VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or
reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its
documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or
implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or
failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in an y medical
appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This
document provides preliminary information that may be subject to change without notice. No freedom to use patents or other
intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2
Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640
Copyright © Bridgetek Limited 1
FTDI Chip
VM800P Datasheet
Embedded Video
Engine
Plus Module
General Purpose Multi Media Controller
The VM800P is a development module for FTDI’s FT800, which is used to develop and demonstrate the
functionality of the FT800 Embedded Video Engine, EVE.
The VM800P is a stand-alone display system which
has a flash based microcontroller on board, thus
providing a fully integrated display system ready
to go.
The VM800P supports many I/O daughter cards or
shields for expanding external interfacing and
control. These shields use 1 or 2 Micro-MaTch
miniature connectors to interface to the VM800P
main module. Users will be able to purchase
shields from FTDI Chip in the coming months, or
alternatively can build their own shield for specific
applications.
The VM800P series of modules support 3 different
LCD panel size options and are designed for
industrial or commercial environments with
precision fitted bezels in either black (-BK) or pearl
(-PL).
VM800P35A-xx is the 3.5” LCD
VM800P43A-xx is the 4.3” LCD
VM800P50A-xx is the 5.0” LCD
The VM800P utilises the FTDI FT800 Embedded Video
Engine, EVE. Graphic, audio and touch features of the
FT800 chip can be accessed with the VM800P. For a full
list of the FT800’s features please see the FT800
datasheet.
The VM800P module has the following features:
FT800 for graphics, audio and touch processing
ATMEGA328P system microcontroller operating at
5V/16MHz supporting Arduino libraries
Touch screen LCD panel
Backlight LED driver
Audio power amplifier and micro speaker
FT232R USB serial port for firmware upgrade
Micro-SD socket for application storage, including
4GByte SD Card pre-loaded with sample
applications
Battery backed Real Time Clock
2x Micro-MaTch miniature connectors for daughter
card expansion
5V power supply from micro-USB or battery
connector
Precision fitted bezel in black(-BK) or pearl (-PL)
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 2
1 Ordering Information
Part No.
Description
VM800P35A-BK
FT800 Display System, ATMEG328P @ 5V/16MHz, Micro-SD socket,
3.5” 320x240 resolution TFT LCD with resistive touch panel, black
case
VM800P43A-BK
FT800 Display System, ATMEG328P @ 5V/16MHz, Micro-SD socket,
4.3” 480x272 resolution TFT LCD with resistive touch panel, black
case
VM800P50A-BK
FT800 Display System, ATMEG328P @ 5V/16MHz, Micro-SD socket,
5.0” 480x272 resolution TFT LCD with resistive touch panel, black
case
VM800P35A-PL
FT800 Display System, ATMEG328P @ 5V/16MHz, Micro-SD socket,
3.5” 320x240 resolution TFT LCD with resistive touch panel, pearl
case
VM800P43A-PL
FT800 Display System, ATMEG328P @ 5V/16MHz, Micro-SD socket,
4.3” 480x272 resolution TFT LCD with resistive touch panel, pearl
case
VM800P50A-PL
FT800 Display System, ATMEG328P @ 5V/16MHz, Micro-SD socket,
5.0” 480x272 resolution TFT LCD with resistive touch panel, pearl
case
ACCESSORIES
VA800A-PROG
Accessory - PLUS Production Programmer for ATMEGA328P inc Tag
Connect TC2030-IDC-FP cable
VA-PSU-UK1
Accessory - UK Model 5V/1A USB Power Supply
( Mfr # JX-B0520C-1-B )
VA-PSU-US1
Accessory - US Model 5V/1A USB Power Supply
( Mfr # JX-B0520B-1-B )
VA-PSU-EU1
Accessory - EU Model 5V/1A USB Power Supply
( Mfr # JX-B0520A-1-B )
VA-FC-1M-BKW
Accessory - Flat USB A to Micro B Cable 1M- Black and White
VA-FC-1M-BLW
Accessory - Flat USB A to Micro B Cable 1M- Blue and White
VA-FC-STYLUS1
Accessory - Resistive Touch Screen Pen Stylus
VI800A-TTLU
VI800A UART TTL module, plug in board to VM800P Plus module
VI800A-232U
VI800A RS232 module, plug in board to VM800P Plus module
VI800A-N485U
VI800A RS485 module, plug in board for the VM800P Plus module
VI800A-RELAY
VI800A Opto-isolated Inputs and RELAY output module, plug in
board to VM800P Plus module
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 3
Part No.
