CC8 Vishay Electro-Films CHIP RESISTORS Thin Film 0202 Size Resistor on Alumina FEATURES * Wire bondable * Chip size: 0.020 inches square Product may not be to scale * Resistance range: 20 to 20 k * Alumina substrate * Low stray capacitance: < 0.2 pF The CC8 series resistor chips offer a combination of low shunt capacitance, small size and excellent stability. The CC8s are manufactured using Vishay Electro-Films (EFI) sophisticated thin film equipment and manufacturing technology. The CC8s are 100 % electrically tested and visually inspected to MIL-STD-883. * Resistor material: Nichrome with passivation coat * Tolerances to 0.5 % APPLICATIONS Vishay EFI CC8 chip resistors provide excellent high-frequency response and are ideally suited for prototyping. Typical application areas are: * Amplifiers * Couplers * Oscillators * Filters * Attenuators Recommended for hermetic environment where die is not exposed to moisture. TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES Tightest Standard Tolerance Available 0.5 % 20 PROCESS CODE 25 ppm/C CLASS H* CLASS K* 50 ppm/C 303 308 100 ppm/C 302 307 301 306 50 5.1 k 20 k * MIL-PRF-38534 inspection criteria STANDARD ELECTRICAL SPECIFICATIONS PARAMETER Noise, MIL-STD-202, Method 308 - 20 dB typ. Moisture Resistance, MIL-STD-202 Method 106 (Passivated Film) 0.5 % max. R/R Stability, 1000 h, + 125 C, 25 mW 0.2 % max. R/R Operating Temperature Range - 55 C to + 125 C Thermal Shock, MIL-STD-202, Method 107, Test Condition F 0.25 % max. R/R High Temperature Exposure, + 150 C, 1000 h 0.5 % max. R/R Dielectric Voltage Breakdown 400 V 1012 min. Insulation Resistance Operating Voltage 100 V max. DC Power Rating at + 70 C (Derated to Zero at + 150 C) 5 x Rated Power Short-Time Overload, + 25 C, 5 s www.vishay.com 34 For technical questions, contact: efi@vishay.com 35 mW max. 0.25 % max. R/R Document Number: 61007 Revision: 11-Mar-08 CC8 Thin Film 0202 Size Resistor on Alumina Vishay Electro-Films 0.020 CHIP RESISTORS DIMENSIONS in inches 0.020 0.020 0.020 0.004 0.004 0.015 0.008 TYPICAL RANGE 20 - 100 TYPICAL RANGE 110 - 20 k SCHEMATIC MECHANICAL SPECIFICATIONS in inches PARAMETER Chip Size 0.020 x 0.020 0.003 (0.5 x 0.5 0.08 mm) Chip Thickness 0.010 0.002 (0.25 0.05 mm) Chip Substrate Material 99.6 % alumina, 2 - 4 microinch finish Resistor Material Nichrome Bonding Pad Size 0.004 x 0.008 (0.10 x 0.20 mm) minimum Number of Pads 2 Pad Material 25 k minimum gold standard Passivation Thermalset plastic Backing Options: None Gold back for solder die attach Contact Applications Engineer ORDERING INFORMATION Example: 100 % visual, 50 , 10 %, 50 ppm/C TCR, gold pads, class H visual inspection W INSPECTION/ PACKAGING W = 100 % visually inspected parts in matrix tray per MIL-STD-883 X = Sample, commercial visually inspected parts loaded in matrix trays (4 % AQL) Document Number: 61007 Revision: 11-Mar-08 CC8 PRODUCT FAMILY 302 PROCESS CODE See Process Code table 5000 RESISTANCE VALUE Use first 4 significant digits of resistance For technical questions, contact: efi@vishay.com B MULTIPLIER CODE B = 0.01 A = 0.1 0=1 1 = 10 K TOLERANCE CODE D = 0.5 % F = 1.0 % G = 2.0 % H = 2.5 % J = 5.0 % K = 10 % *Coating standard www.vishay.com 35 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1