FieldIT Data Sheet SS/268XR_2 2600T Series Pressure Transmitters Model 268DR Differential Models 268PR and 268HR Gauge Models 268VR and 268NR Absolute with remote seal(s) TUV SIL2 certified to IEC 61508/ISA S84.01 - the smart solution in Safety loop application Base accuracy : 0.075% Span limits - 0.2 to 16000kPa; 0.8inH2O to 2320psi - 0.54 to 16000kPa abs; 4mmHg to 2320psia Reliable sensing system coupled with very latest digital technologies Hardware and software redundancy with MTBF of over 100 years Comprehensive sensor choice - optimize in-use total performance and stability 5-year stability Flexible configuration facilities - via hand held terminal or PC configuration platform HART(R) communication - provides integration with HART(R) platforms Broad selection of variants, options fill fluids and wetted materials - allows total flexibility maximizing cost-effective aspect, also providing applications with critical process media at extended temperature range PED compliance to sound engineering practice (SEP) ABB 2600T Series Engineered solutions for all applications 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 General Description Model Models detailed in this data sheet apply for those transmitters which include one or two remote seal(s) connected via a capillary to the transmitter sensor. Depending on the selected ordering code the following models are available: a) model 268DR which allows a differential measurement using either two remote seals of same type and size or one remote seal (on positive or negative side) and a standard threaded connection 1/4in NPT on flange or 1/2in NPT through adapter, for the wet or dry leg on the side opposite to seal. b) models 268PR or 268VR allowing gauge or absolute measurement respetively with the reference side at atmosphere or at vacuum. The other side which can be the positive or negative (high or low pressure side) features the required remote seal. Seal type Size Mnemonic S264W Wafer 1 1/2in / DN40 2in / DN50 3in / DN80 S264C Chemical tee flanged 3in P3 Flanged flush diaphragm 2in / DN50 3-4in / DN80-100 P2 P3 Flanged extended diaphragm 2in / DN50 3in / DN80 4in / DN100 E2 E3 P3 S264U Union 1 1/2in P1.5 S264T Threaded off-line 2 1/2in T2.5 S264M Flanged off-line 2 1/2in T2.5 The following table list the types of standard seal which can be combined with 268xR transmitters (the mnemonic is used as reference in the compatibility table of page 3). S264S Union nut Triclamp Cherry Burrel Sanitary, Aseptic 2in / F50 3in / F80 4in S2 S3 S3 Refer to seal data sheet for all data and details relevant to seal element. S264B Button 1in B1 S264P Urea service flanged 1 1/2in 2 1/2in Model 268HR or 268NR have the remote seal on the positive side and the user can select the suitable code for having the reference at armospheric or vacuum pressure respectively for gauge or absolute measure. S264F P1.5 P2 P3 U1.5 U2.5 All following specification data apply for identical characteristics of the two sides when the transmitter is differential with two seals. Functional Specifications Range and span limits - models 268DR/268PR/268VR Sensor Code B E F G H M P Q S 2 Upper Range Limit (URL) 268DR differential measure Lower Range Limit (LRL) 268PR gauge measure 268VR absolute measure Minimum span 4kPa 40mbar 16inH2O 16kPa 160mbar 64inH2O 40kPa 400mbar 160inH2O 65kPa 650mbar 260inH2O 160kPa 1600mbar 642inH2O 600kPa 6bar 87psi 2400kPa 24bar 348psi 8000kPa 80bar 1160psi -4kPa -40mbar -16inH2O -16kPa -160mbar -64inH2O -40kPa -400mbar -160inH2O -65kPa -650mbar -260inH2O -160kPa -1600mbar -642inH2O -600kPa -6bar -87psi -2400kPa -24bar -348psi -8000kPa -80bar -1160psi -16kPa -160mbar -64inH2O -40kPa -400mbar -160inH2O -65kPa -650mbar -260inH2O 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 0.2kPa 2mbar 0.8inH2O 0.54kPa 5.4mbar 2.16inH2O 0.67kPa 6.7mbar 2.67inH2O 1.1kPa 11mbar 4.35inH2O 2.67kPa 26.7mbar 10.7inH2O 10kPa 0.1bar 1.45psi 40kPa 0.4bar 5.8psi 134kPa 1.34bar 19.4psi 16000kPa 160bar 2320psi -16000kPa -160bar -2320psi 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 267kPa 2.67bar 38.7psi 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 Span limits - models 268HR/NR Sensor Code Upper Range Limit (URL) Lower Range Limit (LRL) Minimum Span G 65kPa 650mbar 260inH2O 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 1.1kPa 11mbar 4.35inH2O H 160kPa 1600mbar 642inH2O 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 2.67kPa 26.7mbar 10.7inH2O M 600kPa 6bar 87psi 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 10kPa 0.1bar 1.45psi P 2400kPa 24bar 348psi 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 40kPa 0.4bar 5.8psi Q 8000kPa 80bar 1160psi 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 134kPa 1.34bar 19.4psi S 16000kPa 160bar 2320psi 0.07kPa abs () 0.7mbar abs () 0.5mmHg () 267kPa 2.67bar 38.7psi Maximum span = URL (can be further adjusted up to URL (TD = 0.5) for differential models, within the range limits) IT IS RECOMMENDED TO SELECT THE TRANSMITTER SENSOR CODE PROVIDING THE TURNDOWN VALUE AS LOWEST AS POSSIBLE TO OPTIMIZE PERFORMANCE CHARACTERISTICS. Zero suppression and elevation Zero and span can be adjusted to any value within the range limits detailed in the table as long as: - calibrated span minimum span Damping Selectable time constant : 0, 0.25, 0.5, 1, 2, 4, 8 or 16s. This is in addition to sensor response time Turn on time Operation within specification in less than 5s with minimum damping. Insulation resistance > 100M at 1000VDC (terminals to earth) () Double the value with the inert filling Sensor Code B E F-G H M P Q S Compatibility (allowed seal types with maximum capillary length (m) in brakets) versus measurement configuration Differential gauge and differential absolute (two seals) (one seal) (one seal) P3 (1.5) E3 (1*) T2.5 (1*) S3 (1.5*) P3 (3) E3 (2*), T2.5 (2*), S3 (3*) P2 (3), P3 (6), E2 (2), E3 (4), T2,5 (3) U2.5 (3), S2 (1*), S3 (6) P1.5 (4), P2 (8), P3 (8), E2 (6), E3 (6) T2.5 (6),U2.5 (6), S2 (3), S3 (10) P1.5 (5), P2 (8), P3 (10), E2 (6), E3 (8), T2.5 (6), U2.5 (6), S2 (6), S3 (10) P1.5 (5), P2 (8), P3 (10), E2 (6), E3 (8), T2.5 (6), U2.5 (6), S2 (6), S3 (10) P1.5 (5), P2 (8), P3 (10), E2 (6), E3 (8), T2.5 (6), U2.5 (6), S2 (6), S3 (10) P1.5 (5), P2 (8), P3 (10), T2.5 (6), U2.5 (6) P3 (1) S3 (1) P2 (2), P3 (4), E3 (3), T2,5 (2) U2.5 (3), S3 (4) P1.5 (3), P2 (6), P3 (10), E2 (4), E3 (8) T2.5 (6),U2.5 (6), S2 (2), S3 (10) P1.5 (5), P2 (8), P3 (10), E2 (6), E3 (8), T2.5 (6), U1.5 (5),U2.5 (6), S2 (6), S3 (10) P1.5 (5), P2 (8), P3 (10), E2 (6), E3 (8), T2.5 (6), U1.5 (5), U2.5 (6), S2 (6), S3 (10) P1.5 (5), P2 (8), P3 (10), E2 (6), E3 (8), B1 (3*) T2.5 (6), U1.5 (5), U2.5 (6), S2 (6), S3 (10) P1.5 (5), P2 (8), P3 (10), T2.5 (6), U1.5 (5), U2.5 (6), B1 (3*) P2 (2), P3 (3), E3 (3), T2,5 (2) U2.5 (3), S3 (3) P1.5 (3), P2 (5), P3 (8), E2 (3), E3 (6) T2.5 (5),U2.5 (5), S2 (2), S3 (8) P1.5 (4), P2 (6), P3 (8), E2 (5), E3 (6), T2.5 (5), U1.5 (4),U2.5 (5), S2 (5), S3 (8) P1.5 (4), P2 (6), P3 (8), E2 (5), E3 (6), T2.5 (5), U1.5 (4),U2.5 (5), S2 (5), S3 (8) P1.5 (4), P2 (6), P3 (8), E2 (5), E3 (6), T2.5 (5), U1.5 (4),U2.5 (5), S2 (5), S3 (8) P1.5 (4), P2 (6), P3 (8), T2.5 (5), U1.5 (4),U2.5 (5) The combinations sensor code/seal type marked (*) modify the base accuracy rating and static pressure effect; refer to performance specifications. Although he above table defines capillary length, for some types of seal combined to the sensor, care should be taken of the maximum working pressure of the used seal which can limit the range. Refer to ABB for data related to application of capillary lengths greater than those specified in above table. 