Description
VI800A-ETH
VI800A Ethernet module, plug in board for the VM800P Plus module
VI800A-PoE
VI800A POE Ethernet module, plug in board for the VM800P Plus
module
Table 1.1 VM800P & Accessory Ordering Information
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 4
Table of Contents
1 Ordering Information ................................................ 2
2 Hardware Description ................................................ 6
2.1 Physical Description ............................................................ 7
2.1.1 Dimensions ........................................................................................ 7
2.1.2 Connectors and Jumpers ...................................................................... 8
2.1.3 CN1 - 2-pin power connector ................................................................ 8
2.1.4 CN2 – Micro USB Receptacle ................................................................ 8
2.1.5 J2 – Audio Selection ............................................................................ 9
2.1.6 J5 – Expansion Connector for I/O Daughter Card .................................... 9
2.1.7 J6 - Expansion Connector for Comm Daughter Card .............................. 10
2.1.8 JP1 – Audio Amplifier Power Selection ................................................. 10
2.1.9 SW1 – Power Source Selection ........................................................... 11
2.1.10 JP4 – USB Power Selection ................................................................. 11
2.2 Board Schematics .............................................................. 12
3 Hardware Setup Guide ............................................. 15
3.1 Power Configuration .......................................................... 15
4 Arduino® Setup ........................................................ 16
4.1 Hardware Setup ................................................................ 16
4.2 Software Setup .................................................................. 16
5 Assembling the Bezel and Panel Mounting ............... 19
5.1 Dimensions for 3.5” Bezel ................................................. 20
5.2 Dimensions for 4.3” Bezel ................................................. 21
5.3 Dimensions for 5.0” Bezel ................................................. 22
6 Specifications .......................................................... 23
6.1 LCD Optical Specifications for 3.5” Panel .......................... 23
6.2 LCD Optical Specifications for 4.3” Panel .......................... 24
6.3 LCD Optical Specifications for 5.0” Panel .......................... 25
7 Contact Information ................................................ 26
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 5
Appendix A – References ............................................. 27
Document References ............................................................... 27
Acronyms and Abbreviations ..................................................... 27
Appendix B – List of Tables & Figures .......................... 28
List of Tables ............................................................................. 28
List of Figures ........................................................................... 28
Appendix C – Revision History ..................................... 29
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 6
2 Hardware Description
Figure 2.1 VM800P35A Module Profile 3.5" Display Version
Figure 2.2 VM800P43A Module Profile 4.3" Display Version
Figure 2.3 VM800P50A Module Profile 5.0" Display Version
NOTE: The above modules are also available with pearl colored bezels.
The VM800P module is available for different LCD sizes: 3.5”, 4.3” or 5”.
Each VM800P module is assembled with following parts:
VM800PxxA PCB board
LCD panel with touch screen
Bezel
The main functions of the VM800PxxA PCB board are as follows:
FT800 EVE for graphic, audio and touch control
ATMEGA328P microcontroller operating at 5V and 16MHz, controlling the FT800 and other
peripheral interfaces
3 stage audio filter
8Ω micro speaker to work with on-board audio amplifier
Jumper selection allowing audio line out option
LCD backlight LED driver
Real Time Clock(RTC) with button battery
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 7
4
7.8
46.2
59.6
72.5
76.3
USB interface for power supply and firmware programming
2-pin JST connector for alternative power source
3.3V regulator: takes 5V input and outputs 3.3V for on-board circuits
2x Micro-MaTch miniature connectors for various daughter card expansion
SD Card Socket (4GByte card supplied with module)
2.1 Physical Description
The VM800P module dimensions are illustrated in Figure 2.4 and Figure 2.5.
