HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES FEATURES * HIGH ISOLATION VOLTAGE: (BV = 5 000 Vr.m.s.) PS2561A-1 PS2561AL-1 PS2561AL1-1 PS2561AL2-1 DESCRIPTION NEC's PS2561A-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. * ORDERING NUMBER OF TAPING PRODUCT: PS2561AL-1-E3, E4, F3, F4, PS2561AL2-1-E3, E4, PS2561AL-1-1-E3,E4 * UL, BSI, CSA, NEMKO, DEMKO, SEMKO, FIMKO, The PS2561A-1 is in a plastic DIP (Dual In-line Package) and the PS2561AL-1 is lead bending type (Gull-wing) for surface mount. APPROVED * VDE0884 APPROVED (OPTION) The PS2561AL1-1 is lead bending L1 type for wide creepage through hole mounting and the PS2561AL2-1 is lead bending L2 type for wide creepage surface mount. (Gull-wing). APPLICATIONS * Power supply * Telephone/FAX. * FA/OA equipment * Programmable logic controller California Eastern Laboratories PS2561A-1,PS2561AL-1, PS2561AL1-1,PS2561AL2-1 PACKAGE DIMENSIONS (UNIT : mm) DIP Type PS2561A-1 4.60.35 PS2561AL1-1 TOP VIEW 4 3 4 2 7.62 3 1. Anode 2. Cathode 3. Emitter 4. Collector 6.50.5 6.50.5 1 TOP VIEW 4.60.35 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 3.15 3.85 0.35 0.4 0 to 15 +0.1 0.25 -0.05 1.250.15 0.500.10 0.25 M 3.5 0.3 10.16 3.50.3 3.20.4 4.150.4 Long Creepage Distance Lead Bend for Through Hole Mount 0.500.1 0.25 M 1.250.15 +0.1 0.25-0.05 2.54 0 to 15 2.54 Lead Bending Type for Surface Mount Long Creepage Distance (Gull-Wing) Lead Bend for Surface Mount PS2561AL-1 PS2561AL2-1 TOP VIEW 4 1. Anode 2. Cathode 3. Emitter 4. Collector 0.25 M 2.54 0.15 0.250.2 3.50.3 0.1 +0.1 -0.05 0.25 +0.1 -0.05 3.50.3 0.90.25 9.600.4 2 0.25 1.250.15 0.25 M +0.1 2 1 1.250.15 3 6.50.5 6.50.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 TOP VIEW 4.60.35 3 0.25-0.05 4 4.60.35 0.90.25 10.16 +0.2 2.54 11.8-0.5 PS2561A-1,PS2561AL-1, PS2561AL1-1,PS2561AL2-1 MARKING EXAMPLE No. 1 pin Mark 2561A N 301 N Assembly Lot 3 01 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package New PKG Made in Japan Made in Taiwan E H PS2561A-1,PS2561AL-1, PS2561AL1-1,PS2561AL2-1 ORDERING INFORMATION Part Number PS2561A-1 Package 4-pin DIP Packing Style Magazine case 100 pcs Safety Standard Approval Standard products PS2561AL-1 (UL, CSA, BSI, PS2561AL1-1 NEMKO, SEMKO, PS2561AL2-1 DEMKO, FIMKO PS2561AL-1-E3 Embossed Tape 1 000 pcs/reel approved) PS2561AL-1-E4 PS2561AL2-1-E3 Embossed Tape 1 000 pcs/reel PS2561AL2-1-E4 PS2561AL-1-F3 Embossed Tape 2 000 pcs/reel PS2561AL-1-F4 PS2561A-1-V Magazine case 100 pcs VDE0884 approved products (option) PS2561AL-1-V PS2561AL1-1-V PS2561AL2-1-V PS2561AL-1-V-E3 Embossed Tape 1 000 pcs/reel PS2561AL-1-V-E4 PS2561AL2-1-V-E3 Embossed Tape 1 000 pcs/reel PS2561AL2-1-V-E4 PS2561AL-1-V-F3 Embossed Tape 2 000 pcs/reel PS2561AL-1-V-F4 *1 For the application of the Safety Standard, following part number should be used. Appliction Part Number *1 PS2561A-1 PS2561A-1,PS2561AL-1, PS2561AL1-1,PS2561AL2-1 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Diode Parameter Symbol Ratings Unit Reverse Voltage VR 6 V Forward Current (DC) Power Dissipation Derating Transistor IF PD/C 30 mA 1.5 mW/C Power Dissipation PD 150 mW Peak Forward Current*1 IFP 0.5 A Collector to Emitter Voltage VCEO 70 V Emitter to Collector Voltage VECO 5 V Collector Current Power Dissipation Delay Power Dissipation IC PC/C 30 mA 1.5 mW/C PC 150 mW BV 5 000 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C Isolation Voltage*2 *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output PS2561A-1,PS2561AL-1, PS2561AL1-1,PS2561AL2-1 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Transistor Coupled Forward Voltage Symbol Conditions VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz Collector to Emitter Dark Current ICEO VCE = 70 V, IF = 0 mA Current Transfer Ratio (IC/IF)*1 CTR IF = 5 mA, VCE = 5 V Collector Saturation Voltage VCE (sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 tr Rise Time Fall Time *2 VCC = 10 V, IC = 2 mA, RL = 100 tf 50 to 300 (%) H : 80 to 160 (%) Q : 100 to 200 (%) W : 130 to 260 (%) *2 Test circuit for switching time Pulse Input VCC PW = 100 s Duty Cycle = 1/10 IF 50 TYP. MAX. Unit 1.2 1.4 V 5 10 50 0.13 VOUT RL = 100 A pF 100 nA 300 % 0.3 V 1011 0.4 pF 5 s 7 *1 CTR rank N : MIN. PS2561A-1,PS2561AL-1, PS2561AL1-1,PS2561AL2-1 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 200 1.5 mW/C 150 100 50 0 25 50 75 100 200 1.5 mW/C 150 100 50 0 125 25 100 TA = +100C +60C +25C Collector Current IC (mA) IF = 10 mA 5 0C -25C -55C 1 0.5 20 15 IF = 5 mA 10 5 IF = 2 mA IF = 1 mA 0.1 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0 1.5 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 10 000 IF = 10mA 1 000 VCE = 70 V 100 VCE = 24 V 10 1 0 25 50 75 100 Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 125 25 10 0.05 0.7 100 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE Forward Current IF (mA) 75 Ambient Temperature TA (C) Ambient Temperature TA (C) 50 50 IF = 5mA IF = 2mA 1 0.1 0 IF = 1mA 0.2 0.4 0.6 0.8 Collector Saturation Voltage VCE(sat) (V) 1.0 PS2561A-1,PS2561AL-1, PS2561AL1-1,PS2561AL2-1 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) CURRENT TRANSFER RATIO vs. FORWARD CURRENT 300 1.4 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 1.2 1.0 0.8 0.6 Normalized to 1.0 at TA = 25C, IF = 5 mA, VCE = 5 V CTR:130% CTR:270% 0.4 0.2 0 -50 -25 0 25 50 75 250 VCE = 5 V, n=2 200 Sample A B 150 100 50 0 0.01 100 Ambient Temperature TA (C) 1 10 100 Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 1 000 100 IC = 2 mA, VCC = 10 V, CTR = 216% IF = 5 mA, VCC = 5 V, CTR = 216% tf tr Switching Time t ( s) Switching Time t ( s) 0.1 10 td ts 1 tf 100 ts 10 tr 0.1 10 100 1 000 td 1 1 10 000 Load Resistance RL () 10 100 Load Resistance RL (k) FREQUENCY RESPONSE LONG TERM CTR DEGRADATION 5 1.2 0 1.0 -5 100 -10 300 -15 -20 RL = 1 k 0.8 TA = 25C 0.6 TA = 60C 0.4 0.2 IF = 5 mA, VCE = 5 V -25 0.1 1 10 100 1 000 Frequency f (kHz) Remark CTR (Relative Value) Normalized Gain GV IF = 5 mA (TYP.) The graphs indicate nominal characteristics. 0 10 102 103 Time (Hr) 104 105 PS2561A-1,PS2561AL-1, PS2561AL1-1,PS2561AL2-1 TAPING SPECIFICATIONS (UNIT : mm) 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2561AL-1-E3 PS2561AL-1-E4 Outline and Dimensions (Reel) 2.00.5 21.00.8 80.01.0 R 1.0 2542.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange PS2561A-1,PS2561AL-1, PS2561AL1-1,PS2561AL2-1 TAPING SPECIFICATIONS (UNIT : mm) 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2561AL-1-F3 PS2561AL-1-F4 Outline and Dimensions (Reel) 2.00.5 21.00.8 1001.0 R 1.0 3302.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 2 000 pcs/reel 15.9 to 19.4 Outer edge of flange PS2561A-1,PS2561AL-1, PS2561AL1-1,PS2561AL2-1 NOTES ON HANDLING (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 03/16/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd.