ISC-1210
Vishay Dale
www.vishay.com
58 Document Number 34060
Revision 28-Aug-02
For technical questions, contact Magnetics@vishay.com
Surface Mount, Molded, Shielded Inductor
— Dale
— Inductance value
— Date code
FEATURES
•Molded construction provides superior strength and
moisture resistance.
•Tape and reel packaging for automatic handling, 2000/
reel, EIA 481.
•Compatible with vapor phase, infrared and wave soldering
methods.
•Shielded construction minimizes coupling to other components.
PART MARKING
ELECTRICAL SPECIFICATIONS
Inductance Range: .01µH to 100µH.
Inductance Tolerance: ± 20% for 0.01µH to 0.82µH.
± 10% for 1.0µH to 100µH standard. 2%, 3% and 5%
(also 1% on some values) tolerances available.
Temperature Range: - 55°C to + 125°C.
Coilform Material: Non-magnetic for 0.01µH to 0.10µH.
Powdered Iron for 0.12µH to 100µH.
STANDARD ELECTRICAL SPECIFICATIONS
TEST EQUIPMENT
•H/P 4342A Q meter with Vishay Dale test fixture or equivalent.
•H/P 4191A RF Impedance Analyzer (for SRF measurements).
•Wheatstone Bridge.
TEST SELF- RATED
FREQ. RESONANT DCR DC
IND. Q L & Q FREQ. MIN. MAX. CURRENT
(µH) TOL. MIN. (MHz) (MHz) (Ohms) (mA)
0.010 ± 20% 50 50 1000 0.10 810
0.012 ± 20% 50 50 1000 0.11 750
0.015 ± 20% 50 50 1000 0.12 720
0.018 ± 20% 50 50 1000 0.13 690
0.022 ± 20% 45 50 1000 0.15 640
0.027 ± 20% 45 50 1000 0.17 610
0.033 ± 20% 45 50 1000 0.18 585
0.039 ± 20% 40 50 1000 0.24 530
0.047 ± 20% 40 50 1000 0.26 495
0.056 ± 20% 40 50 1000 0.28 485
0.068 ± 20% 40 50 1000 0.35 475
0.082 ± 20% 38 50 900 0.45 460
0.10 ± 20% 36 50 700 0.50 450
0.12 ± 20% 40 25.2 500 0.20 630
0.15 ± 20% 40 25.2 470 0.20 600
0.18 ± 20% 40 25.2 400 0.24 580
0.22 ± 20% 40 25.2 330 0.30 565
0.27 ± 20% 40 25.2 310 0.33 500
0.33 ± 20% 40 25.2 280 0.36 475
0.39 ± 20% 40 25.2 230 0.40 465
0.47 ± 20% 40 25.2 220 0.44 460
0.56 ± 20% 40 25.2 200 0.46 455
0.68 ± 20% 40 25.2 180 0.48 450
0.82 ± 20% 40 25.2 160 0.50 450
1.0 ± 10% 30 7.96 120 0.60 400
1.2 ± 10% 30 7.96 110 0.65 390
1.5 ± 10% 30 7.96 90.0 0.75 370
1.8 ± 10% 30 7.96 85.0 0.85 350
2.2 ± 10% 30 7.96 65.0 0.90 320
2.7 ± 10% 30 7.96 60.0 1.00 290
3.3 ± 10% 30 7.96 60.0 1.10 270
3.9 ± 10% 30 7.96 58.0 1.20 250
4.7 ± 10% 30 7.96 52.0 1.25 220
5.6 ± 10% 30 7.96 50.0 1.40 210
6.8 ± 10% 30 7.96 40.0 1.60 205
8.2 ± 10% 30 7.96 35.0 1.65 195
10.0 ± 10% 30 2.52 30.0 2.00 185
12.0 ± 10% 30 2.52 24.0 2.30 175
15.0 ± 10% 30 2.52 20.0 2.50 165
18.0 ± 10% 30 2.52 17.0 2.70 155
22.0 ± 10% 30 2.52 16.0 3.10 150
27.0 ± 10% 30 2.52 14.5 3.30 125
33.0 ± 10% 30 2.52 14.5 5.10 115
39.0 ± 10% 30 2.52 14.0 5.90 105
47.0 ± 10% 30 2.52 13.0 8.00 100
56.0 ± 10% 30 2.52 11.5 10.0 95
68.0 ± 10% 30 2.52 11.0 10.0 90
82.0 ± 10% 30 2.52 11.0 11.0 85
100.0 ± 10% 30 0.796 6.0 12.0 80
± 10%
INDUCTANCE
TOLERANCE
ISC-1210
MODEL
10µH
INDUCTANCE
VALUE
DESCRIPTION
*Recommended minimum spacing between components.
DIMENSIONS in inches [millimeters]
0.030
[0.762]
Typ.
0.126 ± 0.008
[3.20 ± 0.203]
0.028 ± 0.004
[0.711 ± 0.102]
Typ.
0.006
[0.152]
Ref.
Typ.
0.098 ± 0.008
[2.49 ± 0.203]
0.087 ± 0.008
[2.21 ± 0.203]
Guidelines for
Parallel Component
Printed Circuit
Mounting Pads on
ISC-1210
Chip Inductors
0.118
[3.0]
0.118
[3.0]
0.020*
[0.508]
0.039
[1.0]
0.138
[3.5]
0.070
[1.8]
0.039
[1.0]
0.040
[1.02]
0.073 [1.85]
Ref.
SAP PART NUMBERING GUIDELINES (INTERNAL)
PRODUCT FAMILY SIZE
See the end of this data book for conversion tables
INDUCTANCE
VALUE
PACKAGE
CODE TOL.
IS C 1210 SY 100 K