2.1.1 Dimensions
Figure 2.4 VM800P35A Dimensions (Top view)
5
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 8
23.2
102.8
61.6
106.5
68.5
64.5
4
5
Figure 2.5 VM800P43A/VM800P50A Dimensions (Top view)
±0.50mm Tolerance
All dimensions are in mm
2.1.2 Connectors and Jumpers
Connectors and jumpers are described in the following sections.
2.1.3 CN1 - 2-pin power connector
Pin No.
Name
Type
Description
1
VCC
P
5V DC power supply
2
GND
P
Ground
Table 2.1 CN1 - Power Pin-out
2.1.4 CN2 – Micro USB Receptacle
Pin No.
Name
Type
Description
1
VBUS
P
5V power supply
2
D-
IO
USB D- line
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 9
3
D+
IO
USB D+ line
4
NC
NA
No connection
5
GND
P
Ground
Table 2.2 CN2 – Micro USB Pin-out
2.1.5 J2 – Audio Selection
Select between audio line-out or connection to the power amplifier.
Jumper position
Description
Short pin 1-2
Audio amp enabled (default)
Short pin 2-3
Audio amp mute, Audio lineout on pin 1
Table 2.3 J2 – Audio Options
2.1.6 J5 – Expansion Connector for I/O Daughter Card
This 16-pin Micro-MaTch miniature connector provides ATmega328P SPI/I2C/IO control to the
daughter card. 5V and 3.3V power supplies are also available.
Pin No.
Name
Type
Description
1
SCK
O
SPI Clock output
2
MOSI
O
SPI Master Out Slave in
3
MISO
I
SPI Master In Slave out
4
IO7
O
SPI slave select
5
INT0
I
Interrupt input from DC
6
IO6
O
Active LOW reset output to DC
7
AD4
IO
I2C SDA data input/output
8
AD5
O
I2C SCL clock output
9
3V3
P
3.3V power supply to DC
10
5V
P
5V power supply to DC
11
GND
P
Ground
12
RST#
O
System reset output
13
IO5
IO
GPIO
14
AD0
IO
GPIO
15
AD7
AI
ADC input
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 10
Pin No.
Name
Type
Description
16
AD6
AI
ADC input
Table 2.4 J5 - I/O Expansion Connector Pin-out
2.1.7 J6 - Expansion Connector for Comm Daughter Card
This 16-pin Micro MaTch Miniature connector provides ATmega328P SPI/I2C/IO control to the
daughter card. 5V and 3.3V power supplies are also available.
Pin No.
Name
Type
Description
1
SCK
O
SPI Clock output
2
MOSI
O
SPI Master Out Slave in
3
MISO
I
SPI Master In Slave out
4
SS
O
SPI salve select
5
INT0
I
Interrupt input from DC
6
IO6
O
Active LOW reset output to DC
7
AD4
IO
I2C SDA data input/output
8
AD5
O
I2C SCL clock output
9
3V3
P
3.3V power supply to DC
10
5V
P
5V power supply to DC
11
GND
P
Ground
12
RST#
O
System reset output
13
AD1
IO
GPIO
14
IO4
IO
GPIO
15
AD3
AI
GPIO
16
AD2
AI
GPIO
Table 2.5 J5 - Communication Expansion Connector Pin-out
2.1.8 JP1 – Audio Amplifier Power Selection
This jumper provides the option to select the power supply voltage for the on-board power
amplifier.
