FLASHPRO6 - MICROSEMI - Datasheet.Live

Kit Contents - FLASHPRO6

Quantity Description

1 FlashPro6 programmer standalone unit

1 USB 3.0 A to micro-B cable

1 FlashPro6 10-pin ribbon cable

1 Quickstart card

Hardware Installation

After installing the software successfully, connect one end of the USB cable to the FlashPro6 device

programmer and the other end to the USB port of the PC. Use the wizard to install the driver utomatically

cannot ﬁnd the drivers automatically, then ensure you have properly installed the FlashPro software prior

to installing the hardware.

Note: FlashPro6 does not use pin 4 and pin 7 of the JTAG connector, which is different from FlashPro4

and FlashPro5. For FlahsPro6, pin 4 and pin 7 of the JTAG header must not be connected.

Common Issues

If the On LED does not light up after FlashPro6 driver installation, the driver might not be installed

correctly and you must troubleshoot the installation. For more information, see the FlashPro Software

and Hardware Installation Guide and the “Known Issues and Workarounds” section of the FlashPro

Software Release Notes.

FlashPro6 Device Programmer Quickstart Card

Microsemi, a wholly owned subsidiary of Microchip Technology Inc. (Nasdaq: MCHP), offers a comprehensive portfolio of semiconductor

and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance

and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and

synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete

components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions;

Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Learn more at www.microsemi.com.

Microsemi Headquarters

One Enterprise, Aliso Viejo, CA 92656 USA

Within the USA: +1 (800) 713-4113

Outside the USA: +1 (949) 380-6100

Sales: +1 (949) 380-6136

Fax: +1 (949) 215-4996

email: sales.support@microsemi.com

www.microsemi.com

Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose,

nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold

by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance speciﬁcations are

believed to be reliable but are not veriﬁed, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any

end-products. Buyer shall not rely on any data and performance speciﬁcations or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine

suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire

risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights,

whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi

reserves the right to make any changes to the information in this document or to any products and services at any time without notice.

Corporation. All other trademarks and service marks are the property of their respective owners. 

50200699 11/19

FlashPro6 Device Programmer Quickstart Card

Software and Licensing

Libero® SoC PolarFire Design Suite offers high productivity with its comprehensive, easy-to-learn,

easy-to-adopt development tools for designing with Microsemi’s low power Flash FPGAs and SoC. The

suite integrates industry standard Synopsys Synplify Pro® synthesis and Mentor Graphics ModelSim®

simulation with best-in-class constraints management and debug capabilities.

Download the latest Libero SoC PolarFire release:

https://www.microsemi.com/product-directory/design-resources/1750-libero-soc#downloads

Documentation Resources

For more information about the FlashPro6 Device Programmer, see the documentation at https://www.

microsemi.com/product-directory/programming/4977-ﬂashpro#documents.

Support

Technical support is available online at https://soc.microsemi.com/Portal/Default.aspx.

Microsemi sales ofﬁces, including representatives and distributors are located worldwide. To ﬁnd your local

representative, go to www.microsemi.com/salescontacts