page 1/4
Screw and Tab Connectors for Printed Circuit Boards
983- (Z) S /D /W | 10.00 mm (0.394 in) Spacing - 2-26 poles
PICTURES
983-ZS Standard Slotted Screws 983-ZD Standard Slotted Screws 983-S Standard Slotted Screws
TECHNICAL INFORMATION
Description
Barrier strip connector
Allows two wires of the same size per contact from either direction
Block is offered with or without back barrier (see How to Order (Z) for more detail).
Standard product comes with a slotted screw.
(For combi/pozidriv screw, please see the options -CSS in the How to Order)
Technical Data
Center to Center Spacing: 10.000 mm (0.394 in)
Nominal Cross Section: 2.5 mm2 (3875 mils2)
Wire Stripping Length: 8.500 mm (0.335 in)
Recommended Hole Diameter in PC Board: 1.300 mm (0.051 in)
Bill of Materials
Molding : Polyamide, Self extinguishing UL 94, V-0
Color : Grey
Temperature limits :
Short Time : 140°C (284°F)
Continuous : 105°C (221°F)
Low Limit : -40°C (-40°F)
Comparative Tracking Index : CTI ? 600 V
Oxygen Index Rating : 25 %
Terminal Body: Tin plated copper alloy
PCB Pin: Tin plated copper alloy 0.8 x 1.0 mm (0.03 x 0.04 in.)
Screw and Washer: Zinc plated blue passivated, steel substrate M4
page 2/4
APROVAL INFORMATION
UL File No. E69841 | CSA File No. LR24322
Type Current (A) Voltage (V) Application
Group AWG Screw Tightening
Torque
983- (Z) S /D /W 20 300 B, C 20-12 10.0 lbfin
10.0 mm
983- (Z) S /D /W 20 300 D, E 20-12 1.13 lbfin
10.0 mm 20 300 B 20-12 1.13 lbfin
AWG 22-18 recommend the sems slotted head in the options
Internationl Approval Information
Rated Impulse Withstand Voltage : 6000 V
page 3/4
TECHNICAL DRAWING
Description :
983(Z)-D
Length of Connector (L)
L = No. of Poles x Center to Center Spacing
Description :
983(Z)-W
Length of Connector (L)
L = No. of Poles x Center to Center Spacing
Description :
983(Z)-S
Length of Connector (L)
L = No. of Poles x Center to Center Spacing
page 4/4
SECTION A - SERIES 98
Terminal Blocks for Printed Circuit Boards
The use of flexible polyamide in this series of barrier strips provides greater resistance to breakage
than other barrier strips made from more rigid and brittle materials.
The screw and washer combinations are fixed together (SEMS type screw) to allow easier wire
insertion. Screw connectors are supplied with one or two PCB pins per pole. The tab connectors
provide a choice of tab and screw combinations to suit most design requirements a different tab
arrangement can be supplied in each pole position for greater design flexibility. The variety of
available tabs allows multiple wires to be connected to the same pole.
Each product has a "How To Order" area as well as a complete listing of UL and CSA approval
specifications, available options and accessories.
