Transient Voltage Suppressor Features: * Glass Passivated Junction * Low Incremental Surge Resistance, Excellent Clamping Capability * Low Profile Package With Built-In Strain Relief for Surface Mounted Applications * 600W Peak Pulse Power Capability with a 10/1,000s Wave Form, Repetition Rate (duty cycle): 0.01% * Very Fast Response Time * High Temperature Soldering Guaranteed : 250C/10 seconds at Terminals Mechanical Data * * * * Case: JEDEC DO-214AA molded plastic over passivated chip Terminals : solder plated, solderable per MIL-STD-750, method 2026 Polarity : forint-directional types the color band denotes the cathode, which is positive with respect to the anode under normal TVS operation Mounting position : any Weight: 0.002oz, 0.64g Devices for Bidirectional Applications For bi-directional devices, use suffix C or CA (e.g. SMBJ10C, SMBJ10CA). Electrical characteristics apply in both directions. Maximum Ratings and Thermal Characteristics (TA=25C unless otherwise noted) Characteristic Symbol Value Unit Peak power dissipation with a 10/1,000s waveform (Note 1,2, Fig.1) PPPM Min. 600 W Peak pulse current with a 10/1,000s waveform (Note 1) IPPM See Next Table A Typical thermal resistance, junction to ambient (Note 2) RJA 100 C/W Peak forward surge current, 8.3ms single half sine-wave uni-directional only (Note 3) IFSM 100 A Typical thermal resistance, junction to ambient RJL 20 C/W TJ, TSTG -55 to +150 C Operating junction and storage temperature range Note: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2. (2) Mounted on minimum recommended pad layout. (3) Mounted on 0.2 x 0.2 (5mm x 5mm) copper pads to each terminal. www.element14.com www.farnell.com www.newark.com Page <1> 25/02/13 V1.0 Transient Voltage Suppressor Electrical Characteristics (TA = 25C) Dynamic Part Number V VWM @IT Min. Max. SMBJ10A 11.1 12.3 SMBJ11A 12.2 SMBJ130 IRM IPPM VWM V 10 35.3 17 13.5 11 33 18.2 144 176 130 2.6 231 SMBJ130A 144 159 130 2.9 209 SMBJ13A 14.4 15.9 27.9 21.5 2.3 259 178 197 V 13 1 160 uA IPPM A SMBJ160A mA VC 5 SMBJ22A 24.4 26.9 22 16.9 35.5 SMBJ33A 36.7 40.6 33 11.3 53.3 SMBJ48A 53.3 58.9 48 7.8 77.4 SMBJ58A 64.4 71.2 58 6.4 93.6 SMBJ7.0A 7.78 8.6 7 50 12 200 www.element14.com www.farnell.com www.newark.com Page <2> 25/02/13 V1.0 Transient Voltage Suppressor www.element14.com www.farnell.com www.newark.com Page <3> 25/02/13 V1.0 Transient Voltage Suppressor Package Outline Dimensions DO-214AA(SMB) Dim. Min. Max. A 4.3 4.7 B 3.3 3.7 C 2 2.3 D 5.05 5.55 E 0.1 0.3 F 0.95 1.55 G 0.2 Max. H 2.1 2.5 I 1.85 2.15 Dimensions : Millimetres Soldering Footprint Package Information Device SMBJ10A-13-F SMBJ11CA-13-F SMBJ130A-13-F SMBJ130CA-13-F SMBJ13CA-13-F SMBJ160CA-13-F SMBJ22CA-13-F SMBJ33CA-13-F SMBJ48A-13-F SMBJ58A-13-F SMBJ7.0CA-13-F Package Shipping DO-214AA(SMB) 3,000 / Tape & Reel Dimensions : Millimetres www.element14.com www.farnell.com www.newark.com Page <4> 25/02/13 V1.0 Transient Voltage Suppressor Part Number Table Description Part Number SMBJ10A-13-F SMBJ11CA-13-F SMBJ130A-13-F SMBJ130CA-13-F SMBJ13CA-13-F Transient Voltage Suppressor SMBJ160CA-13-F SMBJ22CA-13-F SMBJ33CA-13-F SMBJ48A-13-F SMBJ58A-13-F SMBJ7.0CA-13-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <5> 25/02/13 V1.0