Type 381LR 105 C Highest Ripple, Snap-In Aluminum Ultra-High Ripple Capabilities Compared to standard 105 C snap-ins like the Type 381L/LX Type 381LR can handle an extra 25% ripple current or more. This remarkable capability stems from advances in electrolyte that give extremely low ESR values.In high ripple current applications like motor drives you can save by using fewer capacitors. Highlights - The right choice for motor drive bus capacitors - The right choice for UPS bus capacitors - Compare to Type 381L - Up to 2 times the ripple current Specifications Temperature Range -40 C to + 105 C 315 Vdc -25 C to + 105 C 350 Vdc Rated Voltage Range 200 Vdc to 450 Vdc Capacitance Range 56 F to 2,200 F Capacitance Tolerance 20% Leakage Current 3 CV A, 4 mA max, 5 minutes Ripple Current Multipliers Ambient Temperature 45 C 60 C 70 C 85 C 105 C 2.35 2.20 2.00 1.70 1.00 Frequency 10 50 Hz 60 Hz 120 Hz 500 kHz 1 kHz kHz & Up 0.75 0.80 1.00 1.20 1.25 1.40 Low Temperature Characteristics Impedance ratio: Z-20C Z+25C 3 (200-450Vdc) Endurance Life Test 3000 h at full load at 105 C Capacitance 20% ESR 200% of limit DCL 100% of limit Shelf Life Test 1000 h at 105 C Capacitance 20% ESR 200% of limit DCL 100% of limit Vibration 10 to 55 Hz, 0.06" and 10 g max, 2 h each plane RoHS Compliant CDM Cornell Dubilier * 140 Technology Place * Liberty, SC 29657 * Phone: (864)843-2277 * Fax: (864)843-3800 Type 381LR 105 C Highest Ripple, Snap-In Aluminum Ultra-High Ripple Capabilities Part Numbering System 381LR 271 M 200 Type Cap Tolerance Voltage 381LR 271 = 270 F M = 20% 160 = 160 Vdc 222 = 2200 F H01 2 +D Case Insulating Blank = no end disk if <250 V Code Sleeve D = end disk, any voltage 2 = PVC 450 = 450 Vdc Outline Drawing Top of Capacitor Body 2.0max. 6.3 1 4.0 +0.2 0.8 -0.1 1.5 0.2 6.3 mm pin length +0.2 0.8 -0.1 L 2 max. 4.0 2.0max. 3.5 1.5 0.2 Top of Capacitor Body Dimensions shown are in mm 4.0 mm pin length option (add "A" to end of part#) Note that for 200 volts and under the insulating end disc is optional - If one is needed add a (+D) to the end of the part numbering system. Insulated Case Dimensions Case Code DIAMETER D mm inches LENGTH L mm inches Typical Weight Case (grams) Code DIAMETER D mm inches LENGTH L mm Typical Weight inches (grams) H01 22 0.87 25 0.98 16 K01 30 1.18 25 0.98 30 H02 22 0.87 30 1.18 19 K02 30 1.18 30 1.18 35 H03 22 0.87 35 1.38 22 K03 30 1.18 35 1.38 40 H04 22 0.87 40 1.57 24 K04 30 1.18 40 1.57 44 H45 22 0.87 45 1.77 28 K45 30 1.18 45 1.77 49 H05 22 0.87 50 1.97 31 K05 30 1.18 50 1.97 53 J01 25 0.98 25 0.98 20 A01 35 1.38 25 0.98 42 J02 25 0.98 30 1.18 24 A02 35 1.38 30 1.18 48 J03 25 0.98 35 1.38 27 A03 35 1.38 35 1.38 54 J04 25 0.98 40 1.57 31 A04 35 1.38 40 1.57 60 J45 25 0.98 45 1.77 35 A45 35 1.38 45 1.77 67 J05 25 0.98 50 1.97 38 A05 35 1.38 50 1.97 74 A55 35 1.38 55 2.17 80 CDM Cornell Dubilier * 140 Technology Place * Liberty, SC 29657 * Phone: (864)843-2277 * Fax: (864)843-3800 Type 381LR 105 C Highest Ripple, Snap-In Aluminum Ultra-High Ripple Capabilities Ratings Cap. Catalog (F) Part Number ESR Max Ripple Amps Nominal ESR Max Ripple Amps Nominal @ 25 C @ 105 C Size @ 25 C @ 105 C Size 120 Hz 20 kHz 120 Hz 20 kHz () () D x L Cap. Catalog (A) (A) (mm) (F) Part Number 200 Vdc (250 Vdc Surge) 120 Hz 20 kHz 120 Hz 20 kHz () () D x L (A) (A) (mm) 250 Vdc (300 Vdc Surge) 270 381LR271M200H012 0.553 0.249 1.42 2.03 22 X 25 680 381LR681M250K032 0.219 0.099 2.42 3.45 30 X 35 330 381LR331M200H022 0.452 0.203 1.56 2.23 22 X 30 680 381LR681M250A022 0.219 0.099 2.42 3.45 35 X 30 390 381LR391M200H022 0.383 0.172 1.71 2.44 22 X 30 820 381LR821M250K042 0.182 0.082 2.63 3.76 30 X 40 390 381LR391M200J012 0.383 0.172 1.71 2.44 25 X 25 820 381LR821M250A032 0.182 0.082 2.63 3.76 35 X 35 470 381LR471M200H032 0.317 0.143 1.85 2.64 22 X 35 1000 381LR102M250K052 0.149 0.067 2.84 4.06 30 X 50 470 381LR471M200J022 0.317 0.143 1.85 2.64 25 X 30 1000 381LR102M250A042 0.149 0.067 2.84 4.06 35 X 40 560 381LR561M200H042 0.266 0.120 2.14 3.05 22 X 40 1200 381LR122M250A452 0.124 0.062 3.13 4.47 35 X 45 560 381LR561M200J022 0.266 0.120 2.14 3.05 25 X 30 1500 381LR152M250A052 0.099 0.050 3.56 5.06 35 X 50 560 381LR561M200K012 0.266 0.120 2.14 3.05 30 X 25 680 381LR681M200H452 0.219 0.099 2.42 3.45 22 X 45 82 381LR820M400H012 1.617 0.728 0.8 1.14 22 X 25 680 381LR681M200J032 0.219 0.099 2.42 3.45 25 X 35 100 381LR101M400H022 1.326 0.597 0.91 1.3 22 X 30 400 Vdc (450 Vdc Surge) 680 381LR681M200K022 0.219 0.099 2.42 3.45 30 X 30 100 381LR101M400J012 1.960 0.960 0.91 1.3 25 X 25 820 381LR821M200H052 0.182 0.082 2.63 3.76 22 X 50 120 381LR121M400H032 1.105 0.497 1.02 1.46 22 X 35 820 381LR821M200J042 0.182 0.082 2.63 3.76 25 X 40 120 381LR121M400J022 1.105 0.497 1.02 1.46 25 X 30 820 381LR821M200K022 0.182 0.082 2.63 3.76 30 X 30 150 381LR151M400H042 1.105 0.387 1.07 1.53 22 X 40 820 381LR821M200A012 0.182 0.082 2.63 3.76 35 X 25 150 381LR151M400J022 1.105 0.387 1.07 1.53 25 X 30 1000 381LR102M200J452 0.149 0.067 2.84 4.06 25 X 45 150 381LR151M400K012 1.105 0.387 1.07 1.53 30 X 25 1000 381LR102M200K032 0.149 0.067 2.84 4.06 30 X 35 180 381LR181M400H452 0.737 0.322 1.12 1.6 22 X 45 1000 381LR102M200A022 0.149 0.067 2.84 4.06 35 X 30 180 381LR181M400J032 0.737 0.322 1.12 1.6 25 X 35 1200 381LR122M200K042 0.124 0.062 3.13 4.47 30 X 40 180 381LR181M400K022 0.737 0.322 1.12 1.6 30 X 30 1200 381LR122M200A032 0.124 0.062 3.13 4.47 35 X 35 220 381LR221M400H052 0.603 0.271 1.42 2.03 22 X 50 1500 381LR152M200K052 0.099 0.050 3.56 5.06 30 X 50 220 381LR221M400J042 0.603 0.271 1.42 2.03 25 X 40 1500 381LR152M200A042 0.099 0.050 3.56 