3 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 Operative limits Pressure limits Temperature limits C (F) : Refer to seal specification sheet for maximum working pressure related to the used remote seal. Ambient (is the operating temperature) Overpressure limits (without damage to the transmitter) Filling Silicone oil DC 200TM Inert GaldenTM Inert HalocarbonTM Models 268DR/PR/VR Models 268HR/NR Sensors Sensors Sensors B, E F to S G to S -40 and +85 -25 and +85 -40 and +85 (-40 and +185) (-13 and +185) (-40 and +185) -20 and +85 -10 and +85 -20 and +85 (-4 and +185) (+14 and +185) (-4 and +185) -20 and +85 -10 and +85 -20 and +85 (-4 and +185) (+14 and +185) (-4 and +185) Lower ambient limit for LCD indicators: -20C (-4F) Note : For Hazardous Atmosphere applications see the temperature range specified on the certificate/approval relevant to the aimed type of protection Process Lower limit (low pressure side 268DR only) - refer to lower ambient limits; -20C (-4F) for Viton gasket Upper limit (low pressure side 268DR only) - Silicone oil: 121C (250F) (1) - Inert fluid: 100C (212F) (2) (1) 100C (212F) for application below atmospheric pressure (2) 65C (150F) for application below atmospheric pressure The following table show characteristics of capillary/seal fill fluids when used in transmitters with remote seal. OPERATING CONDITIONS Tmax Pmin Tmax @ Pabs>of mbar abs @ P min (psia) Silicone oil-DC200TM 200 (390) 0.7 160 (General purpose) @ 35mbar (0.01) (320) Silicone oil-AN140TM 380 (716) 0.7 300 (High temperature) @ 1bar (0.01) (572) Silicone Polymer-SylthermXLTTM 100 (212) 2 20 (Low temperature) @ 110mbar (0.03) (68) Vegetable oil-Neobee M-20TM 200 (390) 130 150 (Food-Sanitary) FDA @ 1bar (1.9) (300) Glycerin Water (70%) 93 (200) 1000 93 (Food-Sanitary) FDA @ 1bar (14.5) (200) Mineral oil-MARCOL 82TM 200 (390) 33 40 (Food-Sanitary) FDA @ 200mbar (0.5) (104) Inert - GaldenTM 160 (320) 0.7 65 (Oxygen Service) @ 1bar (0.01) (150) Inert - HalocarbonTM4.2 180 (356) 4 70 (Oxygen Service) @ 400mbar (0.06) (158) ABB fill 300 (572) 0.7 160 (Paints and specials) @ 400mbar (0.01) (320) Tmin -40 (-40) -5 (+23) -100 (-148) -18 (0) -7 (+20) -40 (-40) -18 (0) -20 (-4) -10 (+14) Fills fluids with FDA are defined as food fills and are Generally Recognized As Safe (GRAS) by the US Food and Drug Administration (FDA). Lower limit for Viton gasket -20C (-4F) Storage Lower limit: -50C (-58F); -40C (-40F) for LCD indicators Upper limit: +85C (+185F) 4 - 16MPa, 160bar, 2320psi for models 268DR, 268PR and 268VR (except 7MPa, 70bar, 1015psi for sensor code B) - 21MPa, 210bar, 3045psi for models 264HR and 264NR Static pressure Transmitters for differential pressure model 268DR operates within specifications between the following limits: - 1.3kPa abs,13mbar abs, 0.2psia and 16MPa, 160bar, 2320psi (except 7MPa, 70bar, 1015psi for sensor code B). Upper ambient limit for LCD indicators: +70C (+158F) FILL FLUIDS (APPLICATION) 0.067kPa abs, 0.67mbar abs, 0.01psia (double with inert filling) to transmitter sensor limit or flange rating of seal, whichever is less: - 0.067kPa abs,0.67mbar abs, 0.1psia and 16MPa, 160bar, 2320psi (except 7MPa, 70bar, 1015psi for sensor code B) or flange rating of seal whichever is less, using two remote seals on both transmitter side. 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR Proof pressure SS/268XR_2 Wet and dust-laden atmospheres The transmitter can be exposed without leaking to line pressure of up to - 28MPa, 280bar, 4000psi for model 268DR The transmitter is dust and sand tight and protected against immersion effects as defined by EN 60529 (1989) to IP 67 (IP 68 on request) or by NEMA to 4X or by JIS to C0920. - 40MPa, 400bar, 5900 psi for models 268HR/NR or two times the flange rating of seal, whichever is less Meet ANSI/ISA-S 82.03 hydrostatic test requirements and SAMA PMC 27.1. Environmental limits Electromagnetic compatibility (EMC) Comply with EN 61000-6-3 for emission and EN 61000-6-2 for immunity requirements and test; Radiated electromagnetic immunity level: (according to IEC 1000-4-3, EN61000-4-3) 30V/m Conducted electromagnetic immunity level : (according to IEC 1000-4-6, EN 61000-4-6) 30V Surge immunity level (with surge protector): (according to IEC 1000-4-5 EN 61000-4-5) 4kV Fast transient (Burst) immunity level: (according to IEC 1000-4-4 EN 61000-4-4) 4kV Hazardous atmospheres With or without output meter - INTRINSIC SAFETY/EUROPE: ATEX/TUV approval II 1 G T50C, EEx ia IIC T5 (-40C Ta +40C) T95C, EEx ia IIC T4 (-40C Ta +85C) - FLAMEPROOF/EUROPE: ATEX/CESI approval II 1/2 GD T85C, EEx d IIC T6 (-40C Ta +75C) - FACTORY MUTUAL: - Explosionproof: Class I, Div. 1, Groups A, B, C, D - Dust ignitionproof : Class II, Div. 1, Groups E, F, G - Suitable for : Class II, Div. 2, Groups F, G; Class III, Div. 1, 2 Pressure equipment directive (PED) Comply with 97/23/EEC following sound engineering practice (SEP). Humidity Relative humidity: up to 100% annual average Condensing, icing: admissible Vibration resistance Accelerations up to 2g at frequency up to 1000Hz (according to IEC 60068-2-26) Shock resistance (according to IEC 60068-2-27) Acceleration: 50g Duration: 11ms 5 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 Optional surge protection Electrical Characteristics and Options HART digital communication and 4 to 20mA output Up to 4kV Power Supply - current 8 s rise time / 20 s delay time to half value The transmitter operates from 10.5 to 42VDC with no load and is protected against reverse polarity connection (additional load allows operations over 42VDC). For EEx ia and other intrinsically safe approval power supply must not exceed 30VDC. Output signal Two-wire 4 to 20mA, user-selectable for linear or square root output, power of 3/2 or 5/2, 5th order or two 2nd order switching point selectable programmable polynomial output. HART(R) communication provides digital process variable (%, mA or engineering units) superimposed on 4 to 20mA signal, with protocol based on Bell 202 FSK standard. Ripple 20mV max on a 250 load as per HART specifications MINIMUM OPERATING VOLTAGES Output current limits (to NAMUR standard) Overload condition no link on output indicator plugs with CoMeter indicator and HART communication with ProMeter output indicator - Lower limit: 3.8mA - Upper limit: 20.5mA Transmitter failure mode (to NAMUR standard) with optional surge protection The output signal can be user-selected to a value of 3.7 or 22mA on gross transmitter failure condition, detected by self-diagnostics. with optional output analog indicator In case of CPU failure the output is driven <3.7mA or >22mA. (volts) 10.7 12.3 12.5 13.3 15.3 Load limitations 4 to 20mA and HART total loop resistance : Supply voltage - min. operating voltage (VDC) --------------------------------------- 22.5 A minimum of 250 is required for HART communication. R(k) = Optional indicators Output meter CoMeter and Prometer LCD : 5-digit (99999 counts) programmable with 7.6mm. high (3in), 7-segment numeric characters plus sign and digital point for digital indication of output value in percentage, current or engineer unit; 10-segment bargraph display (10% per segment) for analog indication of output in percentage; 7-digit with 6mm. high (2.3in), 14-segment alphanumeric characters, for engineer units and configuration display Analog : 36mm (1.4in) scale on 90. 