74AHC594
Document number: DS35484 Rev. 3 - 2
1 of 11
www.diodes.com June 2013
© Diodes Incorporated
74AHC594
8-BIT SHIFT REGISTER WITH 8-BIT OUTPUT REGISTER
Description
The 74AHC594 is an advanced high speed CMOS device.
An eight bit shift register accepts data from the serial input (DS) on
each positive transition of the shift register clock (SHCP). When
asserted low the shift regisister reset function (SHR) sets all shift
register values to zero and is independent of all clocks. Also when
asserted low the storage register reset function (STR) sets all shift
register values to zero and is independent of all clocks.
Data from the input serial shift register is placed in the output register
with a rising pulse on the storages resister clock (STCP). The
storage resister includes output Q7S which is used for cascading
information between devices. As the information moves into the
storage register, it is asserted on the push-pull outputs Q0-Q7.
All registers capture data on rising edge and change output on the
falling edge. If both clocks are connected together, the input shift
register is always one clock cycle ahead of the output register.
Features
Wide Supply Voltage Range from 2.0V to 5.5V
Sinks or sources 8mA at VCC = 4.5V
CMOS low power consumption
Schmitt Trigger Action at All Inputs
Inputs accept up to 5.5V
ESD Protection Tested per JESD 22
Exceeds 200-V Machine Model (A115-A)
Exceeds 2000-V Human Body Model (A114-A)
Exceeds 1000-V Charged Device Model (C101C)
Latch-Up Exceeds 250mA per JESD 78, Class II
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Pin Assignments
Applications
General Purpose Logic
Serial to Parallel Data conversion
Capture and hold data for extended periods of time.
Allow simple serial bit streams from a microcontroller to control as
many peripheral lines as needed
Wide array of products such as:
Computer Peripherals
Appliances
Industrial Control
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Click here for ordering information, located at the end of datasheet
74AHC594
Document number: DS35484 Rev. 3 - 2
2 of 11
www.diodes.com June 2013
© Diodes Incorporated
74AHC594
Pin Descriptions
Pin Number Pin Name Functions
1 Q1 Parallel Data Output 1
2 Q2 Parallel Data Output 2
3 Q3 Parallel Data Output 3
4 Q4 Parallel Data Output 4
5 Q5 Parallel Data Output 5
6 Q6 Parallel Data Output 6
7 Q7 Parallel Data Output 7
8 GND Ground
9 Q7S Serial Data Output
10 SHR Shift Register Reset active low
11 SHCP Shift Register Clock Input
12 STCP Storage Register Clock Input
13 STR Storage Register Reset active low
14 DS Serial Data input
15 Q0 Parallel Data Output 0
16 Vcc Supply Voltage
Functional Diagram
Logic Diagram
R
DQ
CP
FF0
DQ
CP
LATCH
STAGE 0
DQ
STAGES 1 TO 6
R
DQ
CP
FF7
DQ
CP
LATCH
STAGE 7
DS
SHCP
SHR
STCP
STR
Q0 Q1 Q2 Q3 Q5
Q4 Q6 Q7
RR
74AHC594
Document number: DS35484 Rev. 3 - 2
3 of 11
www.diodes.com June 2013
© Diodes Incorporated
74AHC594
Functional Description and Timing Diagram
Control Input Output Function
SHR STR SHCP STCP DS Q7S Qn
L X X X X L NC Clear Shift Register
X L X X X NC L Clear Storage Register
H X
L H or L Q6S NC Loads DS into shift register stage 0. All QS shifted
H H X X NC Qs
Contents of shift register moved to starge register all QS -> QN
H H H or L Q6S QnS Shift Register one pulse count ahead of storage register.
H=HIGH voltage state
L=LOW voltage state
↑=LOW to HIGH transition
X= don’t care – high or low (not floating)
NC= No change
SHCP
DS
STCP
SHR
STR
Q0
Q1
Q6
Q7
Q7S
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
Symbol Parameter Rating Unit
ESD HBM Human Body Model ESD Protection 2 kV
ESD CDM Charged Device Model ESD Protection 1 kV
ESD MM Machine Model ESD Protection 200 V
VCC Supply Voltage Range -0.5 to +7.0 V
VI Input Voltage Range -0.5 to +7.0 V
Vo Voltage applied to output in high or low state -0.3 to VCC +0.5 V
IIK Input Clamp Current VI< -0.5V -20 mA
IOK Output Clamp Current VO<-0.5V -20 mA
IOK Output Clamp Current VO> VCC +0.5V 20 mA
IO Continuous output current ±25 mA
ICC Continuous current through Vcc 75 mA
IGND Continuous current through GND -75 mA
TJ Operating Junction Temperature -40 to +150 °C
TSTG Storage Temperature -65 to +150 °C
PTOT Total Power Dissipation 500 mW
Notes: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device
operation should be within recommend values.
74AHC594
Document number: DS35484 Rev. 3 - 2
4 of 11
www.diodes.com June 2013
© Diodes Incorporated
74AHC594
Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.)
Symbol Parameter Conditions Min Max Unit
VCC Supply Voltage 2.0 5.5 V
VI Input Voltage 0 5.5 V
VO Output Voltage 0 VCC V
Δt/ΔV Input transition Rise or Fall Rate VCC = 3.0V to 3.6V 100 ns/V
VCC = 4.5V to 5.5V 20
TA Operating Free-Air Temperature -40 +125 °C
Note: 5. Unused inputs should be held at VCC or Ground.
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Symbol Parameter Test Conditions VCC TA = +25°C TA = -40°C to +85°C TA = -40°C to +125°C Unit
Min Typ Max Min Max Min Max
VIH High-Level
Input Voltage
2.0V 1.5 1.5 1.5
V
3.0V 2.1 2.1 2.1
5.5V 3.85 3.85 3.85
VIL Low-Level
Input Voltage
2.0V 0.5 0.5 0.5
V
3.0V 0.9 0.9 0.9
5.5V 1.65 1.65 1.65
VOH High-Level
Output Voltage
IOH = -50μA 2.0V 1.9 2.0 1.9 1.9
V
IOH = -50μA 3.0V 2.9
3.0 2.9 2.9
IOH = -50μA 4.5V 4.4
4.5 4.4 4.4
IOH = -4mA 3.0V 2.58
2.48 2.40
IOH = -8mA 4.5V 3.94
3.80 3.70
VOL Low-Level
Output Voltage
IOL = 50μA 2.0V 0 0.1 0.1 0.1
V
IOL = 50μA 3.0V 0 0.1 0.1 0.1
IOL = 50μA 4.5V 0 0.1 0.1 0.1
IOL = 4mA 3.0V 0.36 0.44 0.55
IOL = 8mA 4.5V 0.36 0.44 0.55
II Input Current VI = GND or 5.5V 5.5V 0.01 ± 0.1 ± 1 ± 2 μA
ICC Supply Current VI = GND or VCC
IO = 0 5.5V 4 40 80 μA
Ci Input
Capacitance
Vi = VCC or GND 5.5V 3.5 10 10 10 pF
74AHC594
Document number: DS35484 Rev. 3 - 2
5 of 11
www.diodes.com June 2013
© Diodes Incorporated
74AHC594
Switching Characteristics
Symbol /
Parameter Pins Test Conditions VCC TA = +25°C -40°C to +85°C -40°C to +125°C Unit
Min Typ Max Min Max Min Max
fMAX
Maximum
Frequency
SHCP or
STCP Figure1
3.0V to 3.6V 80 125 70 65
MHz
4.5V to 5.5V 90 70 80 70
tW
Pulse Width
SHCP and
STCP
HIGH or LOW
Figure1
3.0V to 3.6V 6.0 6.5 7.0
ns
4.5V to 5.5V 5.5 6.0 6.5
SHR and STR
HIGH or LOW Figure1 3.0V to 3.6V 5.0 5.0 5.5
4.5V to 5.5V 5.0 5.2 5.7
tSU
Set-up Time
DS to SHCP Figure1 3.0V to 3.6V 3.5 3.5 3.5 ns
4.5V to 5.5V 3.0 3.0 3.0
SHR to STCP Figure1 3.0V to 3.6V 8.0 9.0 9.5
4.5V to 5.5V 5.0 5.0 5.5
SHCP tp
STCP Figure1 3.0V to 3.6V 8.0 8.5 9.0 ns
4.5V to 5.5V 5.0 5.0 5.5
tH
Hold Time DS to SHCP Figure1 3.0V to 3.6V 1.5 1.5 1.5 ns
4.5V to 5.5V 2.0 2.0 2.0
tREC
Recovery Time
SHR to SHCP Figure1 3.0V to 3.6V 4.2 4.8 5.3 ns
4.5V to 5.5V 2.9 3.3 3.8
SHR to STCP Figure1 3.0V to 3.6V 4.6 5.3 5.8 ns
4.5V to 5.5V 3.2 3.7 4.3
tPLH
LOW to HIGH
Propagation
Delay
SHCP toQ7S
Figure1 CL = 15pF 3.0V to 3.6V 5.2 8.5 2.2 9.7 2.2 10.6
ns
4.5V to 5.5V 3.8 6.3 1.7 7.2 1.7 7.8
Figure1 CL = 50pF 3.0V to 3.6V 7.4 11.5 3.0 13.2 3.0 14.3
4.5V to 5.5V 4.8 8.0 2.4 9.1 2.4 10.0
STCP to Qn
Figure1 CL = 15pF 3.0V to 3.6V 5.1 8.3 2.3 9.5 2.3 10.6
ns
4.5V to 5.5V 3.5 5.7 1.8 6.5 1.8 7.1
Figure1 CL = 50pF 3.0V to 3.6V 7.3 11.9 3.3 13.6 3.3 14.7
4.5V to 5.5V 4.8 7.8 2.6 9.0 2.6 9.8
74AHC594
Document number: DS35484 Rev. 3 - 2
6 of 11
www.diodes.com June 2013
© Diodes Incorporated
74AHC594
Switching Characteristics (cont.)
Symbol /
Parameter Pins Test Conditions VCC TA = +25°C -40°C°C to +85°C -40°C°C to +125°C Unit
Min Typ Max Min Max Min Max
tPHLH
HIGH to LOW
Propagation
Delay
SHCP toQ7S
Figure 1 CL = 15pF 3.0V to 3.6V 5.5 8.9 2.3 10.2 2.3 11.0
ns
4.5V to 5.5V 4.1 6.7 1.9 7.6 1.9 8.2
Figure 1 CL = 50pF 3.0V to 3.6V 7.4 12.1 3.0 13.9 3.0 15.1
4.5V to 5.5V 5.4 8.8 2.5 10.1 2.5 11.0
STCP to Qn
Figure 1 CL = 15pF 3.0V to 3.6V 5.5 9.1 2.4 10.4 2.4 11.3
ns
4.5V to 5.5V 3.7 6.0 1.9 6.9 1.9 7.5
Figure 1 CL = 50pF 3.0V to 3.6V 7.3 12.0 3.2 13.8 3.2 15.0
4.5V to 5.5V 5.2 8.5 2.6 9.7 2.6 10.5
SHR to
Q7S
Figure 1 CL = 15pF 3.0V to 3.6V 5.7 9.5 2.3 10.8 2.3 11.7
ns
4.5V to 5.5V 4.1 6.7 2.0 7.6 2.0 8.2
Figure 1 CL = 50pF 3.0V to 3.6V 7.5 12.2 3.6 14.0 3.6 15.2
4.5V to 5.5V 5.4 8.8 2.8 10.1 2.8 11.0
STR
to Qn
Figure 1 CL = 15pF 3.0V to 3.6V 4.1 7.2 2.2 8.2 2.2 8.9
ns
4.5V to 5.5V 4.1 7.2 2.2 8.2 2.2 8.9
Figure 1 CL = 50pF 3.0V to 3.6V 5.4 9.4 3.0 10.7 3.0 11.6
4.5V to 5.5V 5.4 9.4 3.0 10.7 3.0 11.6
tPHL
Propagation
Delay
SHR to Q7S Figure 1
2.0V 39 150 185 225
ns
4.5V 14 30 37 45
5.0V 11
6.0V 12 26 31 38
STR to Qn Figure 1
2.0V 39 125 155 185
ns
4.5V 14 25 31 37
5.0V 11
6.0V 12 21 26 31
tTHL
Transition
Time
Serial data
output Q7S
Figure 1
2.0V 19 75 95 110
ns
4.5V 7 15 19 22
6.0V 6 13 16 19
Parallel Data
Outputs QN
Figure 1
2.0V 14 60 75 90
ns
4.5V 5 12 15 18
6.0V 4 10 13 15
Operating Characteristics (@TA = +25°C, unless otherwise specified.)
Parameter Test
Conditions VCC = 5V Unit
Typ
Cpd Power dissipation
capacitance f = 1 MHz all outputs switching-no load 51 pF
74AHC594
Document number: DS35484 Rev. 3 - 2
7 of 11
www.diodes.com June 2013
© Diodes Incorporated
74AHC594
Parameter Measurement Information
VCC Inputs VM
VI t
r/tf
4.5V VCC 6ns VCC/2
5.0V VCC 6ns VCC/2
Voltage Waveform
Pulse Duration and Recovery Time
Voltage Waveform
Set-up and Hold Times
Voltage Waveform
Propagation Delay Times
Inverting and Non Inverting Outputs
Notes: A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10MHz.
C. Inputs are measured separately one transition per measurement.
D. t
PLH and tPHL are the same as tPD.
Figure 1 Load Circuit and Voltage Waveforms
74AHC594
Document number: DS35484 Rev. 3 - 2
8 of 11
www.diodes.com June 2013
© Diodes Incorporated
74AHC594
Ordering Information
Part Number Package Code Packaging 7” Tape and Reel (Note 6)
Quantity Part Number Suffix
74AHC594S16-13 S16 SO-16 2500/Tape & Reel -13
74AHC594T16-13 T16 TSSOP-16 2500/Tape & Reel -13
Note: 6. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf
Marking Information
(1) SO-16, TSSOP16
Part Number Package
74AHC594S16 SO-16
74AHC594T16 TSSOP-16
74AHC594
Document number: DS35484 Rev. 3 - 2
9 of 11
www.diodes.com June 2013
© Diodes Incorporated
74AHC594
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
Package Type: SO-16
Package Type: TSSOP-16
SO-16
Dim Min Max
A 1.40 1.75
A1 0.10 0.25
A2 1.30 1.50
B 0.33 0.51
C 0.19 0.25
D 9.80 10.00
E 3.80 4.00
e 1.27 Typ
H 5.80 6.20
L 0.38 1.27
Θ
0 8
All Dimensions in mm
TSSOP-16
Dim Min Max Typ
A - 1.08 -
A1 0.05 0.15 -
A2 0.80 0.93 -
b 0.19 0.30 -
c 0.09 0.20 -
D 4.90 5.10 -
E 6.40 BSC
E1 4.30 4.50 -
e 0.65 BSC
L 0.45 0.75 -
L1 1.00 REF
L2 0.25 BSC
R 0.09 - -
R1 0.09 - -
X - - 1.350
Y - - 1.050
Θ0° 8° -
Θ1 5° 15° -
Θ2 0° - -
All Dimensions in mm
D
EH
L
A2
BeA1
A
C
Detail ‘A’
Detail ‘A’
Gauge Plane
PIN 1
eb
E
E/2
E1
A2
A
D
A1
X
Y
SEE DETAIL 'A'
SEATING PLANE
GAUGE
PLANE
R
L
L1
L2
Ø0.760Depth0.050±0.02
R1
x)
C
DETAIL 'A'
74AHC594
Document number: DS35484 Rev. 3 - 2
10 of 11
www.diodes.com June 2013
© Diodes Incorporated
74AHC594
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
Package Type: SO-16
Package Type: TSSOP-16
Dimensions Value (in mm)
C 1.270
X 0.670
X1 9.560
Y 1.450
Y1 6.400
Dimensions Value (in mm)
C 0.650
X 0.350
X1 4.900
Y 1.400
Y1 6.800
X1
XC
Y
Y1
Pin 1
X1
Y (16x)
Y1
X (16x)
1
C
74AHC594
Document number: DS35484 Rev. 3 - 2
11 of 11
www.diodes.com June 2013
© Diodes Incorporated
74AHC594
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales
channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or
systems.
Copyright © 2013, Diodes Incorporated
www.diodes.com
