AS-Interface IC AS-Interface Development Tools Brief Description Benefits The ZMDI AS-Interface Programmer provides support for new comers and experienced users in handling ZMDI's AS-Interface ICs. A self-explanatory graphical user interface allows to control AS-Interface functionality like EEPROM programming, telegram by telegram debugging - including IC configuration - of an AS-Interface network, and setting and reading of digital parameter and IO ports. Furthermore a real AS-Interface network can be controlled digitally with a graphical interface. Features * Programming of ZMDI's AS-Interface IC EEPROM (A2SI-Lite, ASI4U, SAP5) * Integrated AS-I Power generation * Static AS-Interface configuration network evaluation * Enables a start of a development with a camparative low buget * Graphical user interface enables an easy visual analysis and configuration Available Support * ZMDI AS-Interface Programmer Kit USB - PC-connectable via USB, incl. hard- and software - ordering code: 36 00 100 147 * ZMDI ASI4U Evaluation Board V2.0 - Ordering code: 36 00 100 143 * ZMDI SAP5 Evaluation Board V2.0 - Ordering code: 36 00 100 144 and * Control the AS-I Programmer by the open serial protocol * An ideal kit for setup and test of AS-Interface modules Ordering information ZMDI AS-Interface Programmer V2.0 USB Kit (PCB + Software) Ordering Code: 36 00 100 147 Sales and Further Information www.zmdi.com asi@zmdi.com Zentrum Mikroelektronik Dresden AG ZMD America, Inc. Zentrum Mikroelektronik Dresden AG, Japan Office ZMD FAR EAST, Ltd. Grenzstrasse 28 01109 Dresden Germany 8413 Excelsior Drive Suite 200 Madison, WI 53717 USA Phone Fax Phone Fax Phone Fax Phone Fax +49 (0)351.8822.7274 +49 (0)351.8822.8.7274 +1 (608) 829-1987 +1 (631) 549-2882 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan +81.3.6895.7410 +81.3.6895.7301 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan +886 2 2377 8189 +886 2 2377 8199 DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise. (c) 2010 Zentrum Mikroelektronik Dresden AG-- Rev. 2.01 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.