6 - voltage 1.2 s rise time / 50 s delay time to half value 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR Performance specifications Stated at reference condition to IEC 60770 ambient temperature of 20C (68F), relative humidity of 65%, atmospheric pressure of 1013hPa (1013mbar), mounting position with vertical diaphragm and zero based range for transmitter with isolating diaphragms in AISI 316 L ss or Hastelloy and silicone oil fill and HART digital trim values equal to 4-20mA span end points, in linear mode. Unless otherwise specified, errors are quoted as % of span. SS/268XR_2 Operating influences Temperature effects per 20K (36F) ambient temperature change on transmitter sensor between the limits of -20C to +65C (-4 to +150F): Sensor Code Model for TD up to E to S 10:1 (0.04% URL +0.065% span) B 5:1 (0.06% URL +0.10% span) Some performance data are affected by the actual turndown (TD) as ratio between Upper Range Limit (URL) and calibrated span. 268DR 268PR IT IS RECOMMENDED TO SELECT THE TRANSMITTER SENSOR CODE PROVIDING THE TURNDOWN VALUE AS LOWEST AS POSSIBLE TO OPTIMIZE PERFORMANCE CHARACTERISTICS. 268VR E to S 10:1 (0.08% URL +0.13% span) 268HR/NR G to S 10:1 (0.04% URL +0.065% span) Accuracy rating % of calibrated span, including combined effects of terminal based linearity, hysteresis and repeatability. For fieldbus versions SPAN refer to analog input function block outscale range Using remote seal sizes <DN 80/3in - 0.10% for TD from 1:1 to 10:1 (0.10% for sensor codes B and E for TD from 1:1 to 5:1) - 0.01% x 0.02% x URL Span URL Span Optional CoMeter and ProMeter ambient temperature Total reading error per 20K (36F) change between the ambient limits of -20 and +70C (-4 and +158F) : 0.15% of max span (16mA). Static pressure (zero errors can be calibrated out at line pressure) for sensor codes B and E for TD from 5:1 to 10:1) URL - 0.0075% x Span for TD from 10:1 to 20:1 URL Span Refer to seal data sheet for additional effects of the remote seal. for TD from 10:1 to 20:1 Using remote seal sizes DN 80/3in - 0.075% for TD from 1:1 to 10:1 ( 0.10% for sensor codes B and E for TD from 1:1 to 5:1) (0.02% x The total temperature error is the combination of the above transmitter effect with seal errors, as appliclable due to application temperatures. for sensor codes B and E for TD from 5:1 to 10:1) Multiply the values by 1.5 for sensor/seal combination marked (*) and for transmitter for absolute measurement. for differential measurement per 2MPa, 20bar or 290psi. Model 268DR with remote seal(s) - zero error: 0.25% of URL - span error: 0.25% of reading Multiply by 1.5 the errors for sensor codes B and E and for sensor/ seal combinations marked (*) Supply voltage Within voltage/load specified limits the total effect is less than 0.005% of URL per volt. Load Within load/voltage specified limits the total effect is negligible. Radio frequency interference Total effect : less than 0.10% of span from 20 to 1000MHz and for field strengths up to 30V/m when tested with shielded conduit and grounding, with or without meter. Common mode interference No effect from 100Vrms @ 50Hz, or 50VDC Vibration effect 0.10% of URL (according to IEC 61298-3) 7 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR Physical Specification SS/268XR_2 Calibration (Refer to ordering information sheets for variant availability related to specific model or versions code) Standard: at maximum span, zero based range, ambient temperature and pressure; Materials Optional: at specified range and ambient conditions;. Model 268DR only - Side without seal Optional extras Process isolating diaphragms (*) Output indicator AISI 316 L ss; Hastelloy C276TM; Monel 400TM; Tantalum; Hastelloy C276TM on AISI 316 L ss gasket seat. A remote seal can be selected with required diaphragm (refer below) Process flanges, adapters, plugs and drain/vent valves (*) AISI 316 L ss; Hastelloy C276TM; Monel 400TM. Bolts and nuts AISI 316 ss bolts and nuts Class A4-50 per UNI 7323 (ISO 3506), in compliance with NACE MR0175 Class II. Gaskets (*) VitonTM; PTFE. Models 268DR/PR/VR/HR/NR Blind flange (reference and/or remote seal(s) side) AISI 316 L ss Seal side process diaphragm (remote seal) (*) AISI 316 L ss; Hastelloy C276TM, Tantalum; AISI 316 L ss or Hastelloy C276TM with anti-stick coating; AISI 316 L ss with anti-corrosion coating, AISI 316 L ss Urea Grade. Extension material AISI 316 L ss; Hastelloy C276TM; AISI 316 L ss or Hastelloy C276TM with coating same as diaphragm. Seal side fill fluid (remote seal) Silicone oil-DC200TM, Silicone oil-AN140TM, Inert-GaldenTM, Inert-HalocarbonTM 4.2, Silicone Polymer-Syltherm XTLTM, Vegetable oil-Neobee M-20TM, Glycerin Water, Mineral oil-MARCOL 82TM, ABB fill. Sensor fill fluid Silicone oil (DC200); inert fill (HalocarbonTM 4.2 or GaldenTM). plug-in rotatable type, LCD or analog. Supplemental customer tag AISI 316 ss tag screwed/fastened to the transmitter for customer's tag data up to a maximum of 20 characters and spaces on one line for tag number and tag name, and up to a maximum of 3 spaced strings of 10 characters each for calibration details (lower and upper values plus unit). Special typing evaluated on request for charges. Surge protection Cleaning procedure for oxygen service Hydrogen or special service preparation Test Certificates (test, design, calibration, material traceability) Tag and manual language Communication connectors Process connections on conventional flanges : 1/4in NPT on process axis on adapters : 1/2in NPT on process axis fixing threads: 7/16in-20 UNF at 41.3mm centre distance Refer to seal data sheet for process connection variants through remote seal. Electrical connections Two 1/2 NPT or M20x1.5 or PG 13.5 or 1/2 GK threaded conduit entries, direct on housing. Special communication connector (on request) - HART : straight or angle Harting Han connector and one plug. Terminal block HART version: three terminals for signal/external meter wiring up to 2.5mm2 (14AWG) and three connection points for test and communication purposes. Sensor housing AISI 316 L ss. Electronic housing and covers Barrel version - Copper-free content aluminium alloy with baked epoxy finish; - Low-copper content aluminium alloy with baked epoxy finish; - AISI 316 L ss. DIN version - Low-copper content aluminium alloy with baked epoxy finish. Covers O-ring Buna N. Grounding Internal and external 6mm2 (10AWG) ground termination points are provided. Mounting position Transmitter can be mounted in any position. Electronics housing may be rotated to any position. A positive stop prevents over travel. Mass (without options and seals) - models 268DR/PR/VR : 3kg approx (7lb) - models 268HR/NR: 1.7kg approx (4lb) Add 1.5kg (3.4lb) for AISI housing. Add 650g (1.5lb) for packing. Local zero and span adjustments: Glass filled polycarbonate plastic (removable). Packing Carton Tagging AISI 316ss data plate attached to the electronics housing. 