PART OBSOLETE - USE AP3211 and AP5100 Preliminary Datasheet OBSOLETE - PART DISCONTINUED 1.4MHz, 1.5A ASYNCHRONOUS DC-DC BUCK CONVERTER General Description Features The AP3211H is a 1.4MHz fixed frequency, current mode, PWM buck (step-down) DC-DC converter, capable of driving a 1.5A load with high efficiency, excellent line and load regulation. The device integrates N-channel power MOSFET switch with low on-resistance. Current mode control provides fast transient response and cycle-by-cycle current limit. * * * * * * * * * * A standard series of inductors are available from several different manufacturers optimized for use with the AP3211H. This feature greatly simplifies the design of switch-mode power supplies. AP3211H Input Voltage Range: 4.5V to 23V Fixed 1.4MHz Frequency High Efficiency: up to 92% Output Current: 1.5A Current Mode Control Built-in Over Current Protection Built-in Thermal Shutdown Function Built-in UVLO Function Built-in Over Voltage Protection Built-in Soft-start Applications The AP3211H is available in SOT-23-6 package. * * * LCD TV DPF Portable DVD SOT-23-6 Figure 1. Package Type of AP3211H Jun. 2014 Rev. 2. 4 BCD Semiconductor Manufacturing Limited 1 PART OBSOLETE - USE AP3211 and AP5100 Preliminary Datasheet 1.4MHz, 1.5A ASYNCHRONOUS DC-DC BUCK CONVERTER AP3211H OBSOLETE - PART DISCONTINUED Pin Configuration K Package (SOT-23-6) Pin 1 Mark BS 1 6 SW GND 2 5 IN FB 3 4 EN Figure 2. Pin Configuration of AP3211H (Top View) Pin Description Pin Number Pin Name 1 BS 2 GND 3 FB 4 EN 5 IN 6 SW Jun. 2014 Function Bootstrap pin. A bootstrap capacitor is connected between the BS pin and SW pin. The voltage across the bootstrap capacitor drives the internal high-side NMOS switch Ground pin Feedback pin. This pin is connected to an external resistor divider to program the system output voltage. When VFB exceeds 20% of the nominal regulation value of 0.81V, the OVP is triggered. When VFB0.25V, the oscillator frequency is lowered to realize short circuit protection Control input pin. Forcing this pin above 1.5V enables the IC. Forcing this pin below 0.4V shuts down the IC. When the IC is in shutdown mode, all functions are disabled to decrease the supply current below 1A Supply input pin. A capacitor should be connected between the IN pin and GND pin to keep the DC input voltage constant Power switch output pin. This pin is connected to the inductor and bootstrap capacitor Rev. 2. 4 BCD Semiconductor Manufacturing Limited 2 PART OBSOLETE - USE AP3211 and AP5100 Preliminary Datasheet 1.4MHz, 1.5A ASYNCHRONOUS DC-DC BUCK CONVERTER AP3211H OBSOLETE - PART DISCONTINUED Functional Block Diagram IN 5 SCHOTTKY FB CL GND 2 SS HICCUP 1 BOOSTRAP REGULATOR BS 2A/V OSC 1.4 MHz/ 460 KHz VDD/VDD1 REGULATOR VREF RAMP GENERATOR CS OSC 1pF S Q VLIMIT EN 4 3.3V CL REFERENCE VOLTAGE 27pF 1M 220k 6 SW R SS FB SWITCH / LDO R ERR AMP 3 PWM COMPARATOR Figure 3. Functional Block Diagram of AP3211H Ordering Information AP3211H - Circuit Type G1: Green Package K: SOT-23-6 TR: Tape & Reel Package Temperature Range SOT-23-6 -40 to 85C Part Number AP3211HKTR-G1 Marking ID GBK Packing Type Tape & Reel BCD Semiconductor's Pb-free products, as designated with "G1" suffix in the part number, are RoHS compliant and green. Jun. 2014 Rev. 2. 4 BCD Semiconductor Manufacturing Limited 3 PART OBSOLETE - USE AP3211 and AP5100 Preliminary Datasheet 1.4MHz, 1.5A ASYNCHRONOUS DC-DC BUCK CONVERTER AP3211H OBSOLETE - PART DISCONTINUED Absolute Maximum Ratings (Note 1) Parameter Symbol Value Unit Input Pin Voltage VIN -0.3 to 25 V EN Pin Voltage VEN -0.3 to VIN+0.3 V SW Pin Voltage VSW 26 V Bootstrap Pin Voltage VBS -0.3 to VSW+6 V Feedback Pin Voltage VFB -0.3 to 6 V TJ 150 C TSTG -65 to 150 C TLEAD 260 C JA 220 C/W Operating Junction Temperature Storage Temperature Lead Temperature (Soldering, 10sec) Thermal Resistance (Junction to Ambient) Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. Recommended Operating Conditions Parameter Symbol Min Max Unit Input Voltage VIN 4.5 23 V Operating Ambient Temperature TA -40 85 C Jun. 2014 Rev. 2. 4 BCD Semiconductor Manufacturing Limited 4 PART OBSOLETE - USE AP3211 and AP5100 Preliminary Datasheet 1.4MHz, 1.5A ASYNCHRONOUS DC-DC BUCK CONVERTER AP3211H OBSOLETE - PART DISCONTINUED Electrical Characteristics VIN=VEN=12V, VOUT=3.3V, TA=25C, unless otherwise specified. Parameter Symbol Input Voltage VIN Quiescent Current IQ Shutdown Supply Current ISHDN Feedback Voltage VFB Feedback Over Voltage Threshold VFBOV Feedback Bias Current IFB Conditions Min 4.5 VEN=0V 0.1 1.0 A 0.810 0.835 V 0.785 0.972 VFB=0.85V -0.1 Switch Current Limit ILIM 1.8 VENH 1.5 Oscillator Frequency ISW=1A VIN=23V, VEN=0V V 0.1 0.1 10 2.4 3.3 3.8 4.3 0.2 fOSC1 1.1 1.4 A A 0.4 VIN Rising A 0.385 VENL VHYS V mA ILEAK Input UVLO Hysteresis 23 1.1 Switch Leakage Current VUVLO Unit 0.8 RDSON Input UVLO Threshold Max VFB=0.9V Switch On-resistance EN Pin Threshold Typ V V V 1.7 MHz fOSC2 Short Circuit 460 kHz Max. Duty Cycle DMAX VFB=0.6V 90 % Min. Duty Cycle DMIN VFB=0.9V 0 % Minimum On Time tON 100 ns Thermal Shutdown TOTSD 160 C Thermal Shutdown Hysteresis THYS 20 C tSS 200 s Soft-start Time Note 2: RDSON , tON, TOTSD, THYS and tSS are guaranteed by design. Jun. 2014 Rev. 2. 4 BCD Semiconductor Manufacturing Limited 5 PART OBSOLETE - USE AP3211 and AP5100 Preliminary Datasheet 1.4MHz, 1.5A ASYNCHRONOUS DC-DC BUCK CONVERTER AP3211H TA=25C, VIN=12V, VOUT=3.3V, unless otherwise noted. 100 1.00 90 0.96 80 Quiescent Current (mA) 0.92 Efficiency (%) 70 60 50 40 30 20 0.88 0.84 0.80 0.76 0.72 10 0 0.01 0.1 0.68 -60 1 -40 -20 0 Output Current (A) 60 80 100 120 140 160 Figure 5. Quiescent Current vs. Case Temperature 0.88 3.36 0.80 3.32 Output Voltage (V) 3.40 0.72 0.64 0.56 0.48 3.28 3.24 3.20 3.16 -40 -20 0 20 40 60 80 100 120 140 3.12 0.0 160 o 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Output Current (A) Case Temperature ( C) Figure 6. Feedback Voltage vs. Case Temperature Jun. 2014 40 o 0.96 0.40 -60 20 Case Temperature ( C) Figure 4. Efficiency vs. Output Current Feedback Voltage (V) OBSOLETE - PART DISCONTINUED Typical Performance Characteristics Figure 7. Output Voltage vs. Output Current Rev. 2. 4 BCD Semiconductor Manufacturing Limited 6 PART OBSOLETE - USE AP3211 and AP5100 Preliminary Datasheet 1.4MHz, 1.5A ASYNCHRONOUS DC-DC BUCK CONVERTER AP3211H OBSOLETE - PART DISCONTINUED Typical Performance Characteristics (Continued) TA=25C, VIN=12V, VOUT=3.3V, unless otherwise noted. VOUT_AC (10mV/div) IL (500mA/div) VSW (5V/div) VOUT_AC (100mV/div) IOUT (500mA/div) Time (400ns/div) Time (200s/div) Figure 8. Output Ripple (IOUT=1.5A) Figure 9. Load Transient (IOUT=1A to 1.5A) VEN (5V/div) VOUT (2V/div) VEN (5V/div) VOUT (2V/div) VSW (5V/div) VSW (5V/div) Time (100s/div) Time (40s/div) Figure 10. Enable Turn on Characteristic Jun. 2014 Figure 11. Enable Turn off Characteristic Rev. 2. 4 BCD Semiconductor Manufacturing Limited 7 PART OBSOLETE - USE AP3211 and AP5100 Preliminary Datasheet 1.4MHz, 1.5A ASYNCHRONOUS DC-DC BUCK CONVERTER AP3211H OBSOLETE - PART DISCONTINUED Typical Performance Characteristics (Continued) TA=25C, VIN=12V, VOUT=3.3V, unless otherwise noted. VOUT (2V/div) VOUT (2V/div) IL (1A/div) IL (1A/div) VSW (5V/div) VSW (5V/div) Time (100s/div) Time (100s/div) Figure 12. Short Circuit Protection (IOUT=1A) Jun. 2014 Figure 13. Short Circuit Recovery (IOUT=1A) Rev. 2. 4 BCD Semiconductor Manufacturing Limited 8 PART OBSOLETE - USE AP3211 and AP5100 Preliminary Datasheet 1.4MHz, 1.5A ASYNCHRONOUS DC-DC BUCK CONVERTER AP3211H VIN=12V 5 IN C1 10F 25V 4 ON OFF 1 BS AP3211H OBSOLETE - PART DISCONTINUED Typical Application L1 4.7H 6 SW D1 R1 49.9k VOUT=3.3V (1.5A) C2 22F 6.3V 3 FB EN CB 10nF GND R2 16.2k 2 Figure 14. Typical Application Circuit of AP3211H Jun. 2014 Rev. 2. 4 BCD Semiconductor Manufacturing Limited 9 PART OBSOLETE - USE AP3211 and AP5100 Preliminary Datasheet 1.4MHz, 1.5A ASYNCHRONOUS DC-DC BUCK CONVERTER AP3211H SOT-23-6 Unit: mm(inch) 0 2.820(0.111) 8 3.100(0.122) 0.300(0.012) 0.500(0.020) 0.200(0.008) 5 4 2 3 0.300(0.012) 0.600(0.024) 1.500(0.059) 1.700(0.067) 6 2.650(0.104) 3.000(0.118) OBSOLETE - PART DISCONTINUED Mechanical Dimensions Pin 1 Mark 1 0.700(0.028)REF 0.950(0.037)TYP 0.000(0.000) 0.150(0.006) 1.800(0.071) 2.000(0.079) 0.100(0.004) 0.200(0.008) 0.900(0.035) 1.450(0.057) MAX 1.300(0.051) Jun. 2014 Rev. 2. 4 BCD Semiconductor Manufacturing Limited 10 PART OBSOLETE - USE AP3211 and AP5100 Preliminary Datasheet 1.4MHz, 1.5A ASYNCHRONOUS DC-DC BUCK CONVERTER AP3211H OBSOLETE - PART DISCONTINUED Mounting Pad Layout SOT-23-6 E E Y G Z X Dimensions Value Jun. 2014 Z (mm)/(inch) 3.600/0.142 G (mm)/(inch) 1.600/0.063 X (mm)/(inch) 0.700/0.028 Rev. 2. 4 Y (mm)/(inch) 1.000/0.039 E (mm)/(inch) 0.950/0.037 BCD Semiconductor Manufacturing Limited 11 BCD Semiconductor Manufacturing Limited http://www.bcdsemi.com IMPORTANT NOTICE BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifications herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any IMPORTANT NOTICE IMPORTANT NOTICE particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or BCD Semiconductor BCD Semiconductor Manufacturing Manufacturing Limited Limited reserves reserves the the right right to to make make changes changes without without further further notice notice to to any any products products or or specifispecifiother rights nor the rights of others. cations herein. cations herein. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not assume assume any any responsibility responsibility for for use use of of any any its its products products for for any any particular particular purpose, purpose, nor nor does does BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited assume assume any any liability liability arising arising out out of of the the application application or or use use MAIN SITE ofHeadquarters any its any its products products or or circuits. circuits. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited does not does not convey convey any any license license under under its its patent patent rights rights or or -of - Wafer Limited Fab BCD (Shanghai) Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. other other rights Micro-electronics rights nor the nor the rights rightsLimited of others. of others. No. 1600, Zi Xing Road, Shanghai ZiZhu Science-based Industrial Park, 200241, P. R.C. Tel: +86-021-2416-2266, Fax: +86-021-2416-2277 MAIN SITE SITE MAIN REGIONAL SALES Manufacturing OFFICE - Headquarters BCD Semiconductor Limited 800 Yishan Road, Shanghai 200233, China Tel: +021-6485-1491, Fax: +86-021-5450-0008 - Wafer FabSemiconductor Manufacturing Limited BCD BCD Semiconductor Manufacturing Limited Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. Shenzhen Office Taiwan Office (Taipei) - Wafer Fab - IC Design Group No. 1600, Zi Xing Road, Shanghai ZiZhu Science-basedCo., Industrial Park, 200241, China Yi Shan Road, Shanghai 200233, China Shanghai SIM-BCD Semiconductor Manufacturing Ltd., Shenzhen Office BCD800 Semiconductor (Taiwan) Company Limited Shanghai SIM-BCD Semiconductor Manufacturing Limited Advanced Analog Circuits (Shanghai) Corporation Tel: Fax: +86-21-24162277 Tel: +86-21-6485 1491, 0008Dist., Unit A 1203,Skyworth Bldg., Gaoxin 3F, No.17, Lane 171, Sec. 2, Jiu-Zong Rd.,Shanghai Nei-Hu Taipei(114), Taiwan, R.O.C 800,+86-21-24162266, YiRoom Shan Road, Shanghai 200233, ChinaAve.1.S., Nanshan District 8F, Zone B, 900, YiFax: Shan+86-21-5450 Road, 200233, China Shenzhen 518057,1491, ChinaFax: +86-21-5450 0008 Tel: +886-2-2656 2808 Tel: +86-21-6485 Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 REGIONAL SALES OFFICE Tel: +86-0755-8660-4900, Fax: +86-0755-8660-4958 Fax: +886-2-2656-2806/26562950 Shenzhen OfficeSALES OFFICE Taiwan Office USA Office REGIONAL Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd., Shenzhen Office Semiconductor BCD Office Semiconductor Corp. Taiwan Office (Hsinchu) USABCD Office Korea Office USA Shenzhen Office Taiwan Office (Taiwan) Company Limited Unit ASemiconductor Room 1203, Skyworth Gaoxin Ave.1.S., Nanshan Shenzhen, 4F,Semiconductor 298-1, Guang Road,(Taiwan) Nei-Hu District, Taipei, 30920Semiconductor Huntwood Ave.Corporation Hayward, BCD (Taiwan)Bldg., Company Limited BCD Corp. BCD Semiconductor Limited Korea office. Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.District, Shenzhen Office BCDRui Semiconductor Company Limited BCD China Taiwan CADigital-Empire 94544, USA Ave. 8F, No.176,Analog Sec. 2, Gong-Dao 5th Road, Corporation East District Shenzhen Office 48460 Kato CARoad, 94538, USA District, Room 101-1112, II, 486 Sin-dong, Advanced Circuits (Shanghai) 4F,Road, 298-1,Fremont, Rui Guang Nei-Hu Taipei, 30920 Huntwood Hayward, Tel: +86-755-8826 7951 +886-2-2656 2808 Tel :94544, +1-510-324-2988 HsinChu 300, Taiwan, R.O.C 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Tel:Tel: +1-510-668-1950 Yeongtong-Gu, Suwon-city, Gyeonggi-do, Korea Room E, City 5F, Noble Center, No.1006, Taiwan CA U.S.A Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 Fax: +1-510-324-2788 Tel: +886-3-5160181, Fax: +886-3-5160181 Fax: +1-510-668-1990 Tel: +82-31-695-8430 Tel: +86-755-8826 7951 Tel: +886-2-2656 2808 Tel : +1-510-324-2988 Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 Fax: +1-510-324-2788 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Diodes Incorporated: AP3211HKTR-G1