Jumper position
Description
Short pin 1-2
3.3V selected (default)
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 11
Short pin 2-3
5V selected
Table 2.6 JP1 - Audio Amplifier Power Pin Options
NOTE: This needs to be configured before audio can be heard. Default is 3.3V. Select 5V to
increase the maximum volume for the speaker.
2.1.9 SW1 – Power Source Selection
Jumper position
Description
Short pin 1-2
Board power from CN1
Short pin 2-3
Board power from CN2 (default)
Table 2.7 SW1 - Power Source Selection
2.1.10 JP4 – USB Power Selection
Jumper position
Description
Open
Enable USB power to application circuits when FT232R is
enumerated (Default). USB power will be turned off during
USB suspend
Short
USB power always enabled
Table 2.8 JP4 - USB Power Selection
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 12
2.2 Board Schematics
Figure 2.6 VM800P35A FT800 and LCD Interface
Figure 2.7 VM800P43A/VM800P50A FT800 and LCD Interface
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 13
Figure 2.8 VM800PxxA MCU, USB and I/O
Figure 2.9 VM800PxxA SD-Card, Flash and RTC
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 14
Figure 2.10 VM800PxxA Audio
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 15
3 Hardware Setup Guide
3.1 Power Configuration
There are 2 methods of powering the VM800P board.
1) USB Power(5V) - Connect USB power through micro-USB cable to CN2
2) DC IN(5V) - Connect 5V to CN1
The following table summarizes how to power the VM800P board using the various methods.
Power Method
CN1
CN2
SW1
USB Power
N/C
5V
Short pin 2-3 (default)
DC IN(5V)
5V
5V
Short pin 1-2
Table 3.1 Board Power Configuration
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 16
4 Arduino® Setup
FTDI provides sample source code, sample application notes and a ready to run demo based on
the Arduino® platform. Detailed information can be found at:
http://www.ftdichip.com/Support/Documents/AppNotes/AN_318_Arduino_Library_for_FT800_Seri
es.pdf
http://www.ftdichip.com/Support/Documents/AppNotes/AN_275_FT800_Example_with_Arduino.pd
f
http://www.ftdichip.com/Support/Documents/AppNotes/AN_246%20VM800CB_SampleApp_Arduin
o_Introduction.pdf
4.1 Hardware Setup
Connect a USB cable (suggest FTDI accessory VA-FC-1M-BKW or VA-FC-1M-BLW) from the
VM800P USB port CN2 to the PC USB host port or self-powered hub port.
The PC will supply power to the VM800P after the FTDI FT232R driver is properly loaded
and the USB host completes USB device configuration.
4.2 Software Setup
The Arduino code can be downloaded from the Arduino IDE to the ATMEGA328P through the USB
connector CN2 connected to the PC. The USB connector CN2 is also used to display debug output
from the ATMEGA328P to the PC terminal application.
Default sample code is downloaded to the ATMEGA328P during the VM800P module
manufacturing. When the VM800P is connected to the PC through the USB connector CN2, the
VM800P is powered up and the sample code is functional with the demo applications.
Download the Arduino IDE from http://arduino.cc/en/main/software.
Install the Arduino IDE
Open the Arduino IDE
Open the FT800 sample project to be downloaded to the VM800P
(Examples are available from:
http://www.ftdichip.com/Support/SoftwareExamples/FT800_Projects.htm
Or you may have developed your own code)
Select the Tools->Board-> Arduino Pro or Pro Mini(5V, 16MHz) w/ATmega328 as shown in
Fig 4.1.
Select the Tools->Serial Port->COMxx corresponding to the VM800P as shown in Fig 4.2.
Click the Upload button as shown in Fig 4.3. This will upload the FT800 sample to the
VM800P.
