5KP SERIES TRANSIENT VOLTAGE
SUPPRESSOR
V
BR
: 5.0 - 180 Volts
P
PK
: 5000 Watts
FEATURES :
* 5000W Peak Pulse Power
* Excellent clamping capability
* Low incremental surge resistance
* Fast response time : typically less
then 1.0 ps from 0 volt to V
BR(min.)
* Typical I
R
less then 1µA above 10V
MECHANICAL DATA
* Case : Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Cathode polarity band
* Mounting position : Any
* Weight : 2.73 grams
DEVICES FOR BIPOLAR APPLICATIONS
For Bi-directional use C or CA Suffix
Electrical characteristics apply in both directions
MAXIMUM RATINGS
Rating at 25 °C ambient temperature unless otherwise specified.
Rating Symbol Value Unit
Peak Pulse Power Dissipation at tp = 1ms
(Note 1, Fig. 4)
Steady State Power Dissipation at TL = 75 °C
Lead Lengths 0.375", (9.5mm) (Note 2)
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
Operating and Storage Temperature Range TJ, TSTG - 55 to + 150 °C
Note :
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25
°
C per Fig. 1
(2) Mounted on Copper Leaf area of 0.79 in
2
(20mm
2
).
(3) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.
UPDATE : SEPTEMBER 6, 2001
PPK Minimum 5000 Watts
8.0 Watts
IFSM 400 Amps.
PD
0.053 (1.35)
0.050 (1.27)
0.250 (6.4)
0.235 (6.0)
AR - L
Dimensions in inches and ( millimeter )
1.00 (25.4)
MIN.
0.410 (10.4)
0.380 (9.70)
ELECTRICAL CHARACTERISTICS
Rating at = 25 °C ambient temperature unless otherwise specified
Breakdown Voltage @ ITReverse Maximum Maximum Maximum Maximum
( Note 1 ) Stand off Reverse Leakage Peak Pulse Clamping Voltage
Voltage @ VRM Current (Note2) Voltage @ IPPM Temperature
VBR (V) ITVRWM IRIPPM VCVariation of
Min. Max. (mA) (V) (µA) (A) (V) VBR (mV/°C)
5KP5.0 6.40 7.30 50 5.0 5000 520 9.60 4.0
5KP5.0A 6.40 7.00 50 5.0 5000 543 9.20 4.0
5KP6.0 6.67 8.15 50 6.0 5000 439 11.4 4.0
5KP6.0A 6.67 7.37 50 6.0 5000 485 10.3 4.0
5KP6.5 7.22 8.82 50 6.5 2000 407 12.3 4.0
5KP6.5A 7.22 7.98 50 6.5 2000 447 11.2 4.0
5KP7.0 7.78 9.51 5.0 7.0 1000 378 13.3 5.0
5KP7.0A 7.78 8.60 5.0 7.0 1000 417 12.0 5.0
5KP7.5 8.33 10.2 5.0 7.5 250 350 14.3 6.0
5KP7.5A 8.33 9.21 5.0 7.5 250 388 12.9 6.0
5KP8.0 8.89 10.9 5.0 8.0 150 333 15.0 6.0
5KP8.0A 8.89 9.83 5.0 8.0 150 367 13.6 6.0
5KP8.5 9.44 11.5 5.0 8.5 50 314 15.9 7.0
5KP8.5A 9.44 10.4 5.0 8.5 50 347 14.4 7.0
5KP9.0 10.0 12.2 5.0 9.0 20 295 16.9 8.0
5KP9.0A 10.0 11.1 5.0 9.0 20 325 15.4 8.0
5KP10 11.1 13.6 5.0 10 15 266 18.8 9.0
5KP10A 11.1 12.3 5.0 10 15 294 17.0 9.0
5KP11 12.2 14.9 5.0 11 10 249 20.1 10
5KP11A 12.2 13.5 5.0 11 10 274 18.2 10
5KP12 13.3 16.3 5.0 12 10 227 22.0 11
5KP12A 13.3 14.7 5.0 12 10 251 19.9 11
5KP13 14.4 17.6 5.0 13 10 210 23.8 12
5KP13A 14.4 15.9 5.0 13 10 232 21.5 12
5KP14 15.6 19.1 5.0 14 10 194 25.8 13
5KP14A 15.6 17.2 5.0 14 10 215 23.2 13
5KP15 16.7 20.4 5.0 15 10 188 26.9 15
5KP15A 16.7 18.5 5.0 15 10 206 24.4 15
5KP16 17.8 21.8 5.0 16 10 176 28.8 18
5KP16A 17.8 19.7 5.0 16 10 192 26.0 16
5KP17 18.9 23.1 5.0 17 10 164 30.5 19
5KP17A 18.9 20.9 5.0 17 10 181 27.6 18
5KP18 20.0 24.4 5.0 18 10 155 32.2 20
5KP18A 20.0 22.1 5.0 18 10 172 29.2 19
5KP20 22.2 27.1 5.0 20 10 139 35.8 24
5KP20A 22.2 24.5 5.0 20 10 154 32.4 22
5KP22 24.4 29.8 5.0 22 10 127 39.4 27
5KP22A 24.4 26.9 5.0 22 10 141 35.5 24
5KP24 26.7 32.6 5.0 24 10 116 43.0 30
