SiHP12N60E www.vishay.com Vishay Siliconix E Series Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) at TJ max. * Low figure-of-merit (FOM) Ron x Qg 650 RDS(on) max. at 25 C () VGS = 10 V Qg max. (nC) * * * * * 0.38 58 Qgs (nC) 6 Qgd (nC) 13 Configuration Single APPLICATIONS D * * * * Server and telecom power supplies Switch mode power supplies (SMPS) Power factor correction power supplies (PFC) Lighting - High-intensity discharge (HID) - Fluorescent ballast lighting * Industrial - Welding - Induction heating - Motor drives - Battery chargers - Renewable energy - Solar (PV inverters) TO-220AB G G D Low input capacitance (Ciss) Reduced switching and conduction losses Ultra low gate charge (Qg) Available Avalanche energy rated (UIS) Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 S S N-Channel MOSFET ORDERING INFORMATION Package Lead (Pb)-free Lead (Pb)-free and Halogen-free TO-220AB SiHP12N60E-E3 SiHP12N60E-GE3 ABSOLUTE MAXIMUM RATINGS (TC = 25 C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS 600 Gate-Source Voltage VGS 30 Continuous Drain Current (TJ = 150 C) VGS at 10 V TC = 25 C TC = 100 C Pulsed Drain Current a ID UNIT V 12 7.8 A IDM 27 1.2 W/C Single Pulse Avalanche Energy b EAS 117 mJ Maximum Power Dissipation PD 147 W TJ, Tstg -55 to +150 C Linear Derating Factor Operating Junction and Storage Temperature Range Drain-Source Voltage Slope TJ = 125 C Reverse Diode dV/dt d Soldering Recommendations (Peak Temperature) c for 10 s dV/dt 70 5 300 V/ns C Notes a. Repetitive rating; pulse width limited by maximum junction temperature. b. VDD = 50 V, starting TJ = 25 C, L = 11.6 mH, Rg = 25 , IAS = 4.5 A. c. 1.6 mm from case. d. ISD ID, dI/dt = 100 A/s, starting TJ = 25 C. S15-0277-Rev. D, 23-Feb-15 Document Number: 91479 1 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiHP12N60E www.vishay.com Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER SYMBOL TYP. MAX. Maximum Junction-to-Ambient RthJA - 62 Maximum Junction-to-Case (Drain) RthJC - 0.85 UNIT C/W SPECIFICATIONS (TJ = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage VDS Temperature Coefficient Gate-Source Threshold Voltage (N) VDS VGS = 0 V, ID = 250 A 600 - - V VDS/TJ Reference to 25 C, ID = 1 mA - 0.71 - V/C VGS(th) VDS = VGS, ID = 250 A 2 - 4 V VGS = 20 V - - 100 nA VGS = 30 V - - 1 A VDS = 600 V, VGS = 0 V - - 1 VDS = 480 V, VGS = 0 V, TJ = 125 C - - 10 Gate-Source Leakage IGSS Zero Gate Voltage Drain Current IDSS A - 0.32 0.38 gfs VDS = 40 V, ID = 8 A - 3.8 - S Input Capacitance Ciss 937 - Coss - 53 - Reverse Transfer Capacitance Crss VGS = 0 V, VDS = 100 V, f = 1 MHz - Output Capacitance - 5 - Effective Output Capacitance, Energy Related a Co(er) - 41 - Effective Output Capacitance, Time Related b Co(tr) - 136 - - 29 58 - 6 - Drain-Source On-State Resistance Forward Transconductance RDS(on) VGS = 10 V ID = 6 A Dynamic pF VDS = 0 V to 480 V, VGS = 0 V Total Gate Charge Qg Gate-Source Charge Qgs VGS = 10 V ID = 6 A, VDS = 480 V Gate-Drain Charge Qgd - 13 - Turn-On Delay Time td(on) - 14 28 Rise Time Turn-Off Delay Time tr td(off) Fall Time tf Gate Input Resistance Rg nC VDD = 480 V, ID = 6 A, VGS = 10 V, Rg = 9.1 - 19 38 - 35 70 - 19 38 f = 1 MHz, open drain - 1.1 - - - 12 - - 48 - - 1.2 V - 350 - ns - 4 - C - 19 - A ns Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current IS Pulsed Diode Forward Current ISM Diode Forward Voltage VSD Reverse Recovery Time trr Reverse Recovery Charge Qrr Reverse Recovery Current IRRM MOSFET symbol showing the integral reverse p - n junction diode D A G TJ = 25 C, IS = 6 A, VGS = 0 V TJ = 25 C, IF = IS = 6 A, dI/dt = 100 A/s, VR = 25 V S Notes a. Coss(er) is a fixed capacitance that gives the same energy as Coss while VDS is rising from 0 % to 80 % VDSS. b. Coss(tr) is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 % to 80 % VDSS. S15-0277-Rev. D, 23-Feb-15 Document Number: 91479 2 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiHP12N60E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) 3 TOP 15 V 14 V 13 V 25 12 V 11 V 10 V 20 9V RDS(on), Drain-to-Source On Resistance (Normalized) 8V TJ = 25 C 15 7V 10 6V 5 5V 0 0 5 10 15 20 25 1 VGS = 10 V 0.5 20 40 60 80 100 120 140 160 TJ, Junction Temperature (C) Fig. 1 - Typical Output Characteristics Fig. 4 - Normalized On-Resistance vs. Temperature 10 000 TJ = 150 C 7V Capacitance (pF) ID, Drain-to-Source Current (A) 1.5 VDS, Drain-to-Source