99484304 - CROUZET - Datasheet.Live

Type 381LR 105 °C Highest Ripple, Snap-In Aluminum

Ultra-High Ripple Capabilities

Compared to standard 105 °C snap-ins like the Type 381L/LX

Type 381LR can handle an extra 25% ripple current or more.

This remarkable capability stems from advances in electrolyte

that give extremely low ESR values.In high ripple current

applications like motor drives you can save by using fewer

capacitors.

Highlights

- The right choice for motor drive bus capacitors

- The right choice for UPS bus capacitors

- Compare to Type 381L

- Up to 2 times the ripple current

Specications

Temperature Range –40 °C to + 105 °C ≤ 315 Vdc

–25 °C to + 105 °C ≥ 350 Vdc

Rated Voltage Range 200 Vdc to 450 Vdc

Capacitance Range 56 µF to 2,200 µF

Capacitance Tolerance ± 20%

Leakage Current ≤3 √CV µA, 4 mA max, 5 minutes

Ripple Current Multipliers Ambient Temperature

Low Temperature Characteristics Impedance ratio: Z–20⁰C ∕ Z+25⁰C

≤ 3 (200–450Vdc)

Endurance Life Test 3000 h at full load at 105 °C

∆ Capacitance ±20%

ESR 200% of limit

DCL 100% of limit

Shelf Life Test 1000 h at 105 °C

∆ Capacitance ±20%

ESR 200% of limit

DCL 100% of limit

Vibration 10 to 55 Hz, 0.06” and 10 g max, 2 h each plane

RoHS Compliant

Frequency

45 ºC 60 ºC 70 ºC 85 ºC 105 ºC

2.35 2.20 2.00 1.70 1.00

50 Hz 60 Hz 120 Hz 500 kHz 1 kHz

kHz &

0.75 0.80 1.00 1.20 1.25 1.40

CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

381LR 271 M 200 H01 2 +D

Case Insulating Blank = no end disk if <250 V

Type Cap Tolerance Voltage Code Sleeve D = end disk, any voltage

381LR 271 = 270 µF M = ±20% 160 = 160 Vdc 2 = PVC

222 = 2200 µF 450 = 450 Vdc

Outline Drawing

Insulated Case Dimensions

DIAMETER

LENGTH Typical DIAMETER

LENGTH Typical

Case L Weight Case L Weight

Code mm inches mm inches (grams) Code mm inches mm inches (grams)

H01 22 0.87 25 0.98 16 K01 30 1.18 25 0.98 30

H02 22 0.87 30 1.18 19 K02 30 1.18 30 1.18 35

H03 22 0.87 35 1.38 22 K03 30 1.18 35 1.38 40

H04 22 0.87 40 1.57 24 K04 30 1.18 40 1.57 44

H45 22 0.87 45 1.77 28 K45 30 1.18 45 1.77 49

H05 22 0.87 50 1.97 31 K05 30 1.18 50 1.97 53

J01 25 0.98 25 0.98 20 A01 35 1.38 25 0.98 42

J02 25 0.98 30 1.18 24 A02 35 1.38 30 1.18 48

J03 25 0.98 35 1.38 27 A03 35 1.38 35 1.38 54

J04 25 0.98 40 1.57 31 A04 35 1.38 40 1.57 60

J45 25 0.98 45 1.77 35 A45 35 1.38 45 1.77 67

J05 25 0.98 50 1.97 38 A05 35 1.38 50 1.97 74

A55 35 1.38 55 2.17 80

CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Type 381LR 105 °C Highest Ripple, Snap-In Aluminum

Ultra-High Ripple Capabilities

Part Numbering System

4.0

1.5 0.2

2.0max.

4.0 mm pin length

option (add “A” to end

of part#)

Top of

Capacitor

Body

0.8 +0.2

-0.1

3.5

4.0

6.3 1

1.5 0.2

2.0max.

6.3 mm pin length

Top of

Capacitor

Body

0.8 +0.2

-0.1

Note that for 200 volts and under the insulating end disc is optional - If one is needed add a (+D) to the end of the part numbering system.

L ± 2 max.

