6 months shall be checked solder-ability before use. LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 03.28.2018 ABRACON IS ISO9001-2008 CERTIFIED WLAN/WIFI/BLUETOOTH COMPACT CHIP ANTENNA AMCA31-2R450 G-S1F-T AMCA31-101-2R450G-S1F-T3 Pb 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL = MSL-1 TAPE DIMENSIONS: Dimensions: mm W P1 E F B0 8.00.10 4.00.10 1.750.10 3.500.15 3.500.10 D0 1.50 +0.10 / -0.0 4.00.10 P0 1.500.10 K0 1.800.10 A0 0.220.10 t REEL DIMENSIONS: Dimensions: mm LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 03.28.2018 ABRACON IS ISO9001-2008 CERTIFIED WLAN/WIFI/BLUETOOTH COMPACT CHIP ANTENNA AMCA31-2R450 G-S1F-T AMCA31-101-2R450G-S1F-T3 Pb 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL = MSL-1 Mounting Direction of Tape on Reel Note: The sprocket holes are to the right as the tape is pulled toward the user CAUTIONS Ultrasonic cleaning Ultrasonic vibration may cause deterioration & destruction of the component. Please avoid ultrasonic cleaning. Soldering Only leads of the component may be soldered. Please avoid soldering to any other part of the component, such as the Ag patterning as this will change the performance of the antenna. Handling & Packaging See "Package Handling" for further details LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 03.28.2018 ABRACON IS ISO9001-2008 CERTIFIED