Voltage (V) TOP 15 V 14 V 13 V 12 V 11 V 10 V 9V 8V 12 2 0 - 60 - 40 - 20 0 30 20 16 ID = 6 A 2.5 6V 8 Ciss 1000 VGS = 0 V, f = 1 MHz Ciss = Cgs + Cgd, Cds Shorted Crss = Cgd Coss = Cds + Cgd Coss 100 10 5V 4 Crss 1 0 0 5 10 15 20 25 30 0 VDS, Drain-to-Source Voltage (V) 100 200 300 400 500 600 VDS, Drain-to-Source Voltage (V) Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 2 - Typical Output Characteristics 8 7 25 TJ = 150 C 6 2000 20 5 Coss (pF) ID, Drain-to-Source Current (A) 30 15 4 Coss Eoss 3 200 10 Eoss (J) ID, Drain-to-Source Current (A) 30 TJ = 25 C 2 5 1 0 20 0 5 10 15 20 25 VGS, Gate-to-Source Voltage (V) Fig. 3 - Typical Transfer Characteristics S15-0277-Rev. D, 23-Feb-15 0 0 100 200 300 VDS 400 500 600 Fig. 6 - Coss and Eoss vs. VDS Document Number: 91479 3 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiHP12N60E www.vishay.com Vishay Siliconix 15 VDS = 480 V VDS = 300 V VDS = 120 V 20 12 ID, Drain Current (A) VGS, Gate-to-Source Voltage (V) 24 16 12 8 9 6 3 4 0 0 0 10 20 30 40 50 25 60 Qg, Total Gate Charge (nC) 50 75 100 125 150 TJ, Case Temperature (C) Fig. 7 - Typical Gate Charge vs. Gate-to-Source Voltage Fig. 10 - Maximum Drain Current vs. Case Temperature 750 725 VDS, Drain-to-Source Breakdown Voltage (V) ISD, Reverse Drain Current (A) 100 TJ = 150 C 10 TJ = 25 C 1 700 675 650 625 600 575 550 VGS = 0 V 525 - 60 - 40 - 20 0 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 20 40 60 80 100 120 140 160 TJ, Junction Temperature (C) VSD, Source-Drain Voltage (V) Fig. 8 - Typical Source-Drain Diode Forward Voltage Fig. 11 - Temperature vs. Drain-to-Source Voltage ID, Drain Current (A) 1000 Operation in this Area Limited by RDS(on) 100 IDM = Limited 10 100 s Limited by RDS(on)* 1 1 ms 10 ms TC = 25 C TJ = 150 C Single Pulse 0.1 BVDSS Limited 0.01 1 10 100 1000 VDS, Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Fig. 9 - Maximum Safe Operating Area S15-0277-Rev. D, 23-Feb-15 Document Number: 91479 4 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiHP12N60E www.vishay.com Vishay Siliconix Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 0.1 0.05 0.1 0.02 Single Pulse 0.01 0.0001 0.001 0.01 0.1 1 Pulse Time (s) Fig. 12 - Normalized Thermal Transient Impedance, Junction-to-Case VGS VDS RD VDS tp VDD D.U.T. RG + - VDD VDS 10 V Pulse width 1 s Duty factor 0.1 % IAS Fig. 13 - Switching Time Test Circuit Fig. 16 - Unclamped Inductive Waveforms VDS QG 10 V 90 % QGS QGD VG 10 % VGS td(on) td(off) tf tr Charge Fig. 17 - Basic Gate Charge Waveform Fig. 14 - Switching Time Waveforms Current regulator Same type as D.U.T. L Vary tp to obtain required IAS VDS 50 k D.U.T RG 12 V + - IAS 0.2 F 0.3 F V DD + D.U.T. - VDS 10 V tp 0.01 VGS 3 mA Fig. 15 - Unclamped Inductive Test Circuit IG ID Current sampling resistors Fig. 18 - Gate Charge Test Circuit S15-0277-Rev. D, 23-Feb-15 Document Number: 91479 5 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiHP12N60E www.vishay.com Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + D.U.T. Circuit layout considerations * Low stray inductance * Ground plane * Low leakage inductance current transformer + - - Rg * * * * + dV/dt controlled by Rg Driver same type as D.U.T. ISD controlled by duty factor "D" D.U.T. - device under test + - VDD Driver gate drive P.W. Period D= P.W. Period VGS = 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage Inductor current VDD Body diode forward drop Ripple 5 % ISD Note a. VGS = 5 V for logic level devices Fig. 19 - For N-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?91479. S15-0277-Rev. D, 23-Feb-15 Document Number: 91479 6 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix TO-220-1 A E DIM. Q H(1) D 3 2 L(1) 1 M* L b(1) INCHES MIN. MAX. MIN. MAX. A 4.24 4.65 0.167 0.183 b 0.69 1.02 0.027 0.040 b(1) 1.14 1.78 0.045 0.070 F OP MILLIMETERS c 0.36 0.61 0.014 0.024 D 14.33 15.85 0.564 0.624 E 9.96 10.52 0.392 0.414 e 2.41 2.67 0.095 0.105 e(1) 4.88 5.28 0.192 0.208 F 1.14 1.40 0.045 0.055 H(1) 6.10 6.71 0.240 0.264 0.115 J(1) 2.41 2.92 0.095 L 13.36 14.40 0.526 0.567 L(1) 3.33 4.04 0.131 0.159 OP 3.53 3.94 0.139 0.155 Q 2.54 3.00 0.100 0.118 ECN: X15-0364-Rev. C, 14-Dec-15 DWG: 6031 Note * M* = 0.052 inches to 0.064 inches (dimension including protrusion), heatsink hole for HVM C b e J(1) e(1) Package Picture ASE Revison: 14-Dec-15 Xi'an Document Number: 66542 1 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000