8 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 Configuration TM Hastelloy is a Cabot Corporation trademark Transmitter with HART communication and 4 to 20 mA TM Monel is an International Nickel Co. trademark Standard configuration Transmitters are factory calibrated to customer's specified range. Calibrated range and tag number are stamped on the tag plate. If a calibration range and tag data are not specified, the transmitter will be supplied with the plate left blank and configured as follows: Engineering Unit Specify from table 4 mA Zero 20 mA Upper Range Limit (URL) Output Linear Damping 1 sec. Transmitter failure mode Upscale Software tag characters Blank Optional LCD indicator/display 0 to 100.0% linear Any or all the above configurable parameters, including Lower range-value and Upper range-value which must be the same unit of measure, can be easily changed using the HART hand-held communicator or by a PC running the configuration software SMART VISION with DTM for 2600T. The transmitter database is customized with specified flange type and material, O-ring and drain/vent materials and meter code option. Custom configuration (option) The following data may be specified in addition to the standard configuration parameters: Descriptor 16 alphanumeric characters Message 32 alphanumeric characters Date Day, month, year TM Viton is a Dupont de Nemour trademark TM DC200 is a Dow Corning Corporation trademark TM Galden is a Montefluos trademark TM Halocarbon is a Halocarbon Products Co. trademark TM AN140 is a Wacker-Chemie trademarl TM Neobee M20 is a Stepan Company trademark TM Marcol is a Esso Italiana trademarl TM Syltherm is a Dow Chemical Company trademark (*) Wetted parts of the transmitter. (**) U-bolt material: AISI 400 ss; screws material: high-strength alloy steel or AISI 316 ss. For any protocol available engineering units of pressure measure are : Pa, kPa, MPa inH2O@4C, mmH2O@4C, psi inH2O@20C, ftH2O@20C, mmH2O@20C inHg, mmHg, Torr g/cm2, kg/cm2, atm mbar, bar 9 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 MOUNTING DIMENSIONS (not for construction unless certified) - dimensions in mm (in) 268DR/PR/VR transmitter on bracket for vertical or horizontal 60mm (2in) pipe mounting (barrel housing) Adjustments ! 63 (2.48) 166 (6.54) Output meter housing Electronic side G A RD ER KE L Terminal side 135 (5.31) S ON T S O I TS AL I V U S T E E CU T S I Cover locking screw N IO Certification label NS Min. clearance to remove the cover 86 (3.39) L ES C C I R IR C U 36 (1.42) 17 (0.67) E T QU AN E' T H E N W 127 (5.00) Electrical connections Barrel type housing E RC L E B I E UV ER T N FER V I GH M CO E P CO T E 17 (0.67) Identification tag 41.3 (1.63) 82 (3.23) + Flange 54 (2.13) To remote seal 62 (2.44) 38 (1.50) 43 (1.69) 51 (2.01) 55 (2.17) Consider one capillary only to remote seal for 268PR/VR 127 (5.00) 36 (1.42) 17 (0.67) 135 (5.31) 17 (0.67) 82 (3.23) + 54 (2.13) 43 (1.69 71 (2.80) Note : For 268DR side with 1/4in - 18NPT thread director with 1/2in - 14NPT through adapter, threaded process connection, gasket groove and gaskets are in accordance with DIN 19213. Bolting threads for fixing adapter or other devices (i.e. manifod etc.) on process flange is 7/16in-20 UNF. 10 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 268DR/PR/VR transmitter on bracket for vertical or horizontal 60mm (2in) pipe mounting (DIN housing) Terminal side 86 (3.39) 7 (0.28) G A RD ER KE L F lange E RC L E B I E UV ER T N FER V I GH M CO E P CO T E Certification label 17 (0.67) Certification label Electronic side 148 (5.83) 36 (1.42) 55 (2.17) 51 (2.01) ! 142 (5.59) N IO L ES C C I R IR C U NS E T QU AN E' T H E N W 63 (2.48) 41.3 (1.63) Adjustments Identification tag To remote seal External ground Output meter housing S ON T S O I TS AL I V U S T E E CU T S I Cover locking screw 179 (7.05) DIN type housing 17 (0.67) 55 (2.17) max 38 (1.50) Electrical connections 82 (3.23) Consider one capillary only to remote seal for 268PR/VR 268DR/PR/VR transmitter on bracket for vertical or horizontal 60mm (2in) pipe mounting G A RD ER KE L 102 (4.02) S ON T S O I TS AL I V U S T E E CU T S I ! E T QU AN E' T H E N W N IO E RC L E B I E UV ER T N FER V I GH M CO E P CO T E NS 82 (3.23) 11 L ES C C I R IR C U 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 268DR/PR/VR transmitter on bracket for wall mounting (by four M8 screws) G A RD ER KE L 25 (1) L ES C C I R IR C U 70 (2.75) 70 (2.75) S ON T S O I TS AL I V U S T E E CU T S I ! E T QU AN E' T H E N W N IO E RC L E B I E UV ER T N FER V I GH M CO E P CO T E NS 70 (2.75) 268DR/PR/VR transmitter on flat type (for box) bracket for vertical or horizontal 60mm (2in) pipe mounting N IO L ES C C I R IR C U NS S ON T S O I TS AL I V U S T E E CU T S I G A RD ER KE L E T QU AN E' T H E N W ! E RC L E B I E UV ER T N FER V I GH M CO E P CO T E 25 (0.98) 70 (2.75) 47 (1.85) 98 (3.86) Consider one capillary only to remote seal for 268PR/VR 12 84 (3.31) 70 (2.75) 204 (8.03) + 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 268HR/NR transmitter on bracket for 60mm (2in) pipe mounting (barrel housing) Electrical connections 17 (0.67) 127 (5.00) 36 (1.42) 17 (0.67) 86 (3.39) 100 (3.94) N IO G A RD ER KE L E RC L E B I E UV ER T N FER V I GH M CO E P CO T E 13 (0.51) 18 (0.71) 16 (063) 170 (6.69) 40 (1.57) E T QU AN E' T H E N W ! Cover locking screw NS L ES C C I R IR C U S ON T S O I TS AL I V U S T E E CU T S I o 65 (2.56) To remote seal 135 (5.31) Min. Bend Radius 150 (6) Sensors H, M, P, Q, S Electrical connections HART Version Internal ground termination point M+ - 0 2 3 4 7 6 5 9 60 40 20 0 Remote indicator 8 10 80 % 10 0 Kent-Taylor Line load M + 3 4 2 8 1 7 5 6 Harting pin (male) identification + + 250 ohm min GND TEST COMM - 691HT External ground termination point F1 F2 + Test points 4 to 20mA F3 CONF SERIAL LINK TRIM Hand-held communicator - F4 PV REVIEW - + Power source A B C D E F G H I 1 2 3 J K L M N O P Q R 4 5 6 S T U V W X Y Z # 7 8 9 @ % & / + - 0 Optional Receiver HART hand-held communicator may be connected at any wiring termination point in the loop, providing the minimum resistance is 250 ohm. If this is less than 250 ohm, additional resistance should be added to allow communications 13 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 BASIC ORDERING INFORMATION model 268DR Safety Differential Pressure Transmitter with remote seal(s) Select one character or set of characters from each category and specify complete catalog number. Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required. Quote separately one or two seals as required. BASE MODEL - 1st to 5th characters 2 6 8 D R X S X X X X X Safety Differential Pressure Transmitter with remote seal(s) - BASE ACCURACY 0.075% SENSOR - Span limits - 6th character 0.2 and 4kPa 2 and 40mbar 0.54 and 16 kPa 5.4 and 160mbar 0.67 and 40kPa 6.7 and 400mbar 1.1 and 65kPa 11 and 650mbar 2.67 and 160kPa 26.7 and 1600mbar 10 and 600kPa 0.1 and 6bar 40 and 2400kPa 0.4 and 24bar 134 and 8000kPa 1.34 and 80bar 267 and 16000kPa 2.67 and 160bar 0.8 and 16inH2O 2.16 and 64inH2O 2.67 and 160inH2O 4.35 and 260inH2O 10.7 and 642inH2O 1.45 and 87psi 5.8 and 348psi 19.4 and 1160psi 38.7 and 2320psi B E F G H M P Q S Use code - 7th character Diaphragm material / Fill fluid (wetted parts) - 8th character AISI 316 L ss Silicone oil (one seal to be quoted separately) Hastelloy C276TM (on AISI seat) Silicone oil (one seal to be quoted separately) Silicone oil (one seal to be quoted separately) Hastelloy C276TM (one seal to be quoted separately) Monel 400TM Silicone oil Silicone oil (one seal to be quoted separately) Tantalum (one seal to be quoted separately) AISI 316 L ss Inert fluid-Galden Hastelloy C276TM (on AISI seat) Inert fluid-Galden (one seal to be quoted separately) Inert fluid-Galden (one seal to be quoted separately) Hastelloy C276TM (one seal to be quoted separately) Monel 400TM Inert fluid-Galden (one seal to be quoted separately) Inert fluid-Galden Tantalum Inert fluid-Halocarbon (one seal to be quoted separately) AISI 316 L ss Hastelloy C276TM (on AISI seat) Inert fluid-Halocarbon (one seal to be quoted separately) Hastelloy C276TM Inert fluid-Halocarbon one seal to be quoted separately) Inert fluid-Halocarbon (one seal to be quoted separately) Monel 400TM Tantalum Inert fluid-Halocarbon (one seal to be quoted separately) Silicone oil (two seals to be quoted separately) AISI 316 L ss (two seals to be quoted separately) AISI 316 L ss Inert fluid-Galden AISI 316 L ss Inert fluid-Halocarbon (two seals to be quoted separately) th Process flanges/adapters material and connection (wetted parts) - 9 character AISI 316 L ss for two seals construction AISI 316 L ss (Horizontal connection) AISI 316 L ss (Horizontal connection) Hastelloy C276TM (Horizontal connection) Hastelloy C276TM (Horizontal connection) Monel 400TM (Horizontal connection) Monel 400TM (Horizontal connection) 1 /4in NPT-f direct (7/16in UNF U.S. drilling) 1 /2in NPT-f through adapter (7/16in UNF U.S. drilling) 1 /4in NPT-f direct (7/16in UNF U.S. drilling) 1 /2in NPT-f through adapter (7/16in UNF U.S. drilling) 1 /4in NPT-f direct (7/16in UNF U.S. drilling) 1 /2in NPT-f through adapter (7/16in UNF U.S. drilling) (Note 3) (Note 3) (Note 3) (Note 3) (Note 3) (Notes 1, 3) (Notes 1, 3) (Notes 1, 3) (Notes 1, 3) (Notes 1, 3) (Notes 1, 3) (Notes 1, 3) (Notes 1, 3) (Notes 1, 3) (Notes 1, 3) (Note 2) (Notes 1, 3) (Notes 1, 3) NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE NACE (Note 4) (Note 5) (Note 5) (Note 5) (Note 5) (Note 5) (Note 5) NACE NACE NACE NACE NACE NACE NACE (Note 4) (Note 5) (Notes 1, 5) (Note 5) (Notes 1, 5) NACE S H K M T A B F C D L Q P 4 5 R 2 W R A B D E G H Bolts/Gasket (wetted parts) - 10th character AISI 316 ss (NACE) without gaskets for two seals construction AISI 316 ss AISI 316 ss AISI 316 ss (NACE) AISI 316 ss (NACE) Housing material and electrical connection - 11th character Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) Aluminium alloy (DIN version) Aluminium alloy (DIN version) Aluminium alloy (DIN version) Output/Additional options - 12th character HART digital communication and 4 to 20mA (SIL 2) HART digital communication and 4 to 20mA (SIL 2) 14 VitonTM PTFE VitonTM PTFE NACE NACE 1 /2in NPT M20 x 1.5 (CM 20) Pg 13.5 1 /2in GK Harting Han connector 1 /2in NPT M20 x 1.5 (CM 20) Pg 13.5 1 /2in GK Harting Han connector 1 /2in NPT M20 x 1.5 (CM 20) Pg 13.5 1 /2in GK M20 x 1.5 (CM 20) Pg 13.5 Harting Han connector A B D C E H L N M P S T V U J Y K (Note 6) (general purpose only) (Note 6) (general purpose only) (general purpose only) (general purpose only) (Note 6) (general purpose only) No additional options Options requested (to be ordered by "Additional ordering code") R 1 2 3 4 (Note 7) S 4 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 ADDITIONAL ORDERING INFORMATION for model 268DR Add one or more 2-digit code(s) after the basic ordering information to select all required options XX XX XX XX XX XX XX XX XX XX XX XX XX Drain/vent valve (material and position) (wetted parts) AISI 316 L ss on process axis (Note 8) AISI 316 L ss on flange side top (Note 8) AISI 316 L ss on flange side bottom (Note 8) Hastelloy C276TM on process axis (Note 9) Hastelloy C276TM on flange side top (Note 9) Hastelloy C276TM on flange side bottom (Note 9) Monel 400TM on process axis (Note 10) Monel 400TM on flange side top (Note 10) Monel 400TM on flange side bottom (Note 10) Electrical certification ATEX Group II Category 1 G - Intrinsic Safety EEx ia ATEX Group II Category 1/2 GD - Flameproof EEx d Factory Mutual (FM) approval (only with 1/2in NPT, M20 and Pg 13.5 electrical connection) Output meter NACE NACE NACE NACE NACE NACE NACE NACE NACE V1 V2 V3 V4 V5 V6 V7 V8 V9 E1 E2 E6 ProMeter, Standard calibration ProMeter, Special calibration Analog output indicator linear 0-100% scale Analog output indicator square root 0-10 scale Analog output indicator, special graduation (to be specified for linear scale) Analog output indicator, special graduation (to be specified for square root scale) Programmable signal meter and HART configurator (CoMeter) Programmable signal meter and HART configurator (CoMeter - customer configuration) Mounting bracket (shape and material) For pipe mounting (Not suitable for AISI housing) Carbon steel For pipe mounting (Not suitable for AISI housing) AISI 316 L ss For wall mounting (Not suitable for AISI housing) Carbon steel For wall mounting (Not suitable for AISI housing) AISI 316 L ss Flat type for box AISI 316 L ss Surge Surge/Transient Protector D1 D2 D3 D4 D5 D6 D7 D8 B1 B2 B3 B4 B5 S1 Operating manual German Italian French Labels & tag language German Italian French Additional tag plate Laser printing of tag on stainless steel plate M1 M2 M4 T1 T2 T4 I2 Configuration Standard - Pressure = inH2O/psi at 20 C; Temperature = deg. F Standard - Pressure = inH2O/psi at 4 C; Temperature = deg. F Standard - Pressure = inH2O/psi at 20 C; Temperature = deg.C Standard - Pressure = inH2O/psi at 4 C; Temperature = deg. C Custom Preparation procedure Oxygen service cleaning (only available with inert fill and PTFE gasket) - Pmax =12MPa for Galden or 9MPa for Halocarbon; Tmax = 60 C/140 Hydrogen service preparation Special services preparation N2 N3 N4 N5 N6 F P1 P2 P4 Certificates Inspection certificate EN 10204-3.1.B of calibration (9-point) Certificate of compliance with the order EN 10204-2.1 of instrument design C1 C6 Material traceability Certificate of compliance with the order EN 10204-2.1 of process wetted parts Inspection certificate EN 10204-3.1.B of process wetted parts H1 H3 Connector Harting Han - straight entry Harting Han - angle entry (Note 11) (Note 11) U3 U4 15 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR Note 1: Suitable for oxygen service Note 2: Not wetted - Hastelloy C276TM on AISI seat for sensor code B Note 3: Not wetted - Not available with sensor code B Note 4: Not available with diaphragm/fill code S, H, K, M, T, A, B, F, C, D, L, Q, P, 4, 5 Note 5: Not available with diaphragm/fill code R, 2, W. Note 6: Select type in additional ordering code Note 7: Not available with Electronic Housing code P, E and K Note 8: Not available with Process flanges/adapters code D, E, G, H, R Note 9: Not available with Process flanges/adapters code A, B, G, H, R SS/268XR_2 Note 10: Not available with Process flanges/adapters code A, B, D, E, R Note 11: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B, J, Y TM Hastelloy is a Cabot Corporation trademark TM Monel is an International Nickel Co. trademark TM Viton is a Dupont de Nemour trademark TM Galden is a Montefluos trademark TM Halocarbon is a Halocarbon Products Co. trademark Standard delivery items (can be differently specified by additional ordering code) - Adapters supplied loose - Plug on axis (no drain/vent valves) - General purpose (no electrical certification) - No meter/display, no mounting bracket, no surge protection - English manual and labels - Configuration with kPa and deg. C units - No test, inspection or material traceability certificates THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'S RESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING. 16 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 BASIC ORDERING INFORMATION model 268PR Safety Gauge Pressure Transmitter with remote seal Select one character or set of characters from each category and specify complete catalog number. Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required. BASE MODEL - 1st to 5th characters 2 6 8 P R X S X X X X X Safety Gauge Pressure Transmitter with remote seal - BASE ACCURACY 0.075% SENSOR - Span limits - 6th character 0.54 and 16 kPa 5.4 and 160mbar 0.67 and 40kPa 6.7 and 400mbar 1.1 and 65kPa 11 and 650mbar 2.67 and 160kPa 26.7 and 1600mbar 10 and 600kPa 0.1 and 6bar 40 and 2400kPa 0.4 and 24bar 134 and 8000kPa 1.34 and 80bar 267 and 16000kPa 2.67 and 160bar E F G H M P Q S 2.16 and 64inH2O 2.67 and 160inH2O 4.35 and 260inH2O 10.7 and 642inH2O 1.45 and 87psi 5.8 and 348psi 19.4 and 1160psi 38.7 and 2320psi Use code - 7th character Diaphragm material / Fill fluid - 8th character AISI 316 L ss Silicone oil AISI 316 L ss Inert fluid - Galden AISI 316 L ss Inert fluid - Halocarbon Process flanges/adapters material - 9th character (one seal to be quoted separately) (one seal to be quoted separately) (one seal to be quoted separately) R 2 W (Note 1) (Note 1) AISI 316 L ss for seal construction R Bolts - 10th character AISI 316 ss (NACE) without gaskets for seal construction NACE R Housing material and electrical connection - 11th character Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) Aluminium alloy (DIN version) Aluminium alloy (DIN version) Aluminium alloy (DIN version) Output/Additional options - 12th character HART digital communication and 4 to 20mA (SIL 2) HART digital communication and 4 to 20mA (SIL 2) 1 /2in NPT M20 x 1.5 (CM 20) Pg 13.5 1 /2in GK Harting Han connector 1 /2in NPT M20 x 1.5 (CM 20) Pg 13.5 1 /2in GK Harting Han connector 1 /2in NPT M20 x 1.5 (CM20) Pg 13.5 1 /2in GK M20 x 1.5 (CM 20) Pg 13.5 Harting Han connector (Note 2) (general purpose only) (Note 2) (general purpose only) (general purpose only) (general purpose only) (Note 2) (general purpose only) No additional options Options requested (to be ordered by "Additional ordering code") (Note 3) A B D C E H L N M P S T V U J Y K S 4 17 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 ADDITIONAL ORDERING INFORMATION for model 268PR Add one or more 2-digit code(s) after the basic ordering information to select all required options XX XX XX XX XX XX XX XX XX XX XX XX XX Electrical certification ATEX Group II Category 1 G - Intrinsic Safety EEx ia ATEX Group II Category 1/2 GD - Flameproof EEx d Factory Mutual (FM) approval (only with 1/2in NPT, M20 and Pg 13.5 electrical connection) Output meter E1 E2 E6 ProMeter, Standard calibration ProMeter, Special calibration Analog output indicator linear 0-100% scale Analog output indicator, special graduation (to be specified for linear scale) Programmable signal meter and HART configurator (CoMeter) Programmable signal meter and HART configurator (CoMeter - customer configuration) Mounting bracket (shape and material) For pipe mounting (Not suitable for AISI housing) Carbon steel For pipe mounting (Not suitable for AISI housing) AISI 316 L ss For wall mounting (Not suitable for AISI housing) Carbon steel For wall mounting (Not suitable for AISI housing) AISI 316 L ss Flat type for box AISI 316 L ss Surge Surge/Transient Protector D1 D2 D3 D5 D7 D8 B1 B2 B3 B4 B5 S1 Operating manual German Italian French Labels & tag language German Italian French Additional tag plate Laser printing of tag on stainless steel plate M1 M2 M4 T1 T2 T4 I2 Configuration Standard - Pressure = inH2O/psi at 20 C; Temperature = deg. F Standard - Pressure = inH2O/psi at 4 C; Temperature = deg. F Standard - Pressure = inH2O/psi at 20 C; Temperature = deg.C Standard - Pressure = inH2O/psi at 4 C; Temperature = deg. C Custom Preparation procedure Oxygen service cleaning (only available with inert fill) - Pmax =12MPa for Galden or 9MPa for Halocarbon; Tmax = 60 C/140 F Hydrogen service preparation Special services preparation N2 N3 N4 N5 N6 P1 P2 P4 Certificates Inspection certificate EN 10204-3.1.B of calibration (9-point) Certificate of compliance with the order EN 10204-2.1 of instrument design C1 C6 Material traceability Certificate of compliance with the order EN 10204-2.1 of process wetted parts Inspection certificate EN 10204-3.1.B of process wetted parts H1 H3 Connector Harting Han - straight entry Harting Han - angle entry 18 (Note 4) (Note 4) U3 U4 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR Note 1: Suitable for oxygen service Note 2: Select type in additional ordering code Note 3: Not available with Electronic Housing code P, E and K Note 4: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B, J, Y TM Galden is a Montefluos trademark TM Halocarbon is a Halocarbon Products Co. trademark SS/268XR_2 Standard delivery items (can be differently specified by additional ordering code) - General purpose (no electrical certification) - No meter/display, no mounting bracket, no surge protection - English manual and labels - Configuration with kPa and deg. C units - No test, inspection or material traceability certificates THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'S RESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING. 19 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 BASIC ORDERING INFORMATION model 268HR Safety Gauge Pressure Transmitter with remote seal Select one character or set of characters from each category and specify complete catalog number. Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required. BASE MODEL - 1st to 5th characters 2 6 8 H R X X X X X Safety Pressure Transmitter with remote seal - BASE ACCURACY 0.075% SENSOR - Span limits - 6th character 1.1 and 65 kPa 11 and 650mbar 2.67 and 160kPa 26.7 and 1600mbar 10 and 600kPa 0.1 and 6bar 40 and 2400kPa 0.4 and 24bar 134 and 8000kPa 1.34 and 80bar 267 and 16000kPa 2.67 and 160bar Diaphragm material / Fill fluid - 7th character AISI 316 L ss AISI 316 L ss AISI 316 L ss Process connection - 8th character Silicone oil Inert fluid - Galden Inert fluid - Halocarbon Remote seal (except button type) (one seal to be quoted separately) Button type remote seal (one button seal to be quoted separately) th Housing material and electrical connection - 9 character Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) G H M P Q S 4.35 and 260inH2O 10.7 and 642inH2O 1.45 and 87psi 5.8 and 348psi 19.4 and 1160psi 38.7 and 2320psi R 2 W (Note 1) (Note 1) R G (Note 2) 1 /2in NPT M20 x 1.5 (CM 20) Pg 13.5 1 /2in GK Harting Han connector 1 /2in NPT M20 x 1.5 (CM 20) Pg 13.5 1 /2in GK Harting Han connector 1 /2in NPT M20 x 1.5 (CM20) Pg 13.5 1 /2in GK (Note 3) (general purpose only) (Note 3) (general purpose only) A B D C E H L N M P S T V U Output/Additional options - 10th character HART digital communication and 4 to 20mA (SIL 2) HART digital communication and 4 to 20mA (SIL 2) 20 No additional options Options requested (to be ordered by "Additional ordering code") (Note 4) S 4 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 ADDITIONAL ORDERING INFORMATION for model 268HR Add one or more 2-digit code(s) after the basic ordering information to select all required options XX XX XX XX XX XX XX XX XX XX XX XX XX Electrical certification ATEX Group II Category 1 GD - Intrinsic Safety EEx ia ATEX Group II Category 1/2 GD - Flameproof EEx d Factory Mutual (FM) approval (only with 1/2in NPT, M20 and Pg 13.5 electrical connection) Output meter ProMeter, Standard calibration ProMeter, Special calibration Analog output indicator linear 0-100% scale Analog output indicator, special graduation (to be specified for linear scale) Programmable signal meter and HART configurator (CoMeter) Programmable signal meter and HART configurator (CoMeter - customer configuration) E1 E2 E6 D1 D2 D3 D5 D7 D8 Mounting bracket (shape and material) For pipe mounting For pipe mounting (Not suitable for AISI housing) Carbon steel AISI 316 L ss B1 B2 Surge Surge/Transient Protector S1 Operating manual German Italian French M1 M2 M4 Labels & tag language German Italian French T1 T2 T4 Additional tag plate Laser printing of tag on stainless steel plate I2 Configuration Standard - Pressure = inH2O/psi at 20 C; Temperature = deg. F Standard - Pressure = inH2O/psi at 4 C; Temperature = deg. F Standard - Pressure = inH2O/psi at 20 C; Temperature = deg.C Standard - Pressure = inH2O/psi at 4 C; Temperature = deg. C Custom N2 N3 N4 N5 N6 Preparation procedure Oxygen service cleaning (only available with inert fill) - Pmax =12MPa for Galden or 9MPa for Halocarbon; Tmax = 60 C/140 F P1 Certificates Inspection certificate EN 10204-3.1.B of calibration (9-point) Certificate of compliance with the order EN 10204-2.1 of instrument design C1 C6 Material traceability Certificate of compliance with the order EN 10204-2.1 of process wetted parts Inspection certificate EN 10204-3.1.B of process wetted parts H1 H3 Connector Harting Han - straight entry Harting Han - angle entry (Note 5) (Note 5) U3 U4 21 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR Note 1: Suitable for oxygen service Note 2: Not available with sensor code G, H, M, P Note 3: Select type in additional ordering code Note 4: Not available with Electronic Housing code P, E Note 5: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B TM Galden is a Montefluos trademark TM Halocarbon is a Halocarbon Products Co. trademark SS/268XR_2 Standard delivery items (can be differently specified by additional ordering code) - General purpose (no electrical certification) - No meter/display, no mounting bracket, no surge protection - English manual and labels - Configuration with kPa and deg. C units - No test, inspection or material traceability certificates THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'S RESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING. 22 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 BASIC ORDERING INFORMATION model 268VR Safety Absolute Pressure Transmitter with remote seal Select one character or set of characters from each category and specify complete catalog number. Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required. BASE MODEL - 1st to 5th characters 2 6 8 V R X S X X X X X Safety Absolute Pressure Transmitter with remote seal - BASE ACCURACY 0.075% SENSOR - Span limits - 6th character 0.54 and 16 kPa 5.4 and 160mbar 0.67 and 40kPa 6.7 and 400mbar 1.1 and 65kPa 11 and 650mbar 2.67 and 160kPa 26.7 and 1600mbar 10 and 600kPa 0.1 and 6bar 40 and 2400kPa 0.4 and 24bar 134 and 8000kPa 1.34 and 80bar 267 and 16000kPa 2.67 and 160bar 4 and 120mmHg 5 and 300 mmHg 8 and 480 mmHg 20 and 1200 mmHg 1.45 and 87psi 5.8 and 348psi 19.4 and 1160psi 38.7 and 2320psi E F G H M P Q S Use code - 7th character Diaphragm material / Fill fluid - 8th character AISI 316 L ss Silicone oil (one seal except union type to be quoted separately) AISI 316 L ss Inert fluid-Galden (one seal except union type to be quoted separately) AISI 316 L ss Inert fluid-Halocarbon (one seal except union type to be quoted separately) th Process flanges/adapters material - 9 character R 2 W (Note 1) (Note 1) AISI 316 L ss for seal construction R th Bolts - 10 character AISI 316 ss (NACE) without gaskets for seal construction NACE R Housing material and electrical connection - 11th character Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) Aluminium alloy (DIN version) Aluminium alloy (DIN version) Aluminium alloy (DIN version) Output/Additional options - 12th character 1 /2in NPT M20 x 1.5 (CM 20) Pg 13.5 1 /2in GK Harting Han connector 1 /2in NPT M20 x 1.5 (CM 20) Pg 13.5 1 /2in GK Harting Han connector 1 /2in NPT M20 x 1.5 (CM20) Pg 13.5 1 /2in GK M20 x 1.5 (CM 20) Pg 13.5 Harting Han connector A B D C E H L N M P S T V U J Y K (Note 2) (general purpose only) (Note 2) (general purpose only) (general purpose only) (general purpose only) (Note 2) (general purpose only) HART digital communication and 4 to 20mA (SIL 2) No additional options HART digital communication and 4 to 20mA (SIL 2) Options requested (to be ordered by "Additional ordering code") (Note 3) S 4 23 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 ADDITIONAL ORDERING INFORMATION for model 268VR Add one or more 2-digit code(s) after the basic ordering information to select all required options XX XX XX XX XX XX XX XX XX XX XX XX XX Electrical certification ATEX Group II Category 1 G - Intrinsic Safety EEx ia ATEX Group II Category 1/2 GD - Flameproof EEx d Factory Mutual (FM) approval (only with 1/2in NPT, M20 and Pg 13.5 electrical connection) Output meter E1 E2 E6 ProMeter, Standard calibration ProMeter, Special calibration Analog output indicator linear 0-100% scale Analog output indicator, special graduation (to be specified for linear scale) Programmable signal meter and HART configurator (CoMeter) Programmable signal meter and HART configurator (CoMeter - customer configuration) Mounting bracket (shape and material) For pipe mounting (Not suitable for AISI housing) Carbon steel For pipe mounting (Not suitable for AISI housing) AISI 316 L ss For wall mounting (Not suitable for AISI housing) Carbon steel For wall mounting (Not suitable for AISI housing) AISI 316 L ss Flat type for box AISI 316 L ss Surge Surge/Transient Protector D1 D2 D3 D5 D7 D8 B1 B2 B3 B4 B5 S1 Operating manual German Italian French Labels & tag language German Italian French Additional tag plate Laser printing of tag on stainless steel plate M1 M2 M4 T1 T2 T4 I2 Configuration Standard - Pressure = inH2O/psi at 20 C; Temperature = deg. F Standard - Pressure = inH2O/psi at 4 C; Temperature = deg. F Standard - Pressure = inH2O/psi at 20 C; Temperature = deg.C Standard - Pressure = inH2O/psi at 4 C; Temperature = deg. C Custom Preparation