www.vishay.com For technical questions, contact: efi@vishay.com Document Number: 61007
34 Revision: 11-Mar-08
CC8
Vishay Electro-Films
Thin Film 0202 Size Resistor on Alumina
CHIP
RESISTORS
The CC8 series resistor chips offer a combination of low
shunt capacitance, small size and excellent stability.
The CC8s are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology. The CC8s are 100 % electrically tested and
visually inspected to MIL-STD-883.
FEATURES
•Wire bondable
•Chip size: 0.020 inches square
•Resistance range: 20 Ω to 20 kΩ
•Alumina substrate
•Low stray capacitance: < 0.2 pF
•Resistor material: Nichrome with passivation coat
•Tolerances to 0.5 %
APPLICATIONS
Vishay EFI CC8 chip resistors provide excellent high-frequency response and are ideally suited for prototyping.
Typical application areas are:
•Amplifiers
•Oscillators
•Attenuators
•Couplers
•Filters
Recommended for hermetic environment where die is not exposed to moisture.
Product may not
be to scale
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES
PROCESS CODE
CLASS H* CLASS K*
303 308
302 307
301 306
* MIL-PRF-38534 inspection criteria
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308 - 20 dB typ.
Moisture Resistance, MIL-STD-202
Method 106 (Passivated Film) ± 0.5 % max. ΔR/R
Stability, 1000 h, + 125 °C, 25 mW ± 0.2 % max. ΔR/R
Operating Temperature Range - 55 °C to + 125 °C
Thermal Shock, MIL-STD-202,
Method 107, Test Condition F ± 0.25 % max. ΔR/R
High Temperature Exposure, + 150 °C, 1000 h ± 0.5 % max. ΔR/R
Dielectric Voltage Breakdown 400 V
Insulation Resistance 1012 min.
Operating Voltage 100 V max.
DC Power Rating at + 70 °C (Derated to Zero at + 150 °C) 35 mW max.
5 x Rated Power Short-Time Overload, + 25 °C, 5 s ± 0.25 % max. ΔR/R
20 Ω50 Ω5.1 kΩ20 kΩ
0.5 %
Tightest Standard Tolerance Available
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
Document Number: 61007 For technical questions, contact: efi@vishay.com www.vishay.com
Revision: 11-Mar-08 35
CC8
Thin Film 0202 Size Resistor on Alumina Vishay Electro-Films
CHIP
RESISTORS
DIMENSIONS in inches
SCHEMATIC
Options: Gold back for solder die attach
Contact Applications Engineer
0.015
0.020
0.020
0.004
TYPICAL RANGE
20 Ω - 100 Ω
0.008
0.020
0.004
0.020
TYPICAL RANGE
110 Ω - 20 kΩ
MECHANICAL SPECIFICATIONS in inches
PARAMETER
Chip Size 0.020 x 0.020 ± 0.003 (0.5 x 0.5 ± 0.08 mm)
Chip Thickness 0.010 ± 0.002 (0.25 ± 0.05 mm)
Chip Substrate Material 99.6 % alumina, 2 - 4 microinch finish
Resistor Material Nichrome
Bonding Pad Size 0.004 x 0.008 (0.10 x 0.20 mm) minimum
Number of Pads 2
Pad Material 25 kΩ minimum gold standard
Passivation Thermalset plastic
Backing None
ORDERING INFORMATION
Example: 100 % visual, 50 Ω, ± 10 %, ± 50 ppm/°C TCR, gold pads, class H visual inspection
W
INSPECTION/
PA CK A G I NG
W = 100 % visually inspected
parts in matrix tray per
MIL-STD-883
X = Sample, commercial
visually inspected parts
loaded in matrix trays (4 % AQL)
CC8
PRODUCT
FAMILY
302
PROCESS
CODE
See Process Code
table
5000
RESISTANCE
VALUE
Use first 4
significant digits of
resistance
B
MULTIPLIER
CODE
B = 0.01
A = 0.1
0 = 1
1 = 10
K
TOLERANCE
CODE
D = 0.5 %
F = 1.0 %
G = 2.0 %
H = 2.5 %
J = 5.0 %
K = 10 %
*Coating standard
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
