10 8 7 6 5 4 3 2 1 q Eafe 1, (RHA MATERIAL ADDY > RUPE (PA). $F29 88). #927. ULI4AV-O a a HOUSING: POLYAMIDE NATURAL(WHITE) .GLASS FILLED .UL94V-0 F - | qt FIFaxr-F oy RVI r= YYW7 74 (PPS). HF 250 (RE). #7 ARM. ULQAV-0 F <t (es ACTUATOR : POL YPHENYLENE SULFIDE.NATURAL(BROWN),GLASS FILLED UL94V-0 = r -8 : Uy =O. TERMINAL : PHOSPHOR BRONZE(t=0.2) a8 : YY WHt=0.2) { FITTING NAIL : PHOSPHOR BRONZE(t-0.2) LX AS-78 ODOR 7 2. xy xthit PLATING FITTING NAIL FOR PREVENTION OF PEELING OF P,C.B PATTERN. PIF ILSeROLE RRB R- 3H ZN Yue -F-VERNGDORVE. RUSARARHUDOXVER. BED - WHEN ACTUATOR IS OPEND OO am 1b) MISALIGNMENT OF SOLDER TAILS AND FITTING NAILS FROM yX say Y . : : . EH a -px] TR VER BIS Ote C RING UPPER DIRECTION : 0.05 MAX. LOWER DIRECTION : 0.2 MAX A UNDER RUATING : NICKEL. PLATING Ae Se ene ecu, E = LN : RO.3. FPComeBicomszuce. E SSF) | tthe 0-2 6 (1.0 MICROMETER MINIMUM) RO.3 MUST NOT BE OVERLAPPED TO PATTERN OF FPC. TERMINAL (C9) * TBE? OH. BIGHT Dy ey 2-1 OME TS - (PITCH) NAIL | 18 CKTS AND MOER THAN 18 CKTS PLACED 2 POINTS. RX y (1.0 nmELE) / 8~16 CKTS PLACED 1 POINT ON HOUSING CENTER. FX ye tay TeX y (1,.0 embLE 8. Yus-F- WOH. 0.10 MAXIMUME+s. __ TIN BASED PLATING SOLDER TAIL COPLANARITY IS 0.10 MAXIMUM. | ! Kobe aine Ge earns ENARSORE | (4,0 MICROMETER MINIMUM) ELV AND ROHS COMPLIANT: 19.6 | 15.5 | 14.57} 14.5 | 52892-3033 | 30 ; 4.9 0.6 18.6 | 14.5 | 13.57] 13.5 -2833 | 28 pore er D I ] 4.4 7.6 | 13.5 | 12.57] 12.5[ 4 -2633] 26 | 2 a 1 1 _ {0.45 16.6 | 12.5 [57] 1.5 -2433 | 24 |_| H | H |_| I5.6 | 115 | 10.57} 10.5 -2233 | 22 LN \ { \ 14.6 | 10.5 | 9.57} 9.5 -2033 } 20 | OBSS1 AIe7 i \ NAITO y i4.1 | 10.0 | 9.07 | 9.0 933 | 19 | CKT.NO, | SIDE MARK B PIFAI-Z HOUSING 2 5 I3.6 | 9.5 | 8.57 | 8.5 1833 | 18 +0. - ACTUATOR L : 3.1 | 9.0 | 8.07 | 8.0 -1733 Iv C GND) 12.6 | 8.5 | 7.57] 7.5 -1633 | _|6 c A s Wy ane . FITTING NAIL BOTTOM SIDE) 2.1 | 8.0 | 7.07 | 7.0 ~1533 | 5 + , Zz 1.6 | 7.5 | 6.57 | 6.5 -1433 14 | | J YY]? -$-WwWiWi,, a oe = ll. | 7.0 [6.07] 6.0 -1333 | 13 | = 4 =) S li S\) 0.6 | 6.5 |5.57| 5.5 233 | 12 | SS eee i RK 10.1 | 6.0 [5.07] 5.0 4 -1133 | 1 (RO.27) 4 \ W A / . (AKT) 9.6 | 5.5 | 4.57] 4.5 -1033 10 (2.05) McnctH To 8.6 | 4.5 | 3.57] 3.5 | 52892-0833 | 8 CONTACT POINT) EMBOSSED TAPE SECT. W-W D C B (A) ORDER No. 4-*-8$ HG, P CONNECTOR SERIES NO. : 52892-xx22 es Ss GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE Ses (UNLESS SPECIFIED) MM ONLY TT METRIC | Cl PROJECTION | = = = DRAWN