5.06 35 X 40 220 381LR221M400K022 0.603 0.271 1.42 2.03 30 X 30 1800 381LR182M200A452 0.083 0.041 3.84 5.48 35 X 45 220 381LR221M400A012 0.603 0.271 1.42 2.03 35 X 25 2200 381LR222M200A052 0.066 0.040 4.12 5.89 35 X 50 270 381LR271M400J452 0.491 0.221 1.56 2.23 25 X 45 270 381LR271M400K032 0.491 0.221 1.56 2.23 30 X 35 250 Vdc (300 Vdc Surge) 220 381LR221M250H022 0.678 0.305 1.28 1.83 22 X 30 270 381LR271M400A022 0.491 0.221 1.56 2.23 35 X 30 270 381LR271M250H022 0.553 0.249 1.42 2.03 22 X 30 330 381LR331M400K042 0.402 0.181 1.71 2.44 30 X 40 270 381LR271M250J012 0.553 0.249 1.42 2.03 25 X 25 330 381LR331M400A022 0.402 0.181 1.71 2.44 35 X 30 330 381LR331M250H032 0.452 0.203 1.64 2.34 22 X 35 390 381LR391M400K452 0.34 0.153 1.85 2.64 30 X 45 330 381LR331M250J022 0.452 0.203 1.64 2.34 25 X 30 390 381LR391M400A032 0.34 0.153 1.85 2.64 35 X 35 390 381LR391M250H042 0.383 0.172 1.72 2.45 22 X 40 470 381LR471M400A042 0.282 0.127 2.01 2.87 35 X 40 390 381LR391M250J022 0.383 0.172 1.72 2.45 25 X 30 560 381LR561M400A452 0.237 0.107 2.35 3.36 35 X 45 390 381LR391M250K012 0.383 0.172 1.72 2.45 30 X 25 470 381LR471M250H452 0.317 0.143 1.85 2.64 22 X 45 68 381LR680M420H012 1.95 0.878 0.76 1.08 22 X 25 470 381LR471M250J032 0.317 0.143 1.85 2.64 25 X 35 82 381LR820M420H022 1.617 0.728 0.8 1.14 22 X 30 470 381LR471M250K022 0.317 0.143 1.85 2.64 30 X 30 82 381LR820M420J012 1.617 0.728 0.8 1.14 25 X 25 560 381LR561M250J042 0.266 0.120 2.14 3.05 25 X 40 100 38L1R101M420H022 1.326 0.597 0.91 1.3 22 X 30 560 381LR561M250K022 0.266 0.120 2.14 3.05 30 X 30 100 381LR101M420J012 1.326 0.597 0.91 1.3 25 X 25 560 381LR561M250A012 0.266 0.120 2.14 3.05 35 X 25 120 381LR121M420H032 1.105 0.497 1.02 1.46 22 X 35 680 381LR681M250J452 0.219 0.099 2.42 3.45 25 X 45 120 381LR121M420J022 1.105 0.497 1.02 1.46 25 X 30 420 Vdc (470 Vdc Surge) CDM Cornell Dubilier * 140 Technology Place * Liberty, SC 29657 * Phone: (864)843-2277 * Fax: (864)843-3800 Type 381LR 105 C Highest Ripple, Snap-In Aluminum Ultra-High Ripple Capabilities Cap. Catalog (F) Part Number ESR Max Ripple Amps Nominal ESR Max Ripple Amps Nominal @ 25 C @ 105 C Size @ 25 C @ 105 C Size 120 Hz 20 kHz 120 Hz 20 kHz () () D x L Cap. Catalog (A) (A) (mm) (F) Part Number 420 Vdc (470 Vdc Surge) () () D x L (A) (A) (mm) 450 Vdc (500 Vdc Surge) 150 381LR151M420K012 0.884 0.398 1.07 1.53 30 X 25 100 381LR101M450H032 1.326 0.597 0.91 1.3 22 X 35 180 381LR181M420H452 0.737 0.332 1.12 1.6 22 X 45 100 381LR101M450J022 1.326 0.597 0.91 1.3 25 X 30 180 381LR181M420J042 0.737 0.332 1.12 1.6 25 X 40 120 381LR121M450H042 1.105 0.497 1.02 1.46 22 X 40 180 381LR181M420K022 0.737 0.332 1.12 1.6 30 X 30 120 381LR121M450J032 1.105 0.497 1.02 1.46 25 X 35 180 381LR181M420A012 0.737 0.332 1.12 1.6 35 X 25 120 381LR121M450K012 1.105 0.497 1.02 1.46 30 X 25 220 381LR221M420J452 0.603 0.271 1.42 2.03 25 X 45 150 381LR151M450H452 0.884 0.396 1.07 1.53 22 X 45 220 381LR221M420K032 0.603 0.271 1.42 2.03 30 X 35 150 381LR151M450J042 0.884 0.396 1.07 1.53 25 X 40 220 381LR221M420A022 0.603 0.271 1.42 2.03 35 X 30 150 381LR151M450K022 0.884 0.396 1.07 1.53 30 X 30 270 381LR271M420J052 0.491 0.221 1.68 2.4 25 X 50 150 381LR151M450A012 0.884 0.396 1.07 1.53 35 X 25 270 381LR271M420K042 0.491 0.221 1.68 2.4 30 X 40 180 381LR181M450H052 0.737 0.332 1.12 1.6 22 X 50 270 381LR271M420A022 0.491 0.221 1.68 2.4 35 X 30 180 381LR181M450J042 0.737 0.332 1.12 1.6 25 X 40 330 381LR331M420K452 0.402 0.181 1.78 2.54 30 X 45 180 381LR181M450K022 0.737 0.332 1.12 1.6 30 X 30 330 381LR331M420A032 0.402 0.181 1.78 2.54 35 X 35 180 381LR181M450A012 0.737 0.332 1.12 1.6 35 X 25 390 381LR391M420K052 0.34 0.153 1.91 2.73 30 X 50 220 381LR221M450J452 0.603 0.271 1.42 2.03 25 X 45 390 381LR391M420A042 0.34 0.153 1.91 2.73 35 X 40 220 381LR221M450K032 0.603 0.271 1.42 2.03 30 X 35 470 381LR471M420A452 0.282 0.127 2.23 3.18 35 X 45 220 381LR221M450A022 0.603 0.271 1.42 2.03 35 X 30 270 381LR271M450K042 0.491 0.221 1.72 2.45 30 X 40 450 Vdc (500 Vdc Surge) 56 381LR560M450H012 2.368 1.066 0.67 0.95 22 X 25 270 381LR271M450A032 0.491 0.221 1.72 2.45 35 X 35 68 381LR680M450H022 1.95 0.878 0.76 1.08 22 X 30 330 381LR331M450K052 0.402 0.181 1.85 2.64 30 X 50 68 381LR680M450J012 1.95 0.878 0.76 1.08 25 X 25 330 381LR331M450A042 0.402 0.181 1.85 2.64 35 X 40 82 381LR820M450H022 1.617 0.728 0.8 1.14 22 X 30 390 381LR391M450A042 0.34 0.153 1.97 2.82 35 X 40 82 381LR820M450J012 1.617 0.728 0.8 1.14 25 X 25 470 381LR471M450A052 0.282 0.127 2.47 3.53 35 X 50 Typical Performance Curves Capacitance and DF (%) 35 30 5 DF 3 25 20 DCL 2 15 1 10 C 0 DCL (A) 4 5 0 -1 500 1000 1500 7 6 50 3 40 DCL 2 30 1 20 C 0 10 -1 0 500 Type 381LR Operating Life in Kilohours vs Ripple Current 1000 60 4 0 Hours @ Rated Max Temp, Voltage, Ripple 1000 1500 Hours @ Rated Max Temp, Voltage, Ripple 45 C 55 C 65 C 100 75 C 85 C 95 C 105 C 10 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 80 70 DF 5 2000 Expected Operating Life, kh 0 Life Test 105 C, Full Load, 330 F, 400 Vdc Capacitance, DF, Leakage Current 1.2 1.3 1.4 1.5 Rated Ripple-Current Multiple CDM Cornell Dubilier * 140 Technology Place * Liberty, SC 29657 * Phone: (864)843-2277 * Fax: (864)843-3800 2000 DCL (A) Life Test 105 C, Full Load, 220 F, 400 Vdc Capacitance, DF, Leakage Current 6 Capacitance and DF (%) 120 Hz 20 kHz 120 Hz 20 kHz Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the "Information") in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements ("Cornell Dubilier") has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter - and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.