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 17
Figure 4.1 Select Board
Figure 4.2 Select Serial Port
(NOTE: Your device may not be COM22 as shown. Select the
COM port you have installed)
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 18
Figure 4.3 Click Upload Button
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 19
5 Assembling the Bezel and Panel Mounting
Figure 5.1 VM800P Panel Mount (Front view)
Figure 5.2 VM800P Panel Mount (Rear view)
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 20
5.1 Dimensions for 3.5” Bezel
Figure 5.3 VM800P 3.5” panel mount dimensions
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 21
5.2 Dimensions for 4.3” Bezel
Figure 5.4 VM800P 4.3” panel mount dimensions
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 22
5.3 Dimensions for 5.0” Bezel
Figure 5.5 VM800P 5.0” panel mount dimensions
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 23
6 Specifications
6.1 LCD Optical Specifications for 3.5” Panel
Figure 6.1 3.5” TFT Optical Specifications
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 24
6.2 LCD Optical Specifications for 4.3” Panel
Figure 6.2 4.3” TFT Optical Specifications
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 25
6.3 LCD Optical Specifications for 5.0” Panel
Figure 6.3 5.0" TFT Optical Specifications
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 26
7 Contact Information
Head Quarters – Singapore
Branch Office – Taipei, Taiwan
Bridgetek Pte Ltd
178 Paya Lebar Road, #07-03
Singapore 409030
Tel: +65 6547 4827
Fax: +65 6841 6071
Bridgetek Pte Ltd, Taiwan Branch
2 Floor, No. 516, Sec. 1, Nei Hu Road, Nei Hu District
Taipei 114
Taiwan, R.O.C.
Tel: +886 (2) 8797 5691
Fax: +886 (2) 8751 9737
E-mail (Sales)
sales.apac@brtchip.com
E-mail (Sales)
sales.apac@brtchip.com
E-mail (Support)
support.apac@brtchip.com
E-mail (Support)
support.apac@brtchip.com
Branch Office - Glasgow, United Kingdom
Branch Office – Vietnam
Bridgetek Pte. Ltd.
Unit 1, 2 Seaward Place, Centurion Business Park
Glasgow G41 1HH
United Kingdom
Tel: +44 (0) 141 429 2777
Fax: +44 (0) 141 429 2758
Bridgetek VietNam Company Limited
Lutaco Tower Building, 5th Floor, 173A Nguyen Van
Troi,
Ward 11, Phu Nhuan District,
Ho Chi Minh City, Vietnam
Tel : 08 38453222
Fax : 08 38455222
E-mail (Sales)
sales.emea@brtichip.com
E-mail (Sales)
sales.apac@brtchip.com
E-mail (Support)
support.emea@brtchip.com
E-mail (Support)
support.apac@brtchip.com
Web Site
http://brtchip.com/
Distributor and Sales Representatives
Please visit the Sales Network page of the Bridgetek Web site for the contact details of our distributor(s) and
sales representative(s) in your country.