BY DATE TITLE we 18] 1Q UNDER +02. |TMORISHITA 2012/09/20 ON SING wsau R/A yg = o CHECKED BY DATE 2 S510 OVER SOUNDER | 0.25 {TAKAHASHI 2012/09/25 (LOWER CONTACT) S 2 = = WW 3QOVER +0.53. APPROVED BY DATE A Hs2=S =* MORIKAWA 2013/04/05 molex A S 33 =| | ANGULAR +3. MATERIAL NO. DOCUMENT NO. SHEET NO. no 2=t DRAFT WHERE APPLICABLE SEE CHART SD-52892-044 1 0F 3 Pe A = MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A i WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_J_ME_S | 9 | B | 7 6 | 5 | 4 | 3 | 2 | Rev G 2012/01/25 _10 9 8 7 6 5 4 3 2 4 ; 0.5(N+ 1)07 0.5(N+ 107 3.45 SNIP 845 0.5'} 0.5(N- 198 [0,5 0590. 5(N- 198 0,578 . +0.04 0,570 thee (0.3) 0,508 0,3570-03 0.5%5 0,309 Cea 2-R0.3 A\ cae (0.25) (PITCH CAZEFESRR) | (NON-ACCUMULATIVED ___ | | __ AVA AAAS WAM | A YO naAwAG YBUABRAAG B OVA ALAA AY Ra AACA & | m YOU AY a WY ge Wynn ww ir WYMwnnnAnY ee __| | QL AIAIAAIZIANG b 1 VUBABMAMY b | o | L f fy - 7 - | D BE | 1.25 1.25 BAF P CHES OFF CHEE APPLICABLE FPC. APPLICABLE FFC (1.6) 1.85 1.85 (1.6) RECOMMENDED DIMENSION RECOMMENDED DIMENSION ' CEE UBS 0,370:03) CLEAU BS 0,3%0-93) CONNECTOR s # (THICKNESS:0, 370-03 ) (THICKNESS:0, 30-03 ) INA -VRE POSITION BaeSi no parreRN HBR L AT Dh FPC/FFCk>< ABOUT FPC/FFC c RECOMMENDED P.C.BOARD FT SIRE BLM BD SASH LET. PATTERN DIMENSION MABBIC 3 T A REMSD ums ESO uM eH LIT. _.. OE RECOMMENDED PUNCHING DIRECTION: FROM CONDUCTOR SIDE TO STIFFENER SIDE (77 bh) RECOMMENDED CONDUCTOR SPEC: SOFT COPPER FOIL (MOUNTING. SIDE) RECOMMENDED CONDUCTOR THICKNESS: 35 MICROMETER OR 50 MICROMETER BS<-ANE = 100 em FPCtc2"tABOUT FPC Se727HO# =: 100% BRT AMIE 4 SR EHBRL ET. -A7 40425 uM EHRL ET. REFERENCE SCREEN THICKNESS : 100m BARRA RL REFERENCE SCREEN OPEN RATIO : 100% Mh. PAO OH CMAR OMAR OETOT. Rath LAGRO, DMORL ET. RECOMMENDED STIFFENER MATERIAL: POLYIMIDE RECOMMENDED BASE FILM THICKNESS: 25 MICROMETER RECOMMENDED ADHESIVE: THERMOSETTING ADHESIVE B NOTE: PLEASE PUT APPROPRIATE AMOUNT OF ADHESIVE ON ADHEREND BECAUSE THERE IS A POSSIBILITY THAT THE EXTRA ADHESIVE CAUSES THE DEFECT IN ELECTRICAL CONTINUITY. = S Ss GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS cis HIRD NGLE ses (UNLESS SPECIFIED) MM ONLY METRIC PROJE A ION eeu DRAWN BY DATE TITLE RRR|z 1Q UNDER +02. |TMORISHITA 2012/09/20 0.5MM FPC CONN ZIF R/A S =x E OVER UNDER CHECKED BY DATE HOUSING ASSY ~ = BS |5/10 30 0.25 {TAKAHASHI 2012/09/25 (LOWER CONTACT) S 2 = = WW 3 QOvER +03. APPROVED By DATE A