Dimensions shown are in mm

ESR Max Ripple Amps Nominal ESR Max Ripple Amps Nominal

@ 25º C @ 105 ºC Size @ 25º C @ 105 ºC Size

Cap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz D x L Cap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz D x L

(µF) Part Number (Ω) (Ω) (A) (A) (mm) (µF) Part Number (Ω) (Ω) (A) (A) (mm)

200 Vdc (250 Vdc Surge) 250 Vdc (300 Vdc Surge)

270 381LR271M200H012 0.553 0.249 1.42 2.03 22 X 25 680 381LR681M250K032 0.219 0.099 2.42 3.45 30 X 35

330 381LR331M200H022 0.452 0.203 1.56 2.23 22 X 30 680 381LR681M250A022 0.219 0.099 2.42 3.45 35 X 30

390 381LR391M200H022 0.383 0.172 1.71 2.44 22 X 30 820 381LR821M250K042 0.182 0.082 2.63 3.76 30 X 40

390 381LR391M200J012 0.383 0.172 1.71 2.44 25 X 25 820 381LR821M250A032 0.182 0.082 2.63 3.76 35 X 35

470 381LR471M200H032 0.317 0.143 1.85 2.64 22 X 35 1000 381LR102M250K052 0.149 0.067 2.84 4.06 30 X 50

470 381LR471M200J022 0.317 0.143 1.85 2.64 25 X 30 1000 381LR102M250A042 0.149 0.067 2.84 4.06 35 X 40

560 381LR561M200H042 0.266 0.120 2.14 3.05 22 X 40 1200 381LR122M250A452 0.124 0.062 3.13 4.47 35 X 45

560 381LR561M200J022 0.266 0.120 2.14 3.05 25 X 30 1500 381LR152M250A052 0.099 0.050 3.56 5.06 35 X 50

560 381LR561M200K012 0.266 0.120 2.14 3.05 30 X 25 400 Vdc (450 Vdc Surge)

