page 1/4 Screw and Tab Connectors for Printed Circuit Boards 983- (Z) S /D /W | 10.00 mm (0.394 in) Spacing - 2-26 poles PICTURES 983-ZS Standard Slotted Screws 983-ZD Standard Slotted Screws TECHNICAL INFORMATION Description Barrier strip connector Allows two wires of the same size per contact from either direction Block is offered with or without back barrier (see How to Order (Z) for more detail). Standard product comes with a slotted screw. (For combi/pozidriv screw, please see the options -CSS in the How to Order) Technical Data Center to Center Spacing: 10.000 mm (0.394 in) Nominal Cross Section: 2.5 mm2 (3875 mils2) Wire Stripping Length: 8.500 mm (0.335 in) Recommended Hole Diameter in PC Board: 1.300 mm (0.051 in) Bill of Materials Molding : Polyamide, Self extinguishing UL 94, V-0 Color : Grey Temperature limits : Short Time : 140C (284F) Continuous : 105C (221F) Low Limit : -40C (-40F) Comparative Tracking Index : CTI ? 600 V Oxygen Index Rating : 25 % Terminal Body: Tin plated copper alloy PCB Pin: Tin plated copper alloy 0.8 x 1.0 mm (0.03 x 0.04 in.) Screw and Washer: Zinc plated blue passivated, steel substrate M4 983-S Standard Slotted Screws page 2/4 APROVAL INFORMATION UL File No. E69841 | CSA File No. LR24322 Type Current (A) Voltage (V) 983- (Z) S /D /W 10.0 mm 20 983- (Z) S /D /W 10.0 mm 20 20 AWG 22-18 recommend the sems slotted head in the options Internationl Approval Information Rated Impulse Withstand Voltage : 6000 V AWG 300 Application Group B, C 20-12 Screw Tightening Torque 10.0 lbfin 300 300 D, E B 20-12 20-12 1.13 lbfin 1.13 lbfin page 3/4 TECHNICAL DRAWING Description : 983(Z)-D Length of Connector (L) L = No. of Poles x Center to Center Spacing Description : 983(Z)-W Length of Connector (L) L = No. of Poles x Center to Center Spacing Description : 983(Z)-S Length of Connector (L) L = No. of Poles x Center to Center Spacing page 4/4 SECTION A - SERIES 98 Terminal Blocks for Printed Circuit Boards The use of flexible polyamide in this series of barrier strips provides greater resistance to breakage than other barrier strips made from more rigid and brittle materials. The screw and washer combinations are fixed together (SEMS type screw) to allow easier wire insertion. Screw connectors are supplied with one or two PCB pins per pole. The tab connectors provide a choice of tab and screw combinations to suit most design requirements a different tab arrangement can be supplied in each pole position for greater design flexibility. The variety of available tabs allows multiple wires to be connected to the same pole. Each product has a "How To Order" area as well as a complete listing of UL and CSA approval specifications, available options and accessories.