procedure Oxygen service cleaning (only available with inert fill) - Pmax =12MPa for Galden or 9MPa for Halocarbon; Tmax = 60 C/140 F Hydrogen service preparation Special services preparation N2 N3 N4 N5 N6 P1 P2 P4 Certificates Inspection certificate EN 10204-3.1.B of calibration (9-point) Certificate of compliance with the order EN 10204-2.1 of instrument design C1 C6 Material traceability Certificate of compliance with the order EN 10204-2.1 of process wetted parts Inspection certificate EN 10204-3.1.B of process wetted parts H1 H3 Connector Harting Han - straight entry Harting Han - angle entry 24 (Note 4) (Note 4) U3 U4 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR Note 1: Suitable for oxygen service Note 2: Select type in additional ordering code Note 3: Not available with Electronic Housing code P, E and K Note 4: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B, J, Y TM Galden is a Montefluos trademark TM Halocarbon is a Halocarbon Products Co. trademark SS/268XR_2 Standard delivery items (can be differently specified by additional ordering code) - General purpose (no electrical certification) - No meter/display, no mounting bracket, no surge protection - English manual and labels - Configuration with kPa and deg. C units - No test, inspection or material traceability certificates THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'S RESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING. 25 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 BASIC ORDERING INFORMATION model 268NR Safety Absolute Pressure Transmitter with remote seal Select one character or set of characters from each category and specify complete catalog number. Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required. BASE MODEL - 1st to 5th characters 2 6 8 N R X X X X X Safety Absolute Pressure Transmitter with remote seal - BASE ACCURACY 0.075% SENSOR - Span limits - 6th character 1.1 and 65kPa 11 and 650mbar 2.67 and 160kPa 26.7 and 1600mbar 10 and 600kPa 0.1 and 6bar 40 and 2400kPa 0.4 and 24bar 134 and 8000kPa 1.34 and 80bar 267 and 16000kPa 2.67 and 160bar Diaphragm material / Fill fluid - 7th character AISI 316 L ss AISI 316 L ss AISI 316 L ss Process connection - 8th character 8 and 480mmHg 20 and 1200mmHg 1.45 and 87psi 5.8 and 348psi 19.4 and 1160psi 38.7 and 2320psi Silicone oil Inert fluid - Galden Inert fluid - Halocarbon G H M P Q S R 2 W (Note 1) (Note 1) Remote seal (one seal except button and union types to be quoted separately) Button type remote seal (one button seal to be quoted separately) (Note 2) th Housing material and electrical connection - 9 character Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) Aluminium alloy copper-free (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) AISI 316 L ss (Barrel version) Aluminium alloy (DIN version) Aluminium alloy (DIN version) Aluminium alloy (DIN version) R G 1 /2in NPT M20 x 1.5 (CM 20) Pg 13.5 1 /2in GK Harting Han connector 1 /2in NPT M20 x 1.5 (CM 20) Pg 13.5 1 /2in GK Harting Han connector 1 /2in NPT M20 x 1.5 (CM20) Pg 13.5 1 /2in GK M20 x 1.5 (CM 20) Pg 13.5 Harting Han connector A B D C E H L N M P S T V U J Y K (Note 3) (general purpose only) (Note 3) (general purpose only) (general purpose only) (general purpose only) (Note 3) (general purpose only) Output/Additional options - 10th character HART digital communication and 4 to 20mA (SIL 2) HART digital communication and 4 to 20mA (SIL 2) 26 No additional options Options requested (to be ordered by "Additional ordering code") (Note 4) S 4 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 ADDITIONAL ORDERING INFORMATION for model 268NR Add one or more 2-digit code(s) after the basic ordering information to select all required options XX XX XX XX XX XX XX XX XX XX XX XX XX Electrical certification ATEX Group II Category 1 GD - Intrinsic Safety EEx ia ATEX Group II Category 1/2 GD - Flameproof EEx d Factory Mutual (FM) approval (only with 1/2in NPT, M20 and Pg 13.5 electrical connection) Output meter ProMeter, Standard calibration ProMeter, Special calibration Analog output indicator linear 0-100% scale Analog output indicator, special graduation (to be specified for linear scale) Programmable signal meter and HART configurator (CoMeter) Programmable signal meter and HART configurator (CoMeter - customer configuration) E1 E2 E6 D1 D2 D3 D5 D7 D8 Mounting bracket (shape and material) For pipe mounting For pipe mounting (Not suitable for AISI housing) Carbon steel AISI 316 L ss B1 B2 Surge Surge/Transient Protector S1 Operating manual German Italian French M1 M2 M4 Labels & tag language German Italian French T1 T2 T4 Additional tag plate Laser printing of tag on stainless steel plate I2 Configuration Standard - Pressure = inH2O/psi at 20 C; Temperature = deg. F Standard - Pressure = inH2O/psi at 4 C; Temperature = deg. F Standard - Pressure = inH2O/psi at 20 C; Temperature = deg.C Standard - Pressure = inH2O/psi at 4 C; Temperature = deg. C Custom N2 N3 N4 N5 N6 Preparation procedure Oxygen service cleaning (only available with inert fill) - Pmax =12MPa for Galden or 9MPa for Halocarbon; Tmax = 60 C/140 F P1 Certificates Inspection certificate EN 10204-3.1.B of calibration (9-point) Certificate of compliance with the order EN 10204-2.1 of instrument design C1 C6 Material traceability Certificate of compliance with the order EN 10204-2.1 of process wetted parts Inspection certificate EN 10204-3.1.B of process wetted parts H1 H3 Connector Harting Han - straight entry Harting Han - angle entry (Note 5) (Note 5) U3 U4 27 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR Note 1: Suitable for oxygen service Note 2: Not available with sensor code G, H, M, P Note 3: Select type in additional ordering code Note 4: Not available with Electronic Housing code P, E Note 5: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B TM Galden is a Montefluos trademark TM Halocarbon is a Halocarbon Products Co. trademark SS/268XR_2 Standard delivery items (can be differently specified by additional ordering code) - General purpose (no electrical certification) - No meter/display, no mounting bracket, no surge protection - English manual and labels - Configuration with kPa and deg. C units - No test, inspection or material traceability certificates THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'S RESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING. 28 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 29 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR 30 SS/268XR_2 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 31 2600T Pressure Transmitters Model 268DR, 268PR, 268HR, 268VR, 268NR SS/268XR_2 The Company's policy is one of continuous product improvement and the right is reserved to modify the information contained herein without notice. ABB has Sales & Customer Support expertise in over 100 countries worldwide Printed in Italy (01.04) www.abb.com/instrumentation SS/268XR_2 (c) ABB 2004 ABB Ltd Howard Road, St. Neots Cambridgeshire, PE19 3EU UK Tel: +44(0)1480 475321 Fax: +44(0)1480 217948 ABB Inc. 125 E. County Line Road Warminster, PA 18974 USA Tel: +1 215 674 6000 Fax: +1 215 674 7183 ABB SACE spa Business Unit Instrumentation Via Statale 113 22016 Lenno (CO) Italy Tel: +39 0344 58111 Fax: +39 0344 56278