5KP24A 26.7 29.5 5.0 24 10 128 38.9 27
5KP26 28.9 35.3 5.0 26 10 107 46.6 33
5KP26A 28.9 31.9 5.0 26 10 119 42.1 29
5KP28 31.1 38.0 5.0 28 10 99 50.1 34
5KP28A 31.1 34.4 5.0 28 10 110 45.4 30
5KP30 33.3 40.7 5.0 30 10 93 53.5 38
5KP30A 33.3 36.8 5.0 30 10 103 48.4 35
5KP33 36.7 44.9 5.0 33 10 85 59.0 41
5KP33A 36.7 40.6 5.0 33 10 94 53.3 38
TYPE
ELECTRICAL CHARACTERISTICS
Rating at = 25 °C ambient temperature unless otherwise specified
Breakdown Voltage @ ITReverse Maximum Maximum Maximum Maximum
( Note 1 ) Stand off Reverse Leakage Peak Pulse Clamping Voltage
Voltage @ VRM Current (Note2) Voltage @ IPPM Temperature
VBR (V) ITVRWM IRIPPM VCVariation of
Min. Max. (mA) (V) (µA) (A) (V) VBR (mV/°C)
5KP36 40.0 48.9 5.0 36 10 78 64.3 45
5KP36A 40.0 44.2 5.0 36 10 86 58.1 40
5KP40 44.4 54.3 5.0 40 10 70 71.4 50
5KP40A 44.4 49.1 5.0 40 10 78 64.5 45
5KP43 47.8 58.4 5.0 43 10 65 76.7 54
5KP43A 47.8 52.8 5.0 43 10 72 69.4 49
5KP45 50.0 61.1 5.0 45 10 62 80.3 57
5KP45A 50.0 55.3 5.0 45 10 69 72.7 51
5KP48 53.3 65.2 5.0 48 10 58 85.5 62
5KP48A 53.3 58.9 5.0 48 10 65 77.4 55
5KP51 56.7 69.3 5.0 51 10 55 91.1 65
5KP51A 56.7 62.7 5.0 51 10 61 82.4 60
5KP54 60.0 73.3 5.0 54 10 52 96.3 70
5KP54A 60.0 66.3 5.0 54 10 57 87.1 64
5KP58 64.4 78.7 5.0 58 10 49 103 77
5KP58A 64.4 71.2 5.0 58 10 53 94 69
5KP60 66.7 81.5 5.0 60 10 47 107 79
5KP60A 66.7 73.7 5.0 60 10 52 97 70
5KP64 71.1 96.9 5.0 64 10 44 114 85
5KP64A 71.1 78.6 5.0 64 10 49 103 75
5KP70 77.6 95.1 5.0 70 10 40 125 93
5KP70A 77.6 86.0 5.0 70 10 44 113 84
5KP75 83.3 102 5.0 75 10 37 134 100
5KP75A 83.3 92.1 5.0 75 10 41 121 90
5KP78 86.7 106 5.0 78 10 36 139 104
5KP78A 86.7 95.8 5.0 78 10 40 126 94
5KP85 94.4 115 5.0 85 10 33 151 113
5KP85A 94.4 104 5.0 85 10 36 137 102
5KP90 100 122 5.0 90 10 31 160 120
5KP90A 100 111 5.0 100 10 34 146 109
5KP100 111 136 5.0 100 10 28 179 134
5KP110 122 149 5.0 110 10 26 196 147
5KP120 133 163 5.0 120 10 23 215 158
5KP150 166 204 5.0 150 10 19 268 200
5KP180 200 244 5.0 180 10 15 320 240
Note:
( 1 ) VBR measured after IT applied for 300 µs., IT = square wave pulse or equivalent.
( 2 ) Surge Current waveform per Fig. 3 and Derate per Fig. 2
( 3 ) VF = 3.5 Volts max. for devices of VR < 100 V, and VF = 5 Volts max. for devices of VR > 100 V.
( 4 ) For Bi-directional devices having VR of 10 Volts and under the IR limit is doubled.
TYPE
RATING AND CHARACTERISTIC CURVES ( 5KP SERIES )
FIG.1 - PULSE DERATING CURVE
PEAK FORWARD SURGE CURRENT
0 25 50 75 100 125 150 175
Ta, AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz
FIG.3 - STEADY STATE POWER DERATING FIG.4 - PEAK PULSE POWER RATING CURVE
FIG.5 - PULSE WAVEFORM
0 1.0 2.0 3.0 4.0
80
60
40
20
120
8 100
10
400
0
600
0
300
200
100
2
6
0
0.1
4
1.0
tp, PULSE WIDTH
PEAK FORWARD SURGE
CURRENT, AMPERES
PEAK PULSE POWER OR CURRENT
DERATING IN PERCENTAGE, %
PPK , PEAK POWER (kW)
100 500
10
20
60
1
2
4
6
40
100
100 125 1750 25 50 75 150
0.1µs1.0µs10µs100µs10ms
1.0ms
200
TL, LEAD TEMPERATURE (°C)
8.3 ms SINGLE HALF SINE WAVE
JEDEC METHOD
PD, STEADY STATE POWER DISSIPATION
(WATTS)
50
100
0
tr = 10µs
Peak Value
IPPM
Ta=25 °C
Pulse Width (td) is defined
as that point where the peak
current decays to 50%
of IPPM
tp
10x1000 µs Waveform
as defined by R.E.A.
Half Value - IPPM
2
T, TIME(ms)
PEAK PULSE CURRENT
IPPM , %