System and equipment manufacturers and designers are responsible to ensure that their systems, and any Future Technology
Devices International Ltd (FTDI) devices incorporated in their systems, meet all applicable safety, regulatory and system-level
performance requirements. All application-related information in this document (including application descriptions, suggested
FTDI devices and other materials) is provided for reference only. While FTDI has taken care to assure it is accurate, this
information is subject to customer confirmation, and FTDI disclaims all liability for system designs and for any applications
assistance provided by FTDI. Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the
user agrees to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting from
such use. This document is subject to change without notice. No freedom to use patents or other intellectual property rights is
implied by the publication of this document. Neither the whole nor any part of the information contained in, or the product
described in this document, may be adapted or reproduced in any material or electronic form without the prior written consent
of the copyright holder. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park,
Glasgow G41 1HH, United Kingdom. Scotland Registered Company Number: SC136640
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 27
Appendix A – References
Document References
For module documentations, please refer to URL below:
http://www.ftdichip.com/Products/modules/VM800P.html
FT800 datasheet: DS_FT800_Embedded_Video_Engine
FT800 software programming guide: FT800_Programmer_Guide
AN_318: Arduino Library for FT800 Series
AN_275 : FT800 Example with Android
AN_246: VM800CB SampleApp_Arduino Introduction
Acronyms and Abbreviations
Terms
Description
IO
Input Output
I2C
Inter Integrated Circuit
LCD
Liquid Crystal Display
RTC
Real Time Clock
SD CARD
Secure Digital Card
SPI
Serial Peripheral Interface
UART
Universal Asynchronous Receiver Transmitter
USB
Universal Serial Bus
USB-IF
USB Implementers Forum
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 28
Appendix B – List of Tables & Figures
List of Tables
Table 1.1 VM800P & Accessory Ordering Information ............................................................... 3
Table 2.1 CN1 - Power Pin-out .............................................................................................. 8
Table 2.2 CN2 – Micro USB Pin-out ........................................................................................ 9
Table 2.3 J2 – Audio Options ................................................................................................ 9
Table 2.4 J5 - I/O Expansion Connector Pin-out .................................................................... 10
Table 2.5 J5 - Communication Expansion Connector Pin-out ................................................... 10
Table 2.6 JP1 - Audio Amplifier Power Pin Options ................................................................. 11
Table 2.7 SW1 - Power Source Selection .............................................................................. 11
Table 2.8 JP4 - USB Power Selection ................................................................................... 11
Table 3.1 Board Power Configuration ................................................................................... 15
List of Figures
Figure 2.1 VM800P35A Module Profile 3.5" Display Version ....................................................... 6
Figure 2.2 VM800P43A Module Profile 4.3" Display Version ....................................................... 6
Figure 2.3 VM800P50A Module Profile 5.0" Display Version ....................................................... 6
Figure 2.4 VM800P35A Dimensions (Top view) ....................................................................... 7
Figure 2.5 VM800P43A/VM800P50A Dimensions (Top view)...................................................... 8
Figure 2.6 VM800P35A FT800 and LCD Interface ................................................................... 12
Figure 2.7 VM800P43A/VM800P50A FT800 and LCD Interface ................................................. 12
Figure 2.8 VM800PxxA MCU, USB and I/O ............................................................................ 13
Figure 2.9 VM800PxxA SD-Card, Flash and RTC .................................................................... 13
Figure 2.10 VM800PxxA Audio ............................................................................................ 14
Figure 4.1 Select Board ..................................................................................................... 17
Figure 4.2 Select Serial Port ............................................................................................... 17
Figure 4.3 Click Upload Button ............................................................................................ 18
Figure 5.1 VM800P Panel Mount (Front view) ........................................................................ 19
Figure 5.2 VM800P Panel Mount (Rear view) ......................................................................... 19
Figure 5.3 VM800P 3.5” panel mount dimensions .................................................................. 20
Figure 5.4 VM800P 4.3” panel mount dimensions .................................................................. 21
Figure 5.5 VM800P 5.0” panel mount dimensions .................................................................. 22
Figure 6.1 3.5” TFT Optical Specifications ............................................................................. 23
Figure 6.2 4.3” TFT Optical Specifications ............................................................................. 24
Figure 6.3 5.0" TFT Optical Specifications ............................................................................. 25
VM800P Embedded Video Engine Plus Module Datasheet
Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008
Copyright © Bridgetek Limited 29
Appendix C – Revision History
Document Title: VM800P Embedded Video Engine Plus Module Datasheet
Document Reference No.: BRT_000021
Clearance No.: BRT#008
Product Page: http://brtchip.com/product
Document Feedback: Send Feedback
Revision
Changes
Date
1.0
Initial Release
2014-04-24
1.1
Updated Release
2014-05-27
1.2
Updated the optical characteristics for the 4.3” and 5”
displays
2014-06-12
1.3
Update Add-on boards order information
Updated contact details
Dual branding to reflect the migration of the product
to the Bridgetek name – logo changed, copyright
changed, contact information changed
2016-09-13