ASS=S 0. MORIKAWA 2013/04/05 molex S 3H ra ANGULAR +3 MATERIAL NO. DOCUMENT NO. SHEET NO. no 2=t DRAFT WHERE APPLICABLE SEE SHEET 1 SD-52892-044 2 OF 3 PE 3 = _ MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A i WITHIN DIMENSIONS A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_J_ME_S Rev G 2012/01/25 9 8 7 6 | 3 | 4 | 3 | 2 |10 9 8 7 6 5 4 3 2 4 HSC o@@iid 2 TERB BAA CRE CRONE AELET. PRESENCE OR ABSENCE OF THE GROOVE TO HOUSING IS PRESENT. | TYP.(2) | oO T = oy ] I I HA a | S a | | | | | [ | i L | | | i | | | | | | | | | J Jey |p yy | T T T T T T T T T T T T T T T T T T T T T T T T T 1 T T T T eeu eee mm Mm Ty nai mim mm dom im im im om PPP PPP PP PE ee ee ee NOS Y TBR ND DY TBM & NO GROOVE HOUSING GROOVED HOUSING es S GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE Ses (UNLESS SPECIFIED) MM ONLY 7 METRIC C1 BROVECTION = = mz DRAWN BY DATE TITLE & &] Z/ 19 UNDER +02. |IMORISHITA 2012/09/20 0.5MM FPC CONN ZIF R/A S = ( OVER UNDER == CHECKED BY DATE HOUSING ASSY + = 315/10 30 +0.25 TAKAHASHI 2012/09/25 (LOWER CONTACT) S 2 = = i 3Q0VER +0.53. APPROVED BY DATE HIZ=es = MORIKAWA 2013/04/05 molex S 33 =| | ANGULAR +3. MATERIAL NO. DOCUMENT NO. SHEET NO. no 2=t DRAFT WHERE APPLICABLE SEE SHEET 4 SD-52892-044 3 OF 3 PE 3 = _ MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A iB WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_J_ME_S Rev G 2012/01/25 9 8 7 6 | 3 | 4 | 3 | 2 |10 9 8 7 6 5 4 3 2 4 Stac NOTES |, SSnRN AC DL VCIABR SD-52892-044 a@BiR Ral RE DETAILED DIMENSION, SEE SD-52892-044 : ~ F 2. MOMS: 1000 /'U-I/L PETES \ J NUMBER OF CONNECTORS : lOOOPCS/REEL VN f 3. UKFDRA LEAD TAPE LENGTH slg ae) 20PCS.UN Ky DF FARE CLIIAZ PULL OUT y <> 3 L | TOP TAPE BONDED PART. (EMPTY) DIRECTION TIL 8 7a & DIRECTION Wl) Ame meres | gts COMPONENT (EMPTY) OT L A00MIN SUPPLIER AQMIN. + Fe 4. ANF 7 OMB C20. IECB0286-3 eR COVER TAPE PEELFORCE IS DEFINED BY IEC60286-3. 5. AE (MATERIAL) $+ 7FT (CARRIER TAPE) : RUPOLL LY (POLYPROPYLENE) PhwIFTI(TOPTAPE): PET , PE , PEF (f10) IJ)L (REEL) : RY AFLY (PS) <YH4 Fhe eO> POLYSTYRENE (PS) <RECYCLE MATERIAL CONTAINED> oO (120) 6. ELV &eROHS#OR ELV AND RoHS COMPLIANT DETAIL "F* ag S GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE sss (UNLESS SPECIFIED) MM ONLY TT METRIC | Cl PROJECTION eon DRAWN BY DATE TITLE _, 2 & |g) 40 UNDER ya- (MORISHITA 2012/09/20 EMB OSS Ee hon a o CHECKED BY DATE . at = B35 10 OVER SOUNDER |+--- TAKAHASHI 2012/09/25 HOUSING ASSY US f= su OVER ___ [APPROVED BY DATE nS ees"|30 + MORIKAWA 2013/04/05 molex Wi S = 8 =| | ANGULAR #+--- MATERIAL NO. DOCUMENT NO. SHEET NO, ooe=e DRAFT WHERE APPLICABLE SEE CHART SD-52892-045 1 0F 2 PE 3 = _ MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 0 iB WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION a e"SuIOnE 9 8 7 6 fs ff40 | 9 | 8 7 6 5 | 4 | 3 | 2 4 slAwWLA (7.3) <____ PULL OUT DIRECTION (4.45) r slew cs hy DFT 52892-4*22 PULL OUT DIRECTION (4,45) TOP TAPE _ 52892-#22 . KywIF-7 DEODET**LE (1.125) >; 10 _fove 4 | x : | NEUE 4 4 4 I malo =~ | 3 + a | ~(% | a F n i : [ Sf) T | g a 1 | + Qi | N : q a} A / L T v = | | 7 | Of oS, So , ~* @ -9- = 4 3 0.05 Lo +3 (2) Li Z |+0.1 40.2 D 0.520205 lo 6) HEY 0.5 6 G50 LM Tso. 4 | RiivF 407 mace SS | 3.4203 32mmiet-'JrzZ " ACCUMULATIVE 03 40.1 0.1 40.1 so2 . PITCH 40#02 3.4 Ol.5 0 \2 4 Revs 40 32mm WIDTH CARRIER TAPE ACCUMULATIVE SECT 7272 21.6 19.9 I6.1 15.9 52892-3033 30 __ | PITCH 4Q *0.2 20.6 18.9 15. | 14.9 -2833 28 32 37.4 | 33.4 [19.6 | 17.9 | 14.1 | 13.9 =2633 | 26 24mmigty PFT 8.6 | 16.9 | [3.1 | 12.9 =2433 | 24 SECT :Y- 7.6 | 15.9 | 12.1 | 119 =2233 | 22 24mm WIDTH CARRIER TAPE ee ate Tait 0.8 =3033 1 56 c 6.1 | 14.4 | 10.6 | 10.4 1933 19 _ $5.95) | 5.6 | 13.9 | 10.1 | 9.9 = 1833 18 5.1 | 13.4 | 9.6 | 9.4 1733 IT (1.35) 14.6 | 12.9 | 9.1 | 8.9 - 1633 6 4.1 | 12.4 | 8.6 | 8.4 = 1533 15 | 24 29.4 | 25.4 7365 [19 | 8.1 17.9 = 1433 |_14 3.1 | 11.4 | 7.6 | 7.4 - 1333 3 12.6 | 10.9 | 7.1 | 6.9 1233 2 pee ere bereerererl cere cere 2.1 | 10.4 | 6.6 | 6.4 | - 133 I w 1.6 | 9.9 | 6.1 | 5.9 -1033 [10 B Ny 10.6 | 8.9 | 5.1 | 4.9 | 52892-0833 8 Vv Wie mem EMBOSSED PACKAGE ta CARRIER TAPE WipTH| E | 0) | () | (B) | (A) PaRDeR No #-2-a8 (CIRCUIT SECT 2 Xx DIMENSION STYLE CONE OR Re O 1 52892 nx22 Rae GENERAL TOLERANCES THIRD ANGLE sss (UNLESS SPECIFIED) MM ONLY TT METRIC | CIBERD ANGE | ono DRAWN BY DATE TITLE _, 2 & |g) 40 UNDER ya- (MORISHITA 2012/09/20 EMB OSS Ee hon a a o CHECKED BY DATE . an sees JOOVER SOUNDER | +--- KTAKAHASHI 2012/09/20 (LOWER CONTACT) ds 22 <0 OVER ___ |APPROVED BY DATE A nS ees"|30 + MORIKAWA 2013/04/05 molex Wi S = 8 =| | ANGULAR #+--- MATERIAL NO. DOCUMENT NO. SHEET NO, ooe=e DRAFT WHERE APPLICABLE SEE CHART SD-52892-045 2 0F 2 PE 3 = _ MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 0 iw WITHIN DIMENSIONS AS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_J_ME_S 9 B 7 6 | 5 | 4 | 3 | 2 | Rev G 2012/01/25