Data sheet
Creation date October 28, 2019 11:40:09 PM CET
Catalogue status 25.10.2019 / We reserve the right to make technical changes. 1
ConnectPower
CP-BBU 115-230VAC / 12VDC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
General ordering data
Delivery status Discontinued
Available until 2014-09-30
Type CP-BBU 115-230VAC / 12VDC
Order No. 9916280012
Version UPS control unit, 12 V
GTIN (EAN) 4032248217861
Qty. 1 pc(s).
Alternative product 1370050010
The UPS control unit together with the associated battery
module and the power supply unit form a complete DC
UPS system. In normal operation, the input voltage from
the UPS control unit is connected directly to the load. In
the event of a mains failure (drop of the DC input voltage)
the system switches instantly to battery operation.
Once the mains supply has been restored, the system
switches back to normal operation and the battery is fully
recharged by the integrated charger.
Three relay outputs, as well as three additional active
transistor outputs and a control input to lock battery
operation, provide full remote control by means of SPS or
DCS control. Numerous modes of operation and an easy-
to-use status display provide rapid fault diagnosis and
optimum customisation to the application.
Data sheet
ConnectPower
CP-BBU 115-230VAC / 12VDC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date October 28, 2019 11:40:09 PM CET
Catalogue status 25.10.2019 / We reserve the right to make technical changes. 2
Dimensions and weights
Width 72.5 mm Width (inches) 2.854 inch
Height 127.5 mm Height (inches) 5.02 inch
Depth 161 mm Depth (inches) 6.339 inch
Weight 950 g Net weight 1,142 g
Temperatures
Humidity at operating temperature 20 to 85% RH without
condensation
Humidity at storage temperature
20 to 90%
Operating temperature, max. 50 °C Operating temperature, min. -20 °C
Storage temperature, max. 85 °C Storage temperature, min. -20 °C
Operating temperature -20 °C...50 °C Storage temperature -20 °C...85 °C
Input
Connection range
AWG26-12 (0.1-4.0 mm²)
Input current 0.8 A @ 115 V AC; 0.5 A
@ 230 V AC
Input frequency 50/ 60 Hz Input fuse 2 A time-lag fuse (internal)
Input voltage (voltage mode input) 85...265 V AC; 120...300
V DC. typ. 115...230 V AC
±10%
Inrush Current Limitation
Thermistor
Surge protection Varistor Wire connection method Screw connection
Output
Battery charging current 3 A Battery voltage 13.65 V
Connection range AWG26-12 (0.1-4.0 mm²) Control at input voltage 0.2%
Mains failure bridge-over time for 115 V
AC 46 ms
Mains failure bridge-over time for 230 V
AC 226 ms
Max. residual ripple
< 50 mVeff
Output current max. 15 A / max. 9.0 A for
the power supply unit
Output power 180 W Output voltage 12 V
Output voltage type DC Wire connection method Screw connection
General data
Degree of efficiency at max. load
69%
EMC standards EN 55011, EN 55022, EN
55024, EN 61000-6-2, 3
Low Voltage Directive 73/ 23/ EWG Operating temperature -20 °C...50 °C
Protection degree
IP20
Standards DIN EN 50178, DIN EN
60950, IEC950
Status indication Green LED (full charge):
battery voltage > 14.75
V DC, Yellow LED (low
battery): battery voltage
< 11 Vdc, Yellow LED
(charging): BBU is loading
battery, Red LED (error): no
AC input voltage, Red LED
(reversed battery): battery
poles are reversed
System data
Output current max. 15 A / max. 9.0 A for
the power supply unit
Data sheet
ConnectPower
CP-BBU 115-230VAC / 12VDC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date October 28, 2019 11:40:09 PM CET
Catalogue status 25.10.2019 / We reserve the right to make technical changes. 3
Insulation coordination
Humidity at operating temperature 20 to 85% RH without
condensation
Humidity at storage temperature
20 to 90%
electrical isolation, I/O rail 3 kV electrical isolation, input-earth 1.5 kV
electrical isolation, input-output 3 kV electrical isolation, output-earth 0.5 kV
Signalling
Status indication Green LED (full charge):
battery voltage > 14.75
V DC, Yellow LED (low
battery): battery voltage
< 11 Vdc, Yellow LED
(charging): BBU is loading
battery, Red LED (error): no
AC input voltage, Red LED
(reversed battery): battery
poles are reversed
Approvals
Institute (CSA) Certificate No. (CSA)
200039-1196635
Institute (cULus) Certificate no. (cULus)
E196651
Ratings IECEx/ATEX/cUL
Certificate no. (cULus) E196651
Classifications
ETIM 6.0 EC002850 ETIM 7.0 EC002850
eClass 9.0 27-04-06-92 eClass 9.1 27-04-92-01
eClass 10.0 27-04-06-92 UNSPSC 30-21-18-01
Approvals
Approvals
ROHS Conform
Downloads
Approval/Certificate/Document of
Conformity ECC1628_02_09.pdf
Data sheet
ConnectPower
CP-BBU 115-230VAC / 12VDC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Creation date October 28, 2019 11:40:09 PM CET
Catalogue status 25.10.2019 / We reserve the right to make technical changes. 4
Electric symbol