680 381LR681M200H452 0.219 0.099 2.42 3.45 22 X 45 82 381LR820M400H012 1.617 0.728 0.8 1.14 22 X 25

680 381LR681M200J032 0.219 0.099 2.42 3.45 25 X 35 100 381LR101M400H022 1.326 0.597 0.91 1.3 22 X 30

680 381LR681M200K022 0.219 0.099 2.42 3.45 30 X 30 100 381LR101M400J012 1.960 0.960 0.91 1.3 25 X 25

820 381LR821M200H052 0.182 0.082 2.63 3.76 22 X 50 120 381LR121M400H032 1.105 0.497 1.02 1.46 22 X 35

820 381LR821M200J042 0.182 0.082 2.63 3.76 25 X 40 120 381LR121M400J022 1.105 0.497 1.02 1.46 25 X 30

820 381LR821M200K022 0.182 0.082 2.63 3.76 30 X 30 150 381LR151M400H042 1.105 0.387 1.07 1.53 22 X 40

820 381LR821M200A012 0.182 0.082 2.63 3.76 35 X 25 150 381LR151M400J022 1.105 0.387 1.07 1.53 25 X 30

1000 381LR102M200J452 0.149 0.067 2.84 4.06 25 X 45 150 381LR151M400K012 1.105 0.387 1.07 1.53 30 X 25

1000 381LR102M200K032 0.149 0.067 2.84 4.06 30 X 35 180 381LR181M400H452 0.737 0.322 1.12 1.6 22 X 45

1000 381LR102M200A022 0.149 0.067 2.84 4.06 35 X 30 180 381LR181M400J032 0.737 0.322 1.12 1.6 25 X 35

1200 381LR122M200K042 0.124 0.062 3.13 4.47 30 X 40 180 381LR181M400K022 0.737 0.322 1.12 1.6 30 X 30

1200 381LR122M200A032 0.124 0.062 3.13 4.47 35 X 35 220 381LR221M400H052 0.603 0.271 1.42 2.03 22 X 50

1500 381LR152M200K052 0.099 0.050 3.56 5.06 30 X 50 220 381LR221M400J042 0.603 0.271 1.42 2.03 25 X 40

1500 381LR152M200A042 0.099 0.050 3.56 5.06 35 X 40 220 381LR221M400K022 0.603 0.271 1.42 2.03 30 X 30

1800 381LR182M200A452 0.083 0.041 3.84 5.48 35 X 45 220 381LR221M400A012 0.603 0.271 1.42 2.03 35 X 25

2200 381LR222M200A052 0.066 0.040 4.12 5.89 35 X 50 270 381LR271M400J452 0.491 0.221 1.56 2.23 25 X 45

250 Vdc (300 Vdc Surge) 270 381LR271M400K032 0.491 0.221 1.56 2.23 30 X 35

220 381LR221M250H022 0.678 0.305 1.28 1.83 22 X 30 270 381LR271M400A022 0.491 0.221 1.56 2.23 35 X 30

270 381LR271M250H022 0.553 0.249 1.42 2.03 22 X 30 330 381LR331M400K042 0.402 0.181 1.71 2.44 30 X 40

270 381LR271M250J012 0.553 0.249 1.42 2.03 25 X 25 330 381LR331M400A022 0.402 0.181 1.71 2.44 35 X 30

330 381LR331M250H032 0.452 0.203 1.64 2.34 22 X 35 390 381LR391M400K452 0.34 0.153 1.85 2.64 30 X 45

330 381LR331M250J022 0.452 0.203 1.64 2.34 25 X 30 390 381LR391M400A032 0.34 0.153 1.85 2.64 35 X 35

390 381LR391M250H042 0.383 0.172 1.72 2.45 22 X 40 470 381LR471M400A042 0.282 0.127 2.01 2.87 35 X 40

390 381LR391M250J022 0.383 0.172 1.72 2.45 25 X 30 560 381LR561M400A452 0.237 0.107 2.35 3.36 35 X 45

390 381LR391M250K012 0.383 0.172 1.72 2.45 30 X 25 420 Vdc (470 Vdc Surge)

470 381LR471M250H452 0.317 0.143 1.85 2.64 22 X 45 68 381LR680M420H012 1.95 0.878 0.76 1.08 22 X 25

470 381LR471M250J032 0.317 0.143 1.85 2.64 25 X 35 82 381LR820M420H022 1.617 0.728 0.8 1.14 22 X 30

470 381LR471M250K022 0.317 0.143 1.85 2.64 30 X 30 82 381LR820M420J012 1.617 0.728 0.8 1.14 25 X 25

560 381LR561M250J042 0.266 0.120 2.14 3.05 25 X 40 100 38L1R101M420H022 1.326 0.597 0.91 1.3 22 X 30

560 381LR561M250K022 0.266 0.120 2.14 3.05 30 X 30 100 381LR101M420J012 1.326 0.597 0.91 1.3 25 X 25

560 381LR561M250A012 0.266 0.120 2.14 3.05 35 X 25 120 381LR121M420H032 1.105 0.497 1.02 1.46 22 X 35

680 381LR681M250J452 0.219 0.099 2.42 3.45 25 X 45 120 381LR121M420J022 1.105 0.497 1.02 1.46 25 X 30

Ratings

CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Type 381LR 105 °C Highest Ripple, Snap-In Aluminum

Ultra-High Ripple Capabilities

-1

0500 1000 1500 2000

DCL (µA)

ΔCapacitance and DF (%)

Hours @ Rated Max Temp, Voltage, Ripple

Life Test 105 ⁰C, Full Load, 220 µF, 400 Vdc

Capacitance, DF, Leakage Current

DCL

ESR Max Ripple Amps Nominal ESR Max Ripple Amps Nominal

@ 25º C @ 105 ºC Size @ 25º C @ 105 ºC Size

Cap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz D x L Cap. Catalog 120 Hz 20 kHz 120 Hz 20 kHz D x L

(µF) Part Number (Ω) (Ω) (A) (A) (mm) (µF) Part Number (Ω) (Ω) (A) (A) (mm)

420 Vdc (470 Vdc Surge) 450 Vdc (500 Vdc Surge)

150 381LR151M420K012 0.884 0.398 1.07 1.53 30 X 25 100 381LR101M450H032 1.326 0.597 0.91 1.3 22 X 35

180 381LR181M420H452 0.737 0.332 1.12 1.6 22 X 45 100 381LR101M450J022 1.326 0.597 0.91 1.3 25 X 30

180 381LR181M420J042 0.737 0.332 1.12 1.6 25 X 40 120 381LR121M450H042 1.105 0.497 1.02 1.46 22 X 40

180 381LR181M420K022 0.737 0.332 1.12 1.6 30 X 30 120 381LR121M450J032 1.105 0.497 1.02 1.46 25 X 35

180 381LR181M420A012 0.737 0.332 1.12 1.6 35 X 25 120 381LR121M450K012 1.105 0.497 1.02 1.46 30 X 25

220 381LR221M420J452 0.603 0.271 1.42 2.03 25 X 45 150 381LR151M450H452 0.884 0.396 1.07 1.53 22 X 45

220 381LR221M420K032 0.603 0.271 1.42 2.03 30 X 35 150 381LR151M450J042 0.884 0.396 1.07 1.53 25 X 40

220 381LR221M420A022 0.603 0.271 1.42 2.03 35 X 30 150 381LR151M450K022 0.884 0.396 1.07 1.53 30 X 30

270 381LR271M420J052 0.491 0.221 1.68 2.4 25 X 50 150 381LR151M450A012 0.884 0.396 1.07 1.53 35 X 25

270 381LR271M420K042 0.491 0.221 1.68 2.4 30 X 40 180 381LR181M450H052 0.737 0.332 1.12 1.6 22 X 50

270 381LR271M420A022 0.491 0.221 1.68 2.4 35 X 30 180 381LR181M450J042 0.737 0.332 1.12 1.6 25 X 40

330 381LR331M420K452 0.402 0.181 1.78 2.54 30 X 45 180 381LR181M450K022 0.737 0.332 1.12 1.6 30 X 30

330 381LR331M420A032 0.402 0.181 1.78 2.54 35 X 35 180 381LR181M450A012 0.737 0.332 1.12 1.6 35 X 25

390 381LR391M420K052 0.34 0.153 1.91 2.73 30 X 50 220 381LR221M450J452 0.603 0.271 1.42 2.03 25 X 45

390 381LR391M420A042 0.34 0.153 1.91 2.73 35 X 40 220 381LR221M450K032 0.603 0.271 1.42 2.03 30 X 35

470 381LR471M420A452 0.282 0.127 2.23 3.18 35 X 45 220 381LR221M450A022 0.603 0.271 1.42 2.03 35 X 30

450 Vdc (500 Vdc Surge) 270 381LR271M450K042 0.491 0.221 1.72 2.45 30 X 40

56 381LR560M450H012 2.368 1.066 0.67 0.95 22 X 25 270 381LR271M450A032 0.491 0.221 1.72 2.45 35 X 35

68 381LR680M450H022 1.95 0.878 0.76 1.08 22 X 30 330 381LR331M450K052 0.402 0.181 1.85 2.64 30 X 50

68 381LR680M450J012 1.95 0.878 0.76 1.08 25 X 25 330 381LR331M450A042 0.402 0.181 1.85 2.64 35 X 40

82 381LR820M450H022 1.617 0.728 0.8 1.14 22 X 30 390 381LR391M450A042 0.34 0.153 1.97 2.82 35 X 40

82 381LR820M450J012 1.617 0.728 0.8 1.14 25 X 25 470 381LR471M450A052 0.282 0.127 2.47 3.53 35 X 50

Typical Performance Curves

CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Type 381LR 105 °C Highest Ripple, Snap-In Aluminum

Ultra-High Ripple Capabilities

-1

0500 1000 1500 2000

DCL (µA)

ΔCapacitance and DF (%)

Hours @ Rated Max Temp, Voltage, Ripple

Life Test 105 ⁰C, Full Load, 330 µF, 400 Vdc

Capacitance, DF, Leakage Current

DCL

100

1000

00.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 11.1 1.2 1.3 1.4 1.5

Expected Operating Life, kh

Rated Ripple-Current Multiple

Type 381LR Operating Life in Kilohours vs Ripple Current

45 ºC

55 ºC

65 ºC

ºC

85 ºC

95 ºC

105 ºC

Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and

data (collectively, the “Information”) in this datasheet or other publication are subject to change. The

customer is responsible for checking, conrming and verifying the extent to which the Information con-

tained in this datasheet or other publication is applicable to an order at the time the order is placed. All

Information given herein is believed to be accurate and reliable, but it is presented without any guaran-

tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability

for certain applications are based on the knowledge that the Cornell Dubilier company providing such

statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards

as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-

tion regarding any such matter – and Cornell Dubilier specically and expressly disclaims any guarantee,

warranty or representation concerning the suitability for a specic customer application, use, storage,

transportation, or operating environment. The Information is intended for use only by customers who

have the requisite experience and capability to determine the correct products for their application. Any

technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference

to the use of any Cornell Dubilier products is given gratis (unless otherwise specied by Cornell Dubilier),

and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although

Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design

and manufacturing of its products, in light of the current state of the art, isolated component failures may

still occur. Accordingly, customer applications which require a high degree of reliability or safety should

employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies

or other appropriate protective measures) in order to ensure that the failure of an electrical component

does not result in a risk of personal injury or property damage. Although all product-related warnings,

cautions and notes must be observed, the customer should not assume that all safety measures are indi-

cated in such warnings, cautions and notes, or that other safety measures may not be required.