10 9 | 8 | 7 6 5 4 2 1 | 63.00 | f 55.00 | _ TYP F A ml mw sll A |__ 148.00 MAX | E KEEP OUT ZONE 45OMIN (2x) A 128.80 #0.10 LL 5.00MIN (2X)/>, /\ DATE CODE (YYDDD) PART NO. (87966-XXXX)/6 Jr 22.78 oe 15.70 - oe CULT TIlI tmollex | D \ Gon #1 T PIN #120-/ | NOTES: 141,00 ~$ 11.50 3.94 10.25 - 1, MATERIALS | 10.00MIN HOUSING - HIGH TEMP LCP GLASS FILLED. UL 94V-0, BLACK (2X) SECTION A-A EJECTORS - HIGH TEMP NYLON GLASS FILLED, UL 94V-0, BLACK TERMINALS - COPPER ALLOY c PLATING OPTION - PLS REFER TO SHEET 5. CARD SLOT ACCEPTS 1.27+0.10MM MODULE THICKNESS, (MEASURED OVER PC PADS) 4, RECOMMENDED MODULE LAYOUT SHALL BE AS PER JEDEC MO-237. PLS REFER TO SHEET 3. 5. PRODUCT IS PACKED INTO TRAYS. WRAP IN MOISTURE BARRIER BAG WITH SILICA GEL. B /6\, MOLEX LOGO, DATE CODE & PART NO, INDICATED ON HOUSING. /)\, DIMM MODULE SEATING PLANE FROM TOP OF PCB. SS] [ovary] GENERAL TOLERANCES DIMENSION STYLE SLE] DESGUINTS 7 > THIRD ANGLE 8. COPLANARITY FOR SOLDERTAILS SHALL NOT EXCEED 0.20MM. im 55] |sympots| (UNLESS SPECIFIED) MM ONLY NTS METRIC PROJECT NON WW SMA DRAWN BY DATE TITLE a 9, REFER TO PRODUCT SPEC. PS-87966-001 FOR PERFORMANCE ; SSS mm__|_INCH MSS S1Z\\/=0 [PLACES|E---[#--- _|CCTEH 2005/10/19 DDR2_ DIMM, 1.00MM PITCH SPECIFICATIONS. of ss F 3 PLACES|+ +--- CHECKED BY DATE 240 CKTS, SMT 10. THE KEEP OUT AREA IS THE AREA WHERE THE CONNECTOR IS ma _|S|G/=0 [2 PLACESEO10 |[+--- _SRRAMESH 2005/11/21 Sorzs|y 1PLACE [---. |+--- APPROVED BY DATE MOUNTED ONTO THE PCB, WHICH DOES NOT INCLUDE THE LATCH. |* 3 WO bortace = = GGLEE 9005/14/74 A KEEP OUT ZONE AS PER JEDEC SO-001. ws = a 2 ANGULAR + 1 MATERIAL NO. DOCUMENT NO. SHEET NO. aieraas F SD-87966-002 42. CONTACT MOLEX FOR AVAILABILITY OF PRODUCT OPTIONS. AEX DRAFT WHERE APPLICABLEL__EE TABLE - - 10F 5 tno <4 MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B2_| WITHIN DIMENSIONS __|A SjINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 | 6 | 5 | | 3 | 2 | 1 Rev. G 2012/01/11 40 | 9 8 7 6 5 4 3 2 1 33.10 REF | ] =| [=155 REF p=) 18 | Ss S S QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE =| |/3.10 REF im 585) |sympors| (UNLESS SPECIFIED) MM ONLY NTS METRIC [ Cl pRoveCTION Oo = = = mm INCH DRAWN BY DATE TITLE W_RRR/z W-0 7 PLACES |b -- 1 E--= ICCTEH 9005/10/19 DDR2 DIMM, 1.000MM PITCH od F 3 PLACES|+--- +--- CHECKED BY DATE 240 CKTS, SMT Oo 5 \W/=0 2? PLACES|+0.10 |+--- _[SRRAMESH 2005/11/21 Sorzay4 4 PLACE |--- +--- APPROVED BY DATE 7 2 oss : W/O 0 PLACE |= - COE No ZN NIT DOCUMENT NO. ! x SHEET NO. S208 ANGULAR + 1 . . - Qoees DRAFT WHERE APPLICABLE|_SEE TABLE SD-87966-002 2 0F 5 WOO <4 MUST REMAIN aIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B2 ip WITHIN DIMENSIONS JA SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 | 4 Rev. G 2012/01/11 10 9 7 6 5 4 3 2 1 RECOMMENDED MODULE LAYOUT FULL RADIUS (69.68) (61.67) mp \ CENTER OF MODULE cARD_ | [4.00 FULL RADIUS TYP _ [ 3.00 MIN H _ i a 4.00010 TYP REFER TO i] 0.10 @/c[B|Al Eee 4 20.78MIN 14 | Detail2 10.00 Zs t TY \_Detailt ; PIN #12 soonn | [B | PIN #1 Detail4 TYP 1.27 20.0 63.00 55.00 5 18REF SEE NOTE 3 1.50 20.10 133,35 0.15 ie] 0.10 @IclBlA] 0.10 +0.10 =| [/~+ 0.80:+005 70.05 0.10 OJc|BIA} 0.05 Oc] 2.50] =| ote 2.50 { 44, N | [ 3.8020: | /\ CHAMFER P 0.10 305 Pil] 4.00 MIN Xl a Detail2 250 0.20 0.15 " fb 4 [ Detail4 0.40 wn -| z Ssa00 DIMENSION STYLE SCALE DESIGN UNITS . S2s} [QUALITY] GENERAL TOLERANCES THIRD. ANGLE TIE BAR KEEP OUT ZONE do Ses) CM UNLESS SPECIFIED) MM ONLY NTS | METRIC | Cl eRovection Detail4 o = 2 2 mm INCH DRAWN BY DATE TITLE WSR iz\G7-0 [PLACES|IE--- [=---__CCTEH 2005/10/19 DDR2 DIMM, 1.00MM PITCH oo Se 3 PLACES|t+--- |4--- CHECKED BY DATE 240 CKTS, SMT m | \/=0 2 PLACES|t0.10.|4--- _ (SRRAMESH 2005/11/21 NOTES: Sousalt 1 PLACE [---. |+--- APPROVED BY DATE molex Anes =O [0 PLACE [= = GGLEE 2005/11/21 MODULE CARD USED IN PRODUCT TESTING ARE ls ZS ANGULAR 13 AATERIACNG- SOCUNENT-NO- SEES CHAMFER, Qoets DRAFT WHERE APPLICABLE|_SEE TABLE SD-87966-002 3 OF 5 moO <I MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B2 iy WITHIN DIMENSIONS JA SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 8 7 | 6 | 5 | 4 | 3 | 2 | 1 Rev. G 2012/01/11 10 2.45 20.05 pen #121 63.00 55.00 PIN #240 co OUT AREA Ts ITT | SE AAD TTT AAT ATT | _ 1.57 40.10 Len #1 DETAILS _/ @ 2,45 20.05 PIN enol 2 0.10|C|A-B Wy; joer Rev. G 2012/01/11 @ 2,45 20.05 73,00 65.00 141.00 REF. [B | A | r= 11.50 20.10 (2X) 164.00 REF a RECOMMENDED STENCIL THICKNESS = 150MM, 1.00 ~| ~~ 0.70 20.03 (240X) E }@0.10]c[A-B D 7.40 om Oo 2.50 +0.03 (240X) LW = [1 0.10|c|A-B 4 Ss 2S S QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS CJ THIRD ANGLE i 53] |sympois| (UNLESS SPECIFIED) MM ONLY NTS METRIC PROJECTION oO = = = mm INCH DRAWN BY DATE TITLE MSS 8) 2)\G/-0 [CPLACES|e---_[e--- _(CCTEH 2005/10/19 DDR2 DIMM, 1.00MM PITCH DETAILS od se F 3 PLACES|t--- |+--- CHECKED BY DATE 240 CKTS, SMT 0 S)\G/-0 [2 PLACES|+ 0.10 [+--- SRRAMESH 2005/11/21 =ozsezys 1 PLACE |E--- --- APPROVED BY DATE AES) |\G/-0 fo PLACE = GGLEE 2005/11/24 molex WS Seo ANGULAR + 1 MATERIAL NO. DOCUMENT NO. SHEET NO. Oo oexe DRAFT WHERE APPLICABLE|__ SEE TABLE SD-87966-002 4 0F 5 uo = MUST REMAIN SIZE) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B2 a WITHIN DIMENSIONS SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 4 10 9 8 7 6 5 4 3 2 1 ASSEMBLY VOLTAGE PLATING LATCH COLOR LUBRICATION PART NO. KEY POS. 87906-0001 0.764M (30H IN) MIN. GOLD ON CONTACT NO CENTRE BLACK aeV 2.544M (00H IN) MIN. TIN ON SOLDERTAILS 87966-0002 1.27HM (50H IN} MIN. NICKEL UNDERPLATE YES Ss eS S QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE tm S585] |sympots| (UNLESS SPECIFIED) MM ONLY NTS METRIC | Cl pROVECTION oO = = = mm INCH DRAWN BY DATE TITLE MW _RRAlZNG/-0 PLACES |E--- _[E--- _|CCTEH 2005/10/19 DDR2 DIMM, 1.00MM PITCH os 3 PLACES|+--- t--- CHECKED BY DATE 240 CKTS, SMT Oy & \W/=0 2? PLACES|+0.10. |+--- ISRRAMESH 2005/11/21 SOorsez 4 1PLACE |t--- |/--- APPROVED BY DATE as ees| |W/-0 [oPlace + GGLEE 2005/11/21 molex WW S 3a a ANGULAR +1 MATERIAL NO. DOCUMENT NO. SHEET NO. OQOE=e DRAFT WHERE APPLICABLE|__SEE TABLE SD-87966-002 5 OF 5 UGS =< _ N aIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B2 iy WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 | Fi